Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

The atomic details of the interfacial interaction between the bottom electrode of Al/AlOx/Al Josephson junctions and HF-treated Si substrates

Lunjie J. Zeng, Philip Krantz, S. Nik, Per Delsing, Eva Olsson

Published Apr 28, 2015• 20 citations
Publisher

Abstract

The interface between the Al bottom contact layer and Si substrates in Al based Josephson junctions is believed to have a significant effect on the noise observed in Al based superconducting devices. We have studied the atomic structure of it by transmission electron microscopy. An amorphous layer with a thickness of ∼5 nm was found between the bottom Al electrode and HF-treated Si substrate. It results from intermixing between Al, Si, and O. We also studied the chemical bonding states among the different species using energy loss near edge structure. The observations are of importance for the understanding of the origin of decoherence mechanisms in qubits based on these junctions.

DOI
10.1063/1.4919224

Related papers

From Structure to Coherence: Comprehensive Electron Microscopy Analysis of Superconducting Quantum Devices

Thang Pham, Matthew Cheng, Dominic P. Goronzy +4 more

The development of quantum computers, capable of surpassing classical computing in solving specific complex problems, hinges on breakthroughs in materials science, precision device fabrication, and the optimization of quantum architectures [1]. Among the leading candidates for quantum computation, superconducting qubits, particularly those based on transmon designs, have shown promising advances with coherence times reaching hundreds of microseconds [2]. However, to fully unlock the potential of scalable quantum computing, further enhancements in coherence are necessary. The intricate structure-coherence relationship within these devices, especially at critical interfaces such as metal-air, metal-dielectric, and metal-substrate in Josephson junctions (JJs), poses a significant challenge due to the potential for two-level-system loss channels. Here, we detail our pioneering efforts to understand these structure-coherence relationships utilizing advanced electron microscopy techniques. Focusing on the Al-AlOx and Al-Si substrate interfaces in Josephson Junctions, we employ a combination of low-loss and core-loss electron energy loss spectroscopy (EELS) and four-dimensional scanning transmission electron microscopy (4D-STEM) conducted at room and ultra-low temperatures (sub-6 K). This approach allows for an unprecedented examination of the chemical composition, bonding environments, and nanoscale structures of key surfaces and interfaces critical to the quantum coherence. Figure 1 presents a typical superconducting architecture at the chip level; each superconducting qubit consists of a Josephson Junction in parallel with an ultra-low-loss capacitor to create a resonant structure in the 3-6GHz range. JJs are highlighted in the area boxed in Fig. 1A and can be observed in detail in Fig. 1B. Lamella cross-sections (as shown in Fig. 1C) were prepared using a dual-beam focused ion beam (FIB) FEI-SEM Helios Nanolab. The lift-off was performed using 30 kV Ga+ ions, and the final cleaning step was carried out at 2 kV to remove surface damage on the area of interest, resulting in a final sample thickness of 50-100 nm. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data were collected on a probe-corrected JEOL ARM200 S/TEM operating at 200 kV. The convergent angle for ADF-STEM imaging was 25 mrad. Electron energy loss spectra (EELS) were acquired at 200 kV using a Gatan GIF Quantum on a K2 pixelated detector. Data processing (background subtraction, plural scattering removal, and signal mapping) was conducted using Gatan GMS software. Four-dimensional STEM (4D-STEM) data were collected by a K3 and STELA cameras. The convergent angles were 0.5-1.5 mrad, and the camera length was 6-10 cm. The step size was 5-10 Å. Merging microscopic insights with electrical data and theoretical frameworks, we aim to reveal how atomic-scale irregularities affect coherence times. Our results highlight key decoherence mechanisms in superconducting qubits and suggest specific improvements for qubit design and manufacturing. By linking electron microscopy findings to device performance, we outline strategies to reduce decoherence, essential for achieving reliable quantum computing. This work bridges materials science and quantum engineering, driving efforts in making scalable quantum computers forward [3]. A) Microscopic view of a superconducting transmon qubit, highlighting its symmetric design with central island and capacitor pads. B) SEM image of a JJ displaying their Al top and bottom contacts. C) STEM image of a JJ showing its key components and interfaces: Al top and bottom contact, AlOx tunnel barrier, Si substrate and Al-Si interface. A) EELS chemical maps of two interfaces, Al/Al and Al/Si using K-edges of oxygen, aluminum and silicon of a Josephson junction. It is possible to detect a formation of oxides at both interfaces. Plots showing Al and Si K-edge at 1560 eV and 1839 eV, respectively, and the ELNES are shown on the right side (Scale bar in A – 20 nm). B) Analysis of the disordered Al phases at the interfaces utilizing ePDF.

Microscopy and Microanalysis•Jul 1, 2024•0 citations

Atomic structure and oxygen deficiency of the ultrathin aluminium oxide barrier in Al/AlOx/Al Josephson junctions

Lunjie J. Zeng, Trung Dung Tran, Cheuk‐Wai Tai +2 more

Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.

Scientific Reports•Jul 12, 2016•69 citations

Fabrication of superconducting flux quantum bits and the feature parameters of Al/AlOx/Al tunnel junctions

Lin Wang, Weiwei Xu, Peiheng Wu +3 more

As one of the candidates for realizing quantum bits, superconducting quantum bits, based on Josephson junction, have the advantages of easy integrating, coupling with the outside environment and so on. Double-layer photoresist was used to prepare suspended shadow mask by deep ultra-violet (DUV) lithography. We fabricated the sample of superconducting flux quantum bits by electron beam evaporation and static oxidization with aluminum as superconducting material. According to the dependence of the flatness on the thickness of aluminum film, we select 60 nm as the thickness of the bottom electrode of tunnel junction. By increasing the distance between the evaporation source and the substrate, we have improved the smoothness of film and thus reduced the leakage current of tunnel junction. The tri-layer structure of aluminum tunnel junction was observed by transmission electron microscopy (TEM), and the relationship between the thickness of barrier layer and the oxidation pressure was obtained.

Chinese Science Bulletin (Chinese Version)•Sep 1, 2014•0 citations

Analysis of Hydrogen Contamination in Al/AlOx/Al Josephson Junctions

Yu Zhu, Aldilene Saraiva-Souza, Félix Beaudoin +1 more

Hydrogen contamination in Josephson junctions may contribute to device-to-device variability in superconducting qubits, yet its incorporation, location, and bonding in tunnel barriers remain poorly understood. We combine molecular dynamics simulations of aluminum oxidation in dense O2 and H2O environments with atomistic quantum transport calculations. The simulations produce amorphous AlOx barriers with experimentally relevant hydrogen concentrations. Analysis of 400 statistically independent samples shows that the number of incorporated H atoms follows a beta-binomial distribution, reflecting correlations arising from self-limiting oxidation. Most H atoms reside near the AlOx surface, primarily in Al-OH and Al-OH-Al motifs. Quantum transport calculations for Al/Al2O3/Al junctions reveal that hydrogen enhances transmission near the Fermi level by creating an interface dipole that shifts the oxide bands relative to the electrode Fermi level. Combining hydrogen-number statistics with calculated transmission coefficients yields a probability distribution for the Josephson energy. At an average hydrogen content of 2.56 at.%, we predict E_J/h = 10.23 GHz with a standard deviation of 3.6 MHz. Hydrogen shifts the mean Josephson energy by approximately 11%, proportionally to its concentration, but contributes far less to device-to-device variability than observed in state-of-the-art fabricated junctions. These findings provide an atomistic understanding of hydrogen incorporation and its impact on Josephson energy.

quant-pharXiv:2603.14113•Mar 17, 2026•0 citations

Multi-Modal Atomic-Scale Characterization of Interfacial Defects in Superconducting Transmon Qubits

Kassandra Weber, Jaeyel Lee, Akshay A. Murthy +1 more

In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.

Microscopy and Microanalysis•Jul 1, 2026•0 citations

Revealing the Origin and Nature of the Buried Metal‐Substrate Interface Layer in Ta/Sapphire Superconducting Films

Aswin kumar Anbalagan, Rebecca Cummings, Chenyu Zhou +14 more

Despite constituting a smaller fraction of the qubit's electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high-loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal-substrate interfacial layer that exists in Ta/sapphire-based superconducting films. Synchrotron-based X-ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal-substrate interface. Scanning transmission electron microscopy and core-level electron energy loss spectroscopy identified an intermixing layer (≈0.65 ± 0.05 nm) at the metal-substrate interface containing Al, O, and Ta atoms. Density functional theory modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition for two atomic terminations of sapphire. Using a multimodal approach, we gained deeper insights into the interface layer between the metal and substrate, which suggests that the orientation of deposited Ta films depend on the surface termination of sapphire. The observed elemental intermixing at the metal-substrate interface influences the thermodynamic stability and electronic behavior of the film, which may also affect qubit performance.

arXiv:2409.10780•Advanced Science•Feb 19, 2025•11 citations
The interface between the Al bottom contact layer and Si substrates in Al based Josephson junctions is believed to have a significant effect on the noise observed in Al based superconducting devices. We have studied the atomic structure of it by transmission electron microscopy. An amorphous layer with a thickness of ∼5 nm was found between the bottom Al electrode and HF-treated Si substrate. It results from intermixing between Al, Si, and O. We also studied the chemical bonding states among the different species using energy loss near edge structure. The observations are of importance for the understanding of the origin of decoherence mechanisms in qubits based on these junctions.
The development of quantum computers, capable of surpassing classical computing in solving specific complex problems, hinges on breakthroughs in materials science, precision device fabrication, and the optimization of quantum architectures [1]. Among the leading candidates for quantum computation, superconducting qubits, particularly those based on transmon designs, have shown promising advances with coherence times reaching hundreds of microseconds [2]. However, to fully unlock the potential of scalable quantum computing, further enhancements in coherence are necessary. The intricate structure-coherence relationship within these devices, especially at critical interfaces such as metal-air, metal-dielectric, and metal-substrate in Josephson junctions (JJs), poses a significant challenge due to the potential for two-level-system loss channels. Here, we detail our pioneering efforts to understand these structure-coherence relationships utilizing advanced electron microscopy techniques. Focusing on the Al-AlOx and Al-Si substrate interfaces in Josephson Junctions, we employ a combination of low-loss and core-loss electron energy loss spectroscopy (EELS) and four-dimensional scanning transmission electron microscopy (4D-STEM) conducted at room and ultra-low temperatures (sub-6 K). This approach allows for an unprecedented examination of the chemical composition, bonding environments, and nanoscale structures of key surfaces and interfaces critical to the quantum coherence. Figure 1 presents a typical superconducting architecture at the chip level; each superconducting qubit consists of a Josephson Junction in parallel with an ultra-low-loss capacitor to create a resonant structure in the 3-6GHz range. JJs are highlighted in the area boxed in Fig. 1A and can be observed in detail in Fig. 1B. Lamella cross-sections (as shown in Fig. 1C) were prepared using a dual-beam focused ion beam (FIB) FEI-SEM Helios Nanolab. The lift-off was performed using 30 kV Ga+ ions, and the final cleaning step was carried out at 2 kV to remove surface damage on the area of interest, resulting in a final sample thickness of 50-100 nm. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data were collected on a probe-corrected JEOL ARM200 S/TEM operating at 200 kV. The convergent angle for ADF-STEM imaging was 25 mrad. Electron energy loss spectra (EELS) were acquired at 200 kV using a Gatan GIF Quantum on a K2 pixelated detector. Data processing (background subtraction, plural scattering removal, and signal mapping) was conducted using Gatan GMS software. Four-dimensional STEM (4D-STEM) data were collected by a K3 and STELA cameras. The convergent angles were 0.5-1.5 mrad, and the camera length was 6-10 cm. The step size was 5-10 Å. Merging microscopic insights with electrical data and theoretical frameworks, we aim to reveal how atomic-scale irregularities affect coherence times. Our results highlight key decoherence mechanisms in superconducting qubits and suggest specific improvements for qubit design and manufacturing. By linking electron microscopy findings to device performance, we outline strategies to reduce decoherence, essential for achieving reliable quantum computing. This work bridges materials science and quantum engineering, driving efforts in making scalable quantum computers forward [3]. A) Microscopic view of a superconducting transmon qubit, highlighting its symmetric design with central island and capacitor pads. B) SEM image of a JJ displaying their Al top and bottom contacts. C) STEM image of a JJ showing its key components and interfaces: Al top and bottom contact, AlOx tunnel barrier, Si substrate and Al-Si interface. A) EELS chemical maps of two interfaces, Al/Al and Al/Si using K-edges of oxygen, aluminum and silicon of a Josephson junction. It is possible to detect a formation of oxides at both interfaces. Plots showing Al and Si K-edge at 1560 eV and 1839 eV, respectively, and the ELNES are shown on the right side (Scale bar in A – 20 nm). B) Analysis of the disordered Al phases at the interfaces utilizing ePDF.
Al/AlOx/Al Josephson junctions are the building blocks of a wide range of superconducting quantum devices that are key elements for quantum computers, extremely sensitive magnetometers and radiation detectors. The properties of the junctions and the superconducting quantum devices are determined by the atomic structure of the tunnel barrier. The nanoscale dimension and disordered nature of the barrier oxide have been challenges for the direct experimental investigation of the atomic structure of the tunnel barrier. Here we show that the miniaturized dimension of the barrier and the interfacial interaction between crystalline Al and amorphous AlOx give rise to oxygen deficiency at the metal/oxide interfaces. In the interior of the barrier, the oxide resembles the atomic structure of bulk aluminium oxide. Atomic defects such as oxygen vacancies at the interfaces can be the origin of the two-level systems and contribute to decoherence and noise in superconducting quantum circuits.
As one of the candidates for realizing quantum bits, superconducting quantum bits, based on Josephson junction, have the advantages of easy integrating, coupling with the outside environment and so on. Double-layer photoresist was used to prepare suspended shadow mask by deep ultra-violet (DUV) lithography. We fabricated the sample of superconducting flux quantum bits by electron beam evaporation and static oxidization with aluminum as superconducting material. According to the dependence of the flatness on the thickness of aluminum film, we select 60 nm as the thickness of the bottom electrode of tunnel junction. By increasing the distance between the evaporation source and the substrate, we have improved the smoothness of film and thus reduced the leakage current of tunnel junction. The tri-layer structure of aluminum tunnel junction was observed by transmission electron microscopy (TEM), and the relationship between the thickness of barrier layer and the oxidation pressure was obtained.
Hydrogen contamination in Josephson junctions may contribute to device-to-device variability in superconducting qubits, yet its incorporation, location, and bonding in tunnel barriers remain poorly understood. We combine molecular dynamics simulations of aluminum oxidation in dense O2 and H2O environments with atomistic quantum transport calculations. The simulations produce amorphous AlOx barriers with experimentally relevant hydrogen concentrations. Analysis of 400 statistically independent samples shows that the number of incorporated H atoms follows a beta-binomial distribution, reflecting correlations arising from self-limiting oxidation. Most H atoms reside near the AlOx surface, primarily in Al-OH and Al-OH-Al motifs. Quantum transport calculations for Al/Al2O3/Al junctions reveal that hydrogen enhances transmission near the Fermi level by creating an interface dipole that shifts the oxide bands relative to the electrode Fermi level. Combining hydrogen-number statistics with calculated transmission coefficients yields a probability distribution for the Josephson energy. At an average hydrogen content of 2.56 at.%, we predict E_J/h = 10.23 GHz with a standard deviation of 3.6 MHz. Hydrogen shifts the mean Josephson energy by approximately 11%, proportionally to its concentration, but contributes far less to device-to-device variability than observed in state-of-the-art fabricated junctions. These findings provide an atomistic understanding of hydrogen incorporation and its impact on Josephson energy.
In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.
Despite constituting a smaller fraction of the qubit's electromagnetic mode, surfaces and interfaces can exert significant influence as sources of high-loss tangents, which brings forward the need to reveal properties of these extended defects and identify routes to their control. Here, we examine the structure and composition of the metal-substrate interfacial layer that exists in Ta/sapphire-based superconducting films. Synchrotron-based X-ray reflectivity measurements of Ta films, commonly used in these qubits, reveal an unexplored interface layer at the metal-substrate interface. Scanning transmission electron microscopy and core-level electron energy loss spectroscopy identified an intermixing layer (≈0.65 ± 0.05 nm) at the metal-substrate interface containing Al, O, and Ta atoms. Density functional theory modeling reveals that the structure and properties of the Ta/sapphire heterojunctions are determined by the oxygen content on the sapphire surface prior to Ta deposition for two atomic terminations of sapphire. Using a multimodal approach, we gained deeper insights into the interface layer between the metal and substrate, which suggests that the orientation of deposited Ta films depend on the surface termination of sapphire. The observed elemental intermixing at the metal-substrate interface influences the thermodynamic stability and electronic behavior of the film, which may also affect qubit performance.