We present a new type of a quantum detector, namely, the superconducting single-photon detector (SSPD), and demonstrate that it can be implemented in various single-photon counting applications, ranging from the visible light to near-infrared telecommunication wavelengths. We describe the physics of the photoresponse of a superconducting nanostripe to a flux of single optical photons and present the operation principle of SSPDs, stressing that, currently, they significantly outperform any competing, research or commercial devices in terms of their quantum efficiency, counting rate, jitter, and unwanted dark counts. SSPDs integrated with a cryogenic HEMT read-out circuit can provide some level of both the energy and number resolution of an unknown incident photon flux, making them uniquely suitable for various photon sensing applications.
We present a new type of a quantum detector, namely, the superconducting single-photon detector (SSPD), and demonstrate that it can be implemented in various single-photon counting applications, ranging from the visible light to near-infrared telecommunication wavelengths. We describe the physics of the photoresponse of a superconducting nanostripe to a flux of single optical photons and present the operation principle of SSPDs, stressing that, currently, they significantly outperform any competing, research or commercial devices in terms of their quantum efficiency, counting rate, jitter, and unwanted dark counts. SSPDs integrated with a cryogenic HEMT read-out circuit can provide some level of both the energy and number resolution of an unknown incident photon flux, making them uniquely suitable for various photon sensing applications.
Superconducting single-photon detectors (SSPDs) are nanostructured devices made from ultrathin superconducting films. They are typically operated at liquid helium temperature and exhibit high detection efficiency, in combination with very low dark counts, fast response time, and extremely low timing jitter, within a broad wavelength range from ultraviolet to mid-infrared (up to 6mum). SSPDs are very attractive for applications such as fiber-based telecommunication, where single-photon sensitivity and high photon-counting rates are required. We review the current state-of-the-art in the SSPD research and development, and compare the SSPD performance to the best semiconducting avalanche photodiodes and other superconducting photon detectors. Furthermore, we demonstrate that SSPDs can also be successfully implemented in photon-energy-resolving experiments. Our approach is based on the fact that the size of the hotspot, a nonsuperconducting region generated upon photon absorption, is linearly dependent on the photon energy. We introduce a statistical method, where, by measuring the SSPD system detection efficiency at different bias currents, we are able to resolve the wavelength of the incident photons with a resolution of 50 nm.
Superconducting single photons detectors (SSPDs) have emerged in recent years as a promising alternative for
fast and sensitive infrared detectors working in the photon counting mode. In particular, those detectors combine
very low dark count rates (below 1 Hz), high speed (above 1 GHz), photon number resolution and reasonable
quantum efficiency (10% at telecom wavelengths). They already found applications in quantum cryptography
systems and integrated circuit failure analysis, but could also be used as ultimate sensors in matrix configurations.
We show here the optimization of SSPD fabrication and their optical metrology at CEA. SSPD are fabricated
by patterning a 80 nm wide nanowire in a very thin (4 nm) NbN film on sapphire, forming a pixel of several
microns size. A cryogenic all-fibered optoelectronic system has been developed and allows precise metrology of
the optical performances of SSPD. When biasing near the critical current of the nanowire, we demonstrate a
detection quantum efficiency of 8% at 1.55 µm, which is also found to be strongly polarization dependent. This
quantum efficiency being limited by optical absorption, we propose a prism coupling based absorption enhancing
structure that allows reaching 100% quantum efficiency.
The chapter reviews the main aspects of the physics of operation and performance of superconducting single-photon detectors (SSPDs) based on, mostly NbN, nanostripe meander-type structures and operated well below the superconductor transition temperature.We present theoreticalmodels developed to describe the photoresponse of superconducting nanostripes, as well as discuss mechanisms of SSPD generation of both photon-detection signals and dark counts. We also outline a standard SSPD fabrication process and discuss basic experimental techniques of SSPD characterization, focusing on the demonstration of its single-photon sensitivity and detection efficiency, as well as on measurements of the timing jitter. Finally, we give an outlook of future research directions and a quick overview of the vast area of SSPD applications.
We present a new class of single-photon devices for counting of both visible and infrared photons. Our superconducting single-photon detectors (SSPDs) are characterized by the intrinsic quantum efficiency (QE) reaching up to 100%, above 10 GHz counting rate, and negligible dark counts. The detection mechanism is based on the photon-induced hotspot formation and subsequent appearance of a transient resistive barrier across an ultrathin and submicron-wide superconducting stripe. The devices are fabricated from 3.5-nm-thick NbN films and operate at 4.2 K, well below the NbN superconducting transition temperature. Various continuous and pulsed laser sources in the wavelength range from 0.4 μm up to >3 μm were implemented in our experiments, enabling us to determine the detector QE in the photon-counting mode, response time, and jitter. For our best 3.5-nm-thick, 10×10 μm2-area devices, QE was found to reach almost 100% for any wavelength shorter than about 800 nm. For longer-wavelength (infrared) radiation, QE decreased exponentially with the photon wavelength increase. Time-resolved measurements of our SSPDs showed that the system-limited detector response pulse width was below 150 ps. The system jitter was measured to be 35 ps. In terms of the counting rate, jitter, and dark counts, the NbN SSPDs significantly outperform their semiconductor counterparts. Already identifeid and implemented applications of our devices range from noninvasive testing of semiconductor VLSI circuits to free-space quantum communications and quantum cryptography.
We have developed a new class of superconducting single-photon detectors (SSPDs) for ultrafast counting of infrared (IR) photons for secure quantum communications. The devices are operated on the quantum detection mechanism, based on the photon-induced hotspot formation and subsequent appearance of a transient resistive barrier across an ultrathin and submicron-wide superconducting stripe. The detectors are fabricated from 3.5-nm-thick NbN films and they operate at 4.2 K inside a closed-cycle refrigerator or liquid helium cryostat. Various continuous and pulsed laser sources have been used in our experiments, enabling us to determine the detector experimental quantum efficiency (QE) in the photon-counting mode, response time, time jitter, and dark counts. Our 3.5-nm-thick SSPDs reached QE above 15% for visible light photons and 5% at 1.3 - 1.5 μm infrared range. The measured real-time counting rate was above 2 GHz and was limited by the read-out electronics (intrinsic response time is <30 ps). The measured jitter was <18 ps, and the dark counting rate was <0.01 per second. The measured noise equivalent power (NEP) is 2 x 10-18 W/Hz1/2 at λ = 1.3 μm. In near-infrared range, in terms of the counting rate, jitter, dark counts, and overall sensitivity, the NbN SSPDs significantly outperform their semiconductor counterparts. An ultrafast quantum cryptography communication technology based on SSPDs is proposed and discussed.
Superconducting detectors capable of registering single light quanta - single photons - are highly sought after in a host of emerging 21st century technologies [1]. Superconducting nanowire single-photon detectors (SNSPDs or SSPDs) [2] operating in the telecommunication wavelength range outperform conventional semiconductor detectors in the following metrics: dark count rate, system detection efficiency (SDE), photon counting rate and timing jitter [3, 4, 5, 6]. SNSPDs have been deployed in many important emerging photon-counting applications including single photon LiDAR [7, 8], quantum key distribution [9, 10], optical quantum computing [11], life sciences [12, 13], fibre sensing [14, 15], exoplanet spectroscopy [16] and free space optical communication [17].