Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Superconducting microwave cavities and Josephson junctions

T. I. Smith

Published Apr 1, 1974• 9 citations
Publisher

Abstract

The possibility of using very-high-Q superconducting microwave cavities to obtain a strong coupling between the electromagnetic field and a Josephson junction has prompted a study of such systems. Expressions have been obtained describing the dc I-V characteristic of a junction biased so that the Josephson radiation frequency is near a resonance of the cavity in which it is located. The rf power coupled into an X-band (10 GHz) TE011 mode cavity from a weakly coupled junction is approximately 3×10−13 I02 Q W, where I0 is the critical current of the junction and Q is the cavity Q. When the coupling between the junction and cavity is large enough, the I-V characteristic becomes multiple valued and the power coupled to the cavity depends on the state of the system. The maximum power which can be coupled to the cavity is approximately 0.58I0Vdc, where Vdc is the voltage required to bias the junction to the resonant frequency of the cavity.

DOI
10.1063/1.1663507

Related papers

Josephson junctions in superconducting coplanar DC bias cavities: Fundamental studies and applications

Felix E. Schmidt

This thesis investigates fundamental properties of Josephson junctions embedded in microwave circuits, and an application arising from this hybrid approach. We used the versatility of superconducting coplanar DC bias cavities to extract previously inaccessible information on phase coherent and subgap mechanisms of graphene Josephson junctions. Chapter 1 gives an introduction to the technology of Josephson field effect transistors, among which graphene junctions show promise for future improvements in quantum computation. Together with an overview of the Josephson effect in superconducting-semiconducting systems, we introduce the concept of coplanar DC bias cavities for probing Josephson junctions at gigahertz frequencies. In chapter 2, we describe the experimental methods developed for carrying out the subsequent measurements. We include details on fabrication, material properties and measurement setup. Results of graphene Josephson junctions embedded in DC bias microwave resonators are presented in chapters 3 and 4. By following the resonance frequency and losses of the circuit, we are able to extract the junctions’ Josephson inductance and subgap resistance. Studying the nonlinear power and bias current response reveals further information on the underlying loss mechanisms and current phase relation. We turn to an application of our hybrid bias cavity – Josephson junction devices to detect small, low-frequency currents in chapter 5. Our device is competitive with state-of-the-art techniques for microwave radiation detection and, with minor modifications, should be able to outperform existing technologies by orders of magnitude. Finally, we conclude the presented work in chapter 6 and provide an outlook on potential future research.

•Jul 28, 2020•0 citations

THE JOSEPHSON JUNCTION AS A 100 GHz OSCILLATOR-MIXER,

Andrew Longacre, Sidney Shapiro

Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)

•Apr 1, 1970•1 citation

Microwave coupling of frequency-locked Josephson junction arrays

Insang Song, Yongheum Eom, Gwangseo Park +2 more

A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.

Applied Physics Letters•Jun 16, 1997•8 citations

Josephson voltage standard microwave circuits operating at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +1 more

A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•3 citations

Basic Josephson tunnel parameters at microwave frequency—Strong temperature variations

S. Rudner, T. Claeson

Unexpected partly dramatic temperature dependences were registered for the basic tunnel parameters used to characterize a Josephson junction. Measurements of the magnetic field variation of the microwave-power reflection, i.e., a mapping of the Josephson plasma resonance, enabled determinations of the rf small-voltage resistance RJ, the cosφ amplitude ζ, and the effective junction capacitance C in both Pb-O-Pb and PbTl-O-Pb junctions. The uncertainties in the parameter values are large, particularly in the low temperature values of ζ, for which we confirm earlier estimates of ζ, but as the superconducting transition temperature Tc is approached, ζ increases rapidly and goes through a positive maximum close to +1 before it decreases towards zero at Tc. Also, RJ displays a pronounced maximum in the same temperature interval; it decreases rapidly within a narrow range below the temperature of the maximum before it again increases slowly well below Tc. The location in temperature for the two maxima depends upon the barrier via the critical current density, but seems to be material independent. Well below Tc, the ratios of RJ to the normal-state tunnel resistance are also affected by the barrier transmission. These latter properties seem hard to explain within a model based only on the relaxation of the order parameters in the superconductors. A considerable decrease in C close to Tc can be explained by temperature-dependent surface losses in the junction electrodes. The Q-value associated with these could be determined as a function of temperature. In accordance with previous measurements, the Josephson current IJ is reduced at low temperature in small high-resistance tunnel junctions. Smaller deviations in IJ from theoretical estimates can be explained by strong coupling effects.

Journal of Applied Physics•Nov 1, 1979•13 citations

Voltage locking between superconducting weak links via impedance coupling

Dai Yuan-Dong, Y. H. Kao

Frequency locking effects in two interacting Josephson junctions are investigated. The junctions are described in the usual resistively-shunted-junction (RSJ) model and coupling between junctions is provided by a resonant circuit. The system can be used to simulate interactions between superconducting weak links in a resonant cavity or via a general impedance shunt. Various types of v-i curves in the voltage locking region are obtained in this calculation by using a first harmonic approximation in the high-frequency regime. Stability of order parameter phase oscillations for two identical junctions in the voltage-locked region is examined. We also show that dissimilar junctions can be synchronized in a resonant cavity using a common series bias current.

Journal of Applied Physics•Jun 1, 1981•16 citations
The possibility of using very-high-Q superconducting microwave cavities to obtain a strong coupling between the electromagnetic field and a Josephson junction has prompted a study of such systems. Expressions have been obtained describing the dc I-V characteristic of a junction biased so that the Josephson radiation frequency is near a resonance of the cavity in which it is located. The rf power coupled into an X-band (10 GHz) TE011 mode cavity from a weakly coupled junction is approximately 3×10−13 I02 Q W, where I0 is the critical current of the junction and Q is the cavity Q. When the coupling between the junction and cavity is large enough, the I-V characteristic becomes multiple valued and the power coupled to the cavity depends on the state of the system. The maximum power which can be coupled to the cavity is approximately 0.58I0Vdc, where Vdc is the voltage required to bias the junction to the resonant frequency of the cavity.
This thesis investigates fundamental properties of Josephson junctions embedded in microwave circuits, and an application arising from this hybrid approach. We used the versatility of superconducting coplanar DC bias cavities to extract previously inaccessible information on phase coherent and subgap mechanisms of graphene Josephson junctions. Chapter 1 gives an introduction to the technology of Josephson field effect transistors, among which graphene junctions show promise for future improvements in quantum computation. Together with an overview of the Josephson effect in superconducting-semiconducting systems, we introduce the concept of coplanar DC bias cavities for probing Josephson junctions at gigahertz frequencies. In chapter 2, we describe the experimental methods developed for carrying out the subsequent measurements. We include details on fabrication, material properties and measurement setup. Results of graphene Josephson junctions embedded in DC bias microwave resonators are presented in chapters 3 and 4. By following the resonance frequency and losses of the circuit, we are able to extract the junctions’ Josephson inductance and subgap resistance. Studying the nonlinear power and bias current response reveals further information on the underlying loss mechanisms and current phase relation. We turn to an application of our hybrid bias cavity – Josephson junction devices to detect small, low-frequency currents in chapter 5. Our device is competitive with state-of-the-art techniques for microwave radiation detection and, with minor modifications, should be able to outperform existing technologies by orders of magnitude. Finally, we conclude the presented work in chapter 6 and provide an outlook on potential future research.
Abstract : The term 'Josephson effects' refers to a number of unusual properties of current flow through a barrier or weak link between two superconductors. Such a structure--called a Josephson junction--gives rise to frequency conversion effects that suggest its use as an oscillator-mixer in the millimeter and submillimeter region. Such a device would offer high sensitivity, broad bandwidth, tunability, and, in certain modes of operation, the possibility of conversion gain. These frequency conversion effects were observed in the range of 100 GHz to 600 GHz and beyond. The junctions were driven by a 75 GHz or 25 GHz klystron while coupled either to a coaxial cavity resonant at 20 GHz or to a resonance at about 500 GHz associated with the junction structure. Lines in the junction voltage-current characteristic were observed which demonstrated that, at certain values of junction bias, power at the rf--or its harmonics--was converted to power at the resonance frequency. An explanation of the experiment is given together with the necessary background, which provides the basis for a discussion of such operational considerations as upper frequency limit, sensitivity, temperature of operation, and saturation behavior at high signal levels. (Author)
A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.
A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>
Unexpected partly dramatic temperature dependences were registered for the basic tunnel parameters used to characterize a Josephson junction. Measurements of the magnetic field variation of the microwave-power reflection, i.e., a mapping of the Josephson plasma resonance, enabled determinations of the rf small-voltage resistance RJ, the cosφ amplitude ζ, and the effective junction capacitance C in both Pb-O-Pb and PbTl-O-Pb junctions. The uncertainties in the parameter values are large, particularly in the low temperature values of ζ, for which we confirm earlier estimates of ζ, but as the superconducting transition temperature Tc is approached, ζ increases rapidly and goes through a positive maximum close to +1 before it decreases towards zero at Tc. Also, RJ displays a pronounced maximum in the same temperature interval; it decreases rapidly within a narrow range below the temperature of the maximum before it again increases slowly well below Tc. The location in temperature for the two maxima depends upon the barrier via the critical current density, but seems to be material independent. Well below Tc, the ratios of RJ to the normal-state tunnel resistance are also affected by the barrier transmission. These latter properties seem hard to explain within a model based only on the relaxation of the order parameters in the superconductors. A considerable decrease in C close to Tc can be explained by temperature-dependent surface losses in the junction electrodes. The Q-value associated with these could be determined as a function of temperature. In accordance with previous measurements, the Josephson current IJ is reduced at low temperature in small high-resistance tunnel junctions. Smaller deviations in IJ from theoretical estimates can be explained by strong coupling effects.
Frequency locking effects in two interacting Josephson junctions are investigated. The junctions are described in the usual resistively-shunted-junction (RSJ) model and coupling between junctions is provided by a resonant circuit. The system can be used to simulate interactions between superconducting weak links in a resonant cavity or via a general impedance shunt. Various types of v-i curves in the voltage locking region are obtained in this calculation by using a first harmonic approximation in the high-frequency regime. Stability of order parameter phase oscillations for two identical junctions in the voltage-locked region is examined. We also show that dissimilar junctions can be synchronized in a resonant cavity using a common series bias current.