Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Fast Josephson Arrays for Voltage and Impedance Metrology

Juha Hassel, Leif Grönberg, P. Helistö, Heikki Seppä, J. Nissilä, A. Kemppinen

Published Jun 1, 2004• 4 citations
Publisher

Abstract

We introduce an optimized Josephson double array generating two independent voltages up to 1.5V using only one microwave input. Such an array, combined with the quantum Hall resistance, can provide the basic traceability for an electricity metrology laboratory from DC voltage to capacitance. We describe the array and present preliminary experimental results from DC measurements. Extending the output voltage up to 10V is discussed

DOI
10.1109/cpem.2004.305507

Related papers

Methods for electrical quantities metrology in cryogenic environments

Paolo Panetta

Quantum electrical metrology relies extensively on cryogenic phenomena, most notably the Josephson and quantum Hall effects, which provide the foundations of modern voltage and resistance standards. At the same time, the rapid development of superconducting electronics and cryogenic quantum technologies has increased the demand for accurate and traceable electrical measurements performed directly at cryogenic temperatures. Limited cooling power, self-heating, imperfect thermalization, parasitic impedances, and long measurement lines make the characterization and uncertainty assessment of such measurements particularly challenging. This thesis addresses two complementary aspects of electrical metrology in cryogenic environments: the traceable determination of microwave power at the device reference plane and the characterization of both a device exhibiting quantized current through dual Shapiro steps and its measurement setup.

•Oct 14, 2026•0 citations

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations

Applications in Quantum Metrology

J. Kohlmann, Alexander B Zorin

Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.

Applied Superconductivity•Jan 7, 2015•3 citations

Stimulated Power Generation in ES-SIS Junction Arrays

Juha Hassel, P. Helistö, Leif Grönberg +3 more

We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.

IEEE Transactions on Instrumentation and Measurement•Mar 21, 2005•8 citations

Development of 0.5-V Josephson junction array devices for quantum voltage standards*

Lanruo Wang, Jinjin Li, Wenhui Cao +2 more

The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology (NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/Nb x Si1−x /Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current (dc) quantum voltage of about 0.5 V with a ∼1-mA current margin of the 1st quantum voltage step is obtained. To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology (NIST) programmable Josephson voltage standard (PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.

Chinese Physics B•Jun 1, 2019•5 citations

DC voltage calibrator based on an array of high-temperature superconductor josephson junctions

Alexander M. Klushin, A.V. Komkov, V.D. Gelikonova +2 more

We have developed and investigated the main parts of a voltage calibrator with an output voltage up to 10 V. The calibrator is based on a quantum DC voltage which is generated by an array of high-temperature superconductor Josephson junctions. The described concept and the demonstrated parameters of the main parts of the instrument show, that a combined uncertainty of the output voltage of a few parts in 10/sup 8/ can be obtained.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 2003•7 citations
We introduce an optimized Josephson double array generating two independent voltages up to 1.5V using only one microwave input. Such an array, combined with the quantum Hall resistance, can provide the basic traceability for an electricity metrology laboratory from DC voltage to capacitance. We describe the array and present preliminary experimental results from DC measurements. Extending the output voltage up to 10V is discussed
Quantum electrical metrology relies extensively on cryogenic phenomena, most notably the Josephson and quantum Hall effects, which provide the foundations of modern voltage and resistance standards. At the same time, the rapid development of superconducting electronics and cryogenic quantum technologies has increased the demand for accurate and traceable electrical measurements performed directly at cryogenic temperatures. Limited cooling power, self-heating, imperfect thermalization, parasitic impedances, and long measurement lines make the characterization and uncertainty assessment of such measurements particularly challenging. This thesis addresses two complementary aspects of electrical metrology in cryogenic environments: the traceable determination of microwave power at the device reference plane and the characterization of both a device exhibiting quantized current through dual Shapiro steps and its measurement setup.
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.
Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.
We present experimental results on new programmable Josephson voltage standards based on frequency dependently damped superconductor-insulator-superconductor (SIS) junctions. We introduce a design able to generate two independent floating voltages up to 1.5 V using a microwave frequency of 70 GHz. The array is developed for dc and ac voltage and impedance metrology. The design is optimized in terms of speed, power consumption, and stability. Stimulated power generation is shown to affect the performance of long SIS arrays. The collective dynamics of Josephson junctions is analyzed and a boundary condition for the design of long arrays is derived.
The design, fabrication, and the characterization of a 0.5-V Josephson junction array device are presented for the quantum voltage standards in the National Institute of Metrology (NIM) of China. The device consists of four junction arrays, each of which has 1200 3-stacked Nb/Nb x Si1−x /Nb junctions and an on-chip superconducting microwave circuit which is mainly a power divider enabling each Josephson array being loaded with an equal amount of microwave power. A direct current (dc) quantum voltage of about 0.5 V with a ∼1-mA current margin of the 1st quantum voltage step is obtained. To further prove the quality of NIM device, a comparison between the NIM device with the National Institute of Standards and Technology (NIST) programmable Josephson voltage standard (PJVS) system device is conducted. The difference of the reproduced 0.5-V quantum voltage between the two devices is about 0.55 nV, which indicates good agreement between the two devices. With the homemade device, we have realized a precise and applicable 0.5-V applicable-level quantum voltage.