Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Stabilization and control in a linear ion trap

J.-P. Stacey

Published Jan 1, 2003• 6 citations
Publisher

Abstract

This thesis describes experimental work towards developing a trapped ion quantum information processor. An existing ion trap apparatus was capable of trapping and laser-cooling single ions or small ion strings of 40 Ca+, and had been used for studies of quantum jumps and natural lifetime measurements in Ca. This thesis describes improvements in this apparatus, which have allowed the stability and the flexibility of experimental control of the ions to be greatly increased. This enabled experiments to read out the spin state of a single trapped ion, and to load ions with isotope selectivity through photoionization. The optical systems were improved by installation of new lasers, optical reference cavities, and a system of acousto-optic modulators for laser intensity switching and frequency control. The photon counting for fluorescence detection was improved, and a new photon time-of-arrival correlation circuit developed. This has permitted rapid and more sensitive detection of micromotion, and hence cancellation of stray fields in the trap. A study of resonant circuits in the low RF, high voltage (10 MHz, 1 kV) regime was carried out with a view to developing a new RF supply for the Paul trap with reduced noise and increased power. A new supply based on a helical resonator was built and used to trap ions. This technique has reduced noise and will permit higher secular frequencies to be attained in the future. A magnetic field B in the ion trap is used to define a quantization axis, and in one series of experiments was required to be of order 100 G to provide a substantial Zeeman splitting. A set of magnetic field coils to control the size and direction of B is described. The design of these posed some problems owing to an unforseen issue with the vacuum chamber. In short, it is magnetizable and acts to first approximation like a magnetic shield. The field coils had to be sufficiently substantial to produce the desired field at the ion even in the presence of this shielding effect, and dark resonance (and other) spectra with Zeeman splitting were obtained to calibrate the field using the ion as a probe. Finally, the thesis describes the successful loading of the ion trap by laser photoionization from a weak atomic beam. This involved two new lasers at 423 nm and 389 nm. Saturated absorption spectroscopy of neutral calcium is first described, then transverse excitation of an atomic beam in our vacuum chamber is used to identify all the main isotopes of calcium and confirm their abundances in our source (a heated sample of natural calcium). Finally, photoionization is used to load the trap. This has three advantages over electron-impact ionization. By avoiding an electron gun, we avoid charging of insulating patches and subsequent electric field drift as they discharge; the flux in the atomic beam and hence calcium (and other) deposits on the electrodes can be greatly reduced; and most importantly, the photoionization is isotope selective. Evidence is presented which suggests that even with an non-enriched source, the rare isotope 43 Ca can be loaded with reasonable efficiency. This isotope is advantageous for quantum information experiments for several reasons, but chiefly because its ground state hyperfine structure can act as a stable qubit.

DOI
10.5287/ora-kodvamevv

Related papers

Experimental techniques for cold chemistry and molecular spectroscopy in an ion trap

Kevin Sheridan

A range of experimental techniques for application in reaction studies between ionic and neutral atoms/molecules and high resolution spectroscopy experiments with sympathetically cooled molecular ions are presented. A novel ion trap loading scheme using the photo-ionisation of atoms generated by the pulsed laser ablation of a solid calcium target has been characterised. We have identified the range of ablation laser fluences that must be used in order to produce a flux of neutral calcium atoms, which is a prerequisite for isotope selective ion trap loading. Calcium ions are trapped and laser cooled in a linear radio-frequency ion trap. We have developed a spectroscopy scheme that allows the entire fluorescence spectrum of trapped ions to be rapidly collected with high precision while maintaining a low ion temperature and good ion localisation throughout interrogation. The scheme has been demonstrated by measuring the saturation intensity of the calcium ion 4S1/2?4P1/2 transition. We have developed a novel scheme to measure the secular motion of trapped ions and demonstrated the application of the technique to ion-neutral collision reaction experiments. Employing pulsed excitation and Doppler velocimetry, we have measured the centre-of-mass mode frequency of single ions as well as large ion crystals with a frequency precision better than 2x10-3 within an interrogation time on the order of seconds. This method has been used to measure the mass of ions and observe charge exchange collisions between trapped calcium isotopes. In particular, we have measured the 44Ca++40Ca!40Ca++44Ca reaction cross section and demonstrated the single-event resolution of the technique. Finally, we have developed a novel all-optical broadband scheme for exciting, amplifying and measuring the secular motion of ions in the trap. Oscillation induced by optical excitation has been coherently amplified to control and measure the ion's secular motion. Requiring only a single interrogation laser, the ion's oscillation amplitude can be precisely controlled. The application of this technique to non-destructive spectroscopy of trapped molecular ions is discussed.

•Oct 3, 2013•0 citations

Technological Improvements for Linear Ion Trap Experiments

Brendin Chow

Laser-cooled, trapped ions are a highly controlled experimental system that allows one to engineer novel quantum states of both fundamental and practical interest.For a string of ions in a linear radio frequency (RF) Paul trap, the linear-zigzag structural phase transition is an intriguing system to investigate quantum dynamics near the critical point of a prototype second-order phase transition, including the preparation of superposition states of different structural configurations.This thesis focuses on two technological improvements required for studying the linear-zigzag structural phase transition in the quantum regime.The first is the development of a compact and cost-effective RF synthesizer setup to provide multiple modulation sources for the laser manipulation of ion strings.The functionality and limitations of a prototype design, based on Direct Digital Synthesizer (DDS) development boards with a microcontroller interface, are evaluated and future improvements are identified.The second part of this thesis focuses on the stabilization of the secular trap frequencies in a linear Paul trap, which is necessary to obtain a stable critical point for the studies of the linear-zigzag transition.To this end, this thesis presents the implementation of a Ramsey spectroscopic technique to measure the secular frequencies and presents the preliminary results from the stability tests.

•May 26, 2017•0 citations

Barium ion cavity qed and triply ionized thorium ion trapping

Adam V. Steele

Trapped cold ions are tools which we used to approach two very disparate areas of physics, strong coupling between Ba+ ions and optical resonators, and investigations of a low-energy nuclear isomer of 229-Th. The first part of this thesis describes our progress towards the integration of a miniature Paul (rf) ion trap with a high finesse (F=30000) optical cavity. Ba+ ions were trapped and cooled for long periods and a new scheme for isotope selective photoionization was developed. The second part of this thesis describes our progress towards controlled excitation of the low energy nuclear isomer of 229-Th, which may provide a bridge between the techniques of cold atomic and nuclear physics. As a step towards this goal, 232-Th3+ ions were confined in rf ions traps and cooled via collisions with a buffer gas of helium. A sophisticated scanning program was developed for controlling ion trap loading, tuning lasers, and running a CCD camera to look for fluorescence. The low-lying electronic transitions of Th3+ at 984 nm, 690 nm and 1087 nm were observed via laser fluorescence.

•Nov 17, 2008•7 citations

Resolved Sideband Spectroscopy for the Detection of Weak Optical Transitions

James E. Goeders

This thesis reports on the setup of a new ion trap apparatus designed for experiments with single ⁴⁰Ca⁺ ions to perform molecular spectroscopy. The calcium ion is laser cooled, allowing for sympathetic cooling of the nonfluorescing molecular ion. The aim of these experiments is to explore loading and identifying molecular ions in RF-Paul traps, as well as developing new spectroscopic tools to measure transitions of molecular ions via the fluorescence of co-trapped ⁴⁰Ca⁺ ions. Ground state cooling of a mixed ion pair is implemented as a first step towards increasing the sensitivity of our technique to the level necessary to measure transitions with low scattering rates (like those present in molecular ions). Doppler cooling on the S(1/2)->P(1/2) transition of the calcium ion results in the formation of a Coulomb crystal, the behavior of which may be used to infer properties of the molecular ion. Following cooling, sideband spectroscopy on the narrow S(1/2)->D(5/2) quadrupole transition of calcium may be used to identify the mass of single molecular ions. This method is verified via a non-destructive measurement on ⁴⁰CaH⁺ and ⁴⁰Ca¹⁶O⁺. The normal modes of the Coulomb crystal can also be used to extract information from the target ion to the control ion. By driving the blue side of a transition, laser induced heating can be put into the two ion system, which leads to changes in fluorescence of the ⁴⁰Ca⁺ ion, first demonstrated with two Ca⁺ isotopes. Increasing the sensitivity of this technique requires ground state cooling of both the ⁴⁰Ca⁺ ion and the ion of interest, enabling the transfer of the ion's motional state into the ground state with high probability. This thesis demonstrates ground state cooling of the atomic ion and sympathetic cooling of a second ion (⁴⁴Ca⁺). Once in the ground state, heating of the Coulomb crystal by scattering photons off of the spectroscopy ion can be measured by monitoring the resolved motional sidebands of the S(1/2)->D(5/2) transition of ⁴⁰Ca⁺, allowing for spectral lines to be inferred. Future experiments will investigate this technique with molecular ions.

•Jul 2, 2013•2 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•5 citations

Trapping triply ionized thorium isotopes

Layne Churchill

Cold trapped ions have many applications in quantum information science and precision metrology. In this thesis, we present progress toward two objectives involving ions confined to linear RF traps: the strong coupling of Ba+ ions with a high finesse optical cavity, and the observation of an optical nuclear transition in 229Th3+. In pursuit of the first objective, a novel high-temperture vapor cell for the spectroscopy of neutral barium was constructed. Using this vapor cell, a new technique for isotope-selective photoionization loading of Ba+ in an ion trap was developed. In pursuit of the second objective, techniques ultimately to be used in creating, trapping, and observing 229Th3+ are studied using 232Th3+. Ion traps are loaded with 232Th3+ via laser ablation of thorium targets. 232Th3+ is detected optically using laser-induced fluorescence and electronically using a channel electron multiplier. A technique for creating ablation targets from trace quantities of thorium nitrate is presented. The primary loss mechanisms of Th3+, charge exchange and chemical reactions, are studied.

•Aug 3, 2010•4 citations
This thesis describes experimental work towards developing a trapped ion quantum information processor. An existing ion trap apparatus was capable of trapping and laser-cooling single ions or small ion strings of 40 Ca+, and had been used for studies of quantum jumps and natural lifetime measurements in Ca. This thesis describes improvements in this apparatus, which have allowed the stability and the flexibility of experimental control of the ions to be greatly increased. This enabled experiments to read out the spin state of a single trapped ion, and to load ions with isotope selectivity through photoionization. The optical systems were improved by installation of new lasers, optical reference cavities, and a system of acousto-optic modulators for laser intensity switching and frequency control. The photon counting for fluorescence detection was improved, and a new photon time-of-arrival correlation circuit developed. This has permitted rapid and more sensitive detection of micromotion, and hence cancellation of stray fields in the trap. A study of resonant circuits in the low RF, high voltage (10 MHz, 1 kV) regime was carried out with a view to developing a new RF supply for the Paul trap with reduced noise and increased power. A new supply based on a helical resonator was built and used to trap ions. This technique has reduced noise and will permit higher secular frequencies to be attained in the future. A magnetic field B in the ion trap is used to define a quantization axis, and in one series of experiments was required to be of order 100 G to provide a substantial Zeeman splitting. A set of magnetic field coils to control the size and direction of B is described. The design of these posed some problems owing to an unforseen issue with the vacuum chamber. In short, it is magnetizable and acts to first approximation like a magnetic shield. The field coils had to be sufficiently substantial to produce the desired field at the ion even in the presence of this shielding effect, and dark resonance (and other) spectra with Zeeman splitting were obtained to calibrate the field using the ion as a probe. Finally, the thesis describes the successful loading of the ion trap by laser photoionization from a weak atomic beam. This involved two new lasers at 423 nm and 389 nm. Saturated absorption spectroscopy of neutral calcium is first described, then transverse excitation of an atomic beam in our vacuum chamber is used to identify all the main isotopes of calcium and confirm their abundances in our source (a heated sample of natural calcium). Finally, photoionization is used to load the trap. This has three advantages over electron-impact ionization. By avoiding an electron gun, we avoid charging of insulating patches and subsequent electric field drift as they discharge; the flux in the atomic beam and hence calcium (and other) deposits on the electrodes can be greatly reduced; and most importantly, the photoionization is isotope selective. Evidence is presented which suggests that even with an non-enriched source, the rare isotope 43 Ca can be loaded with reasonable efficiency. This isotope is advantageous for quantum information experiments for several reasons, but chiefly because its ground state hyperfine structure can act as a stable qubit.
A range of experimental techniques for application in reaction studies between ionic and neutral atoms/molecules and high resolution spectroscopy experiments with sympathetically cooled molecular ions are presented. A novel ion trap loading scheme using the photo-ionisation of atoms generated by the pulsed laser ablation of a solid calcium target has been characterised. We have identified the range of ablation laser fluences that must be used in order to produce a flux of neutral calcium atoms, which is a prerequisite for isotope selective ion trap loading. Calcium ions are trapped and laser cooled in a linear radio-frequency ion trap. We have developed a spectroscopy scheme that allows the entire fluorescence spectrum of trapped ions to be rapidly collected with high precision while maintaining a low ion temperature and good ion localisation throughout interrogation. The scheme has been demonstrated by measuring the saturation intensity of the calcium ion 4S1/2?4P1/2 transition. We have developed a novel scheme to measure the secular motion of trapped ions and demonstrated the application of the technique to ion-neutral collision reaction experiments. Employing pulsed excitation and Doppler velocimetry, we have measured the centre-of-mass mode frequency of single ions as well as large ion crystals with a frequency precision better than 2x10-3 within an interrogation time on the order of seconds. This method has been used to measure the mass of ions and observe charge exchange collisions between trapped calcium isotopes. In particular, we have measured the 44Ca++40Ca!40Ca++44Ca reaction cross section and demonstrated the single-event resolution of the technique. Finally, we have developed a novel all-optical broadband scheme for exciting, amplifying and measuring the secular motion of ions in the trap. Oscillation induced by optical excitation has been coherently amplified to control and measure the ion's secular motion. Requiring only a single interrogation laser, the ion's oscillation amplitude can be precisely controlled. The application of this technique to non-destructive spectroscopy of trapped molecular ions is discussed.
Laser-cooled, trapped ions are a highly controlled experimental system that allows one to engineer novel quantum states of both fundamental and practical interest.For a string of ions in a linear radio frequency (RF) Paul trap, the linear-zigzag structural phase transition is an intriguing system to investigate quantum dynamics near the critical point of a prototype second-order phase transition, including the preparation of superposition states of different structural configurations.This thesis focuses on two technological improvements required for studying the linear-zigzag structural phase transition in the quantum regime.The first is the development of a compact and cost-effective RF synthesizer setup to provide multiple modulation sources for the laser manipulation of ion strings.The functionality and limitations of a prototype design, based on Direct Digital Synthesizer (DDS) development boards with a microcontroller interface, are evaluated and future improvements are identified.The second part of this thesis focuses on the stabilization of the secular trap frequencies in a linear Paul trap, which is necessary to obtain a stable critical point for the studies of the linear-zigzag transition.To this end, this thesis presents the implementation of a Ramsey spectroscopic technique to measure the secular frequencies and presents the preliminary results from the stability tests.
Trapped cold ions are tools which we used to approach two very disparate areas of physics, strong coupling between Ba+ ions and optical resonators, and investigations of a low-energy nuclear isomer of 229-Th. The first part of this thesis describes our progress towards the integration of a miniature Paul (rf) ion trap with a high finesse (F=30000) optical cavity. Ba+ ions were trapped and cooled for long periods and a new scheme for isotope selective photoionization was developed. The second part of this thesis describes our progress towards controlled excitation of the low energy nuclear isomer of 229-Th, which may provide a bridge between the techniques of cold atomic and nuclear physics. As a step towards this goal, 232-Th3+ ions were confined in rf ions traps and cooled via collisions with a buffer gas of helium. A sophisticated scanning program was developed for controlling ion trap loading, tuning lasers, and running a CCD camera to look for fluorescence. The low-lying electronic transitions of Th3+ at 984 nm, 690 nm and 1087 nm were observed via laser fluorescence.
This thesis reports on the setup of a new ion trap apparatus designed for experiments with single ⁴⁰Ca⁺ ions to perform molecular spectroscopy. The calcium ion is laser cooled, allowing for sympathetic cooling of the nonfluorescing molecular ion. The aim of these experiments is to explore loading and identifying molecular ions in RF-Paul traps, as well as developing new spectroscopic tools to measure transitions of molecular ions via the fluorescence of co-trapped ⁴⁰Ca⁺ ions. Ground state cooling of a mixed ion pair is implemented as a first step towards increasing the sensitivity of our technique to the level necessary to measure transitions with low scattering rates (like those present in molecular ions). Doppler cooling on the S(1/2)->P(1/2) transition of the calcium ion results in the formation of a Coulomb crystal, the behavior of which may be used to infer properties of the molecular ion. Following cooling, sideband spectroscopy on the narrow S(1/2)->D(5/2) quadrupole transition of calcium may be used to identify the mass of single molecular ions. This method is verified via a non-destructive measurement on ⁴⁰CaH⁺ and ⁴⁰Ca¹⁶O⁺. The normal modes of the Coulomb crystal can also be used to extract information from the target ion to the control ion. By driving the blue side of a transition, laser induced heating can be put into the two ion system, which leads to changes in fluorescence of the ⁴⁰Ca⁺ ion, first demonstrated with two Ca⁺ isotopes. Increasing the sensitivity of this technique requires ground state cooling of both the ⁴⁰Ca⁺ ion and the ion of interest, enabling the transfer of the ion's motional state into the ground state with high probability. This thesis demonstrates ground state cooling of the atomic ion and sympathetic cooling of a second ion (⁴⁴Ca⁺). Once in the ground state, heating of the Coulomb crystal by scattering photons off of the spectroscopy ion can be measured by monitoring the resolved motional sidebands of the S(1/2)->D(5/2) transition of ⁴⁰Ca⁺, allowing for spectral lines to be inferred. Future experiments will investigate this technique with molecular ions.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
Cold trapped ions have many applications in quantum information science and precision metrology. In this thesis, we present progress toward two objectives involving ions confined to linear RF traps: the strong coupling of Ba+ ions with a high finesse optical cavity, and the observation of an optical nuclear transition in 229Th3+. In pursuit of the first objective, a novel high-temperture vapor cell for the spectroscopy of neutral barium was constructed. Using this vapor cell, a new technique for isotope-selective photoionization loading of Ba+ in an ion trap was developed. In pursuit of the second objective, techniques ultimately to be used in creating, trapping, and observing 229Th3+ are studied using 232Th3+. Ion traps are loaded with 232Th3+ via laser ablation of thorium targets. 232Th3+ is detected optically using laser-induced fluorescence and electronically using a channel electron multiplier. A technique for creating ablation targets from trace quantities of thorium nitrate is presented. The primary loss mechanisms of Th3+, charge exchange and chemical reactions, are studied.