Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Superconductivity

Applications in Quantum Metrology

J. Kohlmann, Alexander B Zorin

Published Jan 7, 2015• 3 citations
Publisher

Abstract

Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.

DOI
10.1002/9783527670635.ch7

Related papers

Quantum Metrology

Editors: Richard E. Harris and Ju¨rgen Niemeyer

As thorough readers of this book have begun to discover by this chapter on metrology, the most widely used applications of superconducting electronics involve measurements of electromagnetic phenomena. Unlike most other phenomena used for measurements, superconductivity is also essential for electrical standards. Because it is a quantum phenomenon, it can represent voltage in terms of fundamental constants with an amazing precision of a few parts in 1019. In some regards superconducting voltage standards based on arrays of Josephson junctions are the most successful application of superconductivity, considering the numbers of junctions and their worldwide use. While they are conceptually simple, it has taken almost 50 years for their underlying technology to progress from unreliable single junctions to robust, complex, three-dimensional integrated circuits having more than 300,000 junctions and producing precision ac voltages up to 10 V. Here is their story.

CRC Press eBooks•Nov 11, 2011•0 citations

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations

Applications: Metrology

John C. Gallop, Ling Hao, Alain Rüfenacht

Metrology is the science of precision measurement of physical quantities and has developed a close relationship with superconductivity and superconducting materials, beginning with the discoveries of magnetic flux quantization and the Josephson effects in 1961 and 1962. Programmable Josephson voltage standard systems were first proposed and developed at NIST and are nowadays fully demonstrated in numerous metrology measurements and operated in liquid-cryogen-free refrigerators. A Josephson array device with growing applications to ac voltage metrology has emerged in recent years: the pulse-driven Josephson arbitrary waveform synthesizer. The use of superconductors in solenoids allows current densities to be much higher than for conventional conductors due to zero Joule heating. The Josephson effect has been applied to temperature measurement through the detection of Johnson noise using various superconducting junction-based technologies. The most recent application of Josephson technologies to temperature metrology involves the use of quantum-based reference noise-voltage waveforms synthesized by arrays of Josephson junctions.

CRC Press eBooks•May 17, 2022•0 citations

Josephson arrays for dc and ac metrology

J. Niemeyer

Large series arrays of underdamped SIS tunnel junctions are the basic element of the primary dc voltage standards used at present. The development of versatile quantum voltmeters for dc and ac metrology requires the preparation of large and perfect series arrays of overdamped Josephson junctions. Overdamped junctions can be realized by externally shunted SIS junctions or by internally shunted SNS or SINIS junctions. Arrays of up to 8000 SINIS junctions or 30000 SNS junctions were successfully operated at the 1 V dc level. In addition to being used in large arrays for voltage metrology and oscillators, the described junction types may become very useful for the preparation of highly integrated single-flux-quantum digital devices.

Superconductor Science and Technology•May 1, 2000•18 citations

Application of the Josephson effect to voltage metrology

Samuel P. Benz, C.A. Hamilton

The unique ability of a Josephson junction to control the flow of magnetic flux quanta leads to a perfect relationship between frequency and voltage. Over the last 30 years, metrology laboratories have used this effect to greatly improve the accuracy of dc voltage standards. More recent research is focused on combining the ideas of digital signal processing with quantum voltage pulses to achieve similar gains in ac voltage metrology. The integrated circuits that implement these ideas are the only complex superconducting electronic devices that have found wide commercial application.

Proceedings of the IEEE•Sep 20, 2004•104 citations
Famous applications of Josephson junctions have successfully been established in electrical metrology for high-precision measurements. The main important representative of a metrological application is the Josephson voltage standard initially used for dc measurements. Meanwhile, the developments are focused on Josephson voltage standards for ac applications. These quantum voltage standards for output voltages up to 10 V contain series arrays of 100,000 Josephson junctions or even more. This chapter describes the development and present status of modern Josephson voltage standards. The fundamental duality of the superconducting phase and the electric charge makes it possible to realize superconducting circuits, enabling the controlled motion of individual Cooper pairs. We review the status of these circuits, including either small Josephson junctions or superconducting nanowires, and their possible application to electrical metrology.
As thorough readers of this book have begun to discover by this chapter on metrology, the most widely used applications of superconducting electronics involve measurements of electromagnetic phenomena. Unlike most other phenomena used for measurements, superconductivity is also essential for electrical standards. Because it is a quantum phenomenon, it can represent voltage in terms of fundamental constants with an amazing precision of a few parts in 1019. In some regards superconducting voltage standards based on arrays of Josephson junctions are the most successful application of superconductivity, considering the numbers of junctions and their worldwide use. While they are conceptually simple, it has taken almost 50 years for their underlying technology to progress from unreliable single junctions to robust, complex, three-dimensional integrated circuits having more than 300,000 junctions and producing precision ac voltages up to 10 V. Here is their story.
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.
Metrology is the science of precision measurement of physical quantities and has developed a close relationship with superconductivity and superconducting materials, beginning with the discoveries of magnetic flux quantization and the Josephson effects in 1961 and 1962. Programmable Josephson voltage standard systems were first proposed and developed at NIST and are nowadays fully demonstrated in numerous metrology measurements and operated in liquid-cryogen-free refrigerators. A Josephson array device with growing applications to ac voltage metrology has emerged in recent years: the pulse-driven Josephson arbitrary waveform synthesizer. The use of superconductors in solenoids allows current densities to be much higher than for conventional conductors due to zero Joule heating. The Josephson effect has been applied to temperature measurement through the detection of Johnson noise using various superconducting junction-based technologies. The most recent application of Josephson technologies to temperature metrology involves the use of quantum-based reference noise-voltage waveforms synthesized by arrays of Josephson junctions.
Large series arrays of underdamped SIS tunnel junctions are the basic element of the primary dc voltage standards used at present. The development of versatile quantum voltmeters for dc and ac metrology requires the preparation of large and perfect series arrays of overdamped Josephson junctions. Overdamped junctions can be realized by externally shunted SIS junctions or by internally shunted SNS or SINIS junctions. Arrays of up to 8000 SINIS junctions or 30000 SNS junctions were successfully operated at the 1 V dc level. In addition to being used in large arrays for voltage metrology and oscillators, the described junction types may become very useful for the preparation of highly integrated single-flux-quantum digital devices.
The unique ability of a Josephson junction to control the flow of magnetic flux quanta leads to a perfect relationship between frequency and voltage. Over the last 30 years, metrology laboratories have used this effect to greatly improve the accuracy of dc voltage standards. More recent research is focused on combining the ideas of digital signal processing with quantum voltage pulses to achieve similar gains in ac voltage metrology. The integrated circuits that implement these ideas are the only complex superconducting electronic devices that have found wide commercial application.