Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

HEMT-Based Readout Technique for Dark- and Photon-Count Studies in NbN Superconducting Single-Photon Detectors

J. Kitaygorsky, Sander N. Dorenbos, Elisabeth Reiger, Raymond N. Schouten, Val Zwiller, Roman Sobolewski

Published Jun 1, 2009• 22 citations
Publisher

Abstract

Dark counts in superconducting single-photon detectors (SSPDs) manifest themselves as spontaneous, transient voltage pulses, typically indistinguishable from photon counts. We present here a new readout technique based on integrating the SSPD with a low-noise, cryogenic high-electron-mobility transistor (HEMT) with high-input impedance. This arrangement allowed us to achieve amplitude resolution of the recorded output transients. In two-dimensional superconducting nanostripes, the physics of photon counting is based on the hotspot formation mechanism, while the dark counts correspond to voltage transients triggered by the vortex-antivortex motion and/or phase-slip centers. Thus, their respective transients can be distinguished by comparing the output pulse amplitude distributions. Our scheme also allowed us to perform photon-energy-resolution studies by comparing the SSPD output pulse amplitude distributions (the mean pulse amplitude and the distribution width) collected for incident single photons with different energies.

DOI
10.1109/tasc.2009.2018191

Related papers

Photon and dark counts in NbN superconducting single-photon detectors and nanostripes

J. Kitaygorsky, Sobolewski, Roman

Nanostructured NbN superconducting single-photon detectors (SSPDs) are fast and reliable photon counters that have become a highly desired technology in recent years. SSPDs feature counting rates up to 250 MHz in the wavelength range from UV to mid-IR, along with very low dark count rates, low timing jitter, and high detection efficiencies. Nanosecond and sub-nanosecond spontaneous transient voltage pulses, or dark counts, are studied in SSPDs along with NbN nanostripes of various dimensions. Dark counts, along with quantum efficiency (QE), determine the ultimate SSPD sensitivity. In experiments, the detector was completely isolated from the outside world by a metallic shield, and kept at temperatures below the superconducting critical temperature. Dark counts are associated with the formation of phase-slip centers, and dissociation of vortex-antivortex pairs, due to thermal fluctuations. Both temperature and current dependences are studied extensively. Additionally, resistive transitions of different samples are investigated, as well as their transport properties. Investigation of the photodetection mechanism, which requires understanding of hotspot dynamics, is presented. This was accomplished by measuring the QE dependence on temperature; it was found that QE increases monotonically with decreasing temperature. Additionally, two different read-out schemes are presented: the first is the standard scheme, where SSPDs act as photon counters, and dark counts are indistinguishable from photon counts. The second scheme is based on integrating the SSPD with a low-noise cryogenic HEMT amplifier with high-input impedance, which allows us to achieve amplitude resolution of the recorded output transients. The new read-out technique should enable photon-number resolving capability of standard devices, and possibly even energy-resolving capability, while also allowing us to study further the physics of dark counts and the photoresponse mechanism.

•Jan 1, 2008•4 citations

Dark Counts in Nanostructured NbN Superconducting Single-Photon Detectors and Bridges

J. Kitaygorsky, I. Komissarov, Artūras Jukna +10 more

We present our studies on dark counts, observed as transient voltage pulses, in current-biased NbN superconducting single-photon detectors (SSPDs), as well as in ultrathin (~4 nm), submicrometer-width (100 to 500 nm) NbN nanobridges. The duration of these spontaneous voltage pulses varied from 250 ps to 5 ns, depending on the device geometry, with the longest pulses observed in the large kinetic-inductance SSPD structures. Dark counts were measured while the devices were completely isolated (shielded by a metallic enclosure) from the outside world, in a temperature range between 1.5 and 6 K. Evidence shows that in our two-dimensional structures the dark counts are due to the depairing of vortex-antivortex pairs caused by the applied bias current. Our results shed some light on the vortex dynamics in 2D superconductors and, from the applied point of view, on intrinsic performance of nanostructured SSPDs.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•62 citations

Time-resolved characterization of NbN superconducting single-photon optical detectors

J. Zhang

NbN superconducting single-photon detectors (SSPDs) are very promising devices for their picosecond response time, high intrinsic quantum efficiency, and high signal-to-noise ratio within the radiation wavelength from ultraviolet to near infrared (0.4 gm to 3 gm) [1-3]. The single photon counting property of NbN SSPDs have been investigated thoroughly and a model of hotspot formation has been introduced to explain the physics of the photon- counting mechanism [4-6]. At high incident flux density (many-photon pulses), there are, of course, a large number of hotspots simultaneously formed in the superconducting stripe. If these hotspots overlap with each other across the width w of the stripe, a resistive barrier is formed instantly and a voltage signal can be generated. We assume here that the stripe thickness d is less than the electron diffusion length, so the hotspot region can be considered uniform. On the other hand, when the photon flux is so low that on average only one hotspot is formed across w at a given time, the formation of the resistive barrier will be realized only when the supercurrent at sidewalks surpasses the critical current (jr) of the superconducting stripe [1]. In the latter situation, the formation of the resistive barrier is associated with the phase-slip center (PSC) development. The effect of PSCs on the suppression of superconductivity in nanowires has been discussed very recently [8, 9] and is the subject of great interest.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•0 citations

Superconducting single-photon detectors as smart sensors

Wojciech Słysz, M. Guziewicz, Renata Kruszka +4 more

We present a new type of a quantum detector, namely, the superconducting single-photon detector (SSPD), and demonstrate that it can be implemented in various single-photon counting applications, ranging from the visible light to near-infrared telecommunication wavelengths. We describe the physics of the photoresponse of a superconducting nanostripe to a flux of single optical photons and present the operation principle of SSPDs, stressing that, currently, they significantly outperform any competing, research or commercial devices in terms of their quantum efficiency, counting rate, jitter, and unwanted dark counts. SSPDs integrated with a cryogenic HEMT read-out circuit can provide some level of both the energy and number resolution of an unknown incident photon flux, making them uniquely suitable for various photon sensing applications.

Superconductivity and Particle Accelerators•May 14, 2019•0 citations

Readout Electronics Using Single-Flux-Quantum Circuit Technology for Superconducting Single-Photon Detector Array

Hirotaka Terai, Shigehito Miki, Zhen Wang

Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•63 citations

Spectroscopy With Nanostructured Superconducting Single Photon Detectors

Elisabeth Reiger, Dong Pan, Wojtek Slysz +10 more

Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.

IEEE Journal of Selected Topics in Quantum Electronics•Jul 1, 2007•31 citations
Dark counts in superconducting single-photon detectors (SSPDs) manifest themselves as spontaneous, transient voltage pulses, typically indistinguishable from photon counts. We present here a new readout technique based on integrating the SSPD with a low-noise, cryogenic high-electron-mobility transistor (HEMT) with high-input impedance. This arrangement allowed us to achieve amplitude resolution of the recorded output transients. In two-dimensional superconducting nanostripes, the physics of photon counting is based on the hotspot formation mechanism, while the dark counts correspond to voltage transients triggered by the vortex-antivortex motion and/or phase-slip centers. Thus, their respective transients can be distinguished by comparing the output pulse amplitude distributions. Our scheme also allowed us to perform photon-energy-resolution studies by comparing the SSPD output pulse amplitude distributions (the mean pulse amplitude and the distribution width) collected for incident single photons with different energies.
Nanostructured NbN superconducting single-photon detectors (SSPDs) are fast and reliable photon counters that have become a highly desired technology in recent years. SSPDs feature counting rates up to 250 MHz in the wavelength range from UV to mid-IR, along with very low dark count rates, low timing jitter, and high detection efficiencies. Nanosecond and sub-nanosecond spontaneous transient voltage pulses, or dark counts, are studied in SSPDs along with NbN nanostripes of various dimensions. Dark counts, along with quantum efficiency (QE), determine the ultimate SSPD sensitivity. In experiments, the detector was completely isolated from the outside world by a metallic shield, and kept at temperatures below the superconducting critical temperature. Dark counts are associated with the formation of phase-slip centers, and dissociation of vortex-antivortex pairs, due to thermal fluctuations. Both temperature and current dependences are studied extensively. Additionally, resistive transitions of different samples are investigated, as well as their transport properties. Investigation of the photodetection mechanism, which requires understanding of hotspot dynamics, is presented. This was accomplished by measuring the QE dependence on temperature; it was found that QE increases monotonically with decreasing temperature. Additionally, two different read-out schemes are presented: the first is the standard scheme, where SSPDs act as photon counters, and dark counts are indistinguishable from photon counts. The second scheme is based on integrating the SSPD with a low-noise cryogenic HEMT amplifier with high-input impedance, which allows us to achieve amplitude resolution of the recorded output transients. The new read-out technique should enable photon-number resolving capability of standard devices, and possibly even energy-resolving capability, while also allowing us to study further the physics of dark counts and the photoresponse mechanism.
We present our studies on dark counts, observed as transient voltage pulses, in current-biased NbN superconducting single-photon detectors (SSPDs), as well as in ultrathin (~4 nm), submicrometer-width (100 to 500 nm) NbN nanobridges. The duration of these spontaneous voltage pulses varied from 250 ps to 5 ns, depending on the device geometry, with the longest pulses observed in the large kinetic-inductance SSPD structures. Dark counts were measured while the devices were completely isolated (shielded by a metallic enclosure) from the outside world, in a temperature range between 1.5 and 6 K. Evidence shows that in our two-dimensional structures the dark counts are due to the depairing of vortex-antivortex pairs caused by the applied bias current. Our results shed some light on the vortex dynamics in 2D superconductors and, from the applied point of view, on intrinsic performance of nanostructured SSPDs.
NbN superconducting single-photon detectors (SSPDs) are very promising devices for their picosecond response time, high intrinsic quantum efficiency, and high signal-to-noise ratio within the radiation wavelength from ultraviolet to near infrared (0.4 gm to 3 gm) [1-3]. The single photon counting property of NbN SSPDs have been investigated thoroughly and a model of hotspot formation has been introduced to explain the physics of the photon- counting mechanism [4-6]. At high incident flux density (many-photon pulses), there are, of course, a large number of hotspots simultaneously formed in the superconducting stripe. If these hotspots overlap with each other across the width w of the stripe, a resistive barrier is formed instantly and a voltage signal can be generated. We assume here that the stripe thickness d is less than the electron diffusion length, so the hotspot region can be considered uniform. On the other hand, when the photon flux is so low that on average only one hotspot is formed across w at a given time, the formation of the resistive barrier will be realized only when the supercurrent at sidewalks surpasses the critical current (jr) of the superconducting stripe [1]. In the latter situation, the formation of the resistive barrier is associated with the phase-slip center (PSC) development. The effect of PSCs on the suppression of superconductivity in nanowires has been discussed very recently [8, 9] and is the subject of great interest.
We present a new type of a quantum detector, namely, the superconducting single-photon detector (SSPD), and demonstrate that it can be implemented in various single-photon counting applications, ranging from the visible light to near-infrared telecommunication wavelengths. We describe the physics of the photoresponse of a superconducting nanostripe to a flux of single optical photons and present the operation principle of SSPDs, stressing that, currently, they significantly outperform any competing, research or commercial devices in terms of their quantum efficiency, counting rate, jitter, and unwanted dark counts. SSPDs integrated with a cryogenic HEMT read-out circuit can provide some level of both the energy and number resolution of an unknown incident photon flux, making them uniquely suitable for various photon sensing applications.
Superconducting single-photon detectors (SSPDs) based on NbN nanowires possess properties such as high counting rate, low dark count rate and small timing jitter, which are promising characteristics for a quantum key distribution system. An SSPD array has recently attracted attention, because it can provide a higher counting rate, and spatial and photon-number resolutions. We propose readout electronics using single-flux-quantum (SFQ) circuits to process a large number of output signals from an SSPD array. We designed and tested an interface circuit between an SSPD and SFQ circuit, and successfully observed SFQ pulse generation for an input pulse with a current amplitude of 17.4 ~ 36.4 muA , which is comparable with an output current amplitude of the SSPD. The interface circuit was also operational for an input pulse duration of 1.6 ns, which is shorter than the typical recovery time of the SSPD.
Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.