In this paper, we propose a new cooperative jamming (CJ) method to prevent eavesdroppers from using beam-formers to suppress the jamming signals. In this method, the broadcasting of system-node channel state information (CSI) is first averted. The transmitting and jamming signals are then aligned in two separate single dimensions in complex space. The decode-and-forward relaying protocol is employed.The proposed method is more effective than current CJ techniques.
In this paper, we propose a new cooperative jamming (CJ) method to prevent eavesdroppers from using beam-formers to suppress the jamming signals. In this method, the broadcasting of system-node channel state information (CSI) is first averted. The transmitting and jamming signals are then aligned in two separate single dimensions in complex space. The decode-and-forward relaying protocol is employed.The proposed method is more effective than current CJ techniques.
Unlike these conventional approaches that employ zero-forcing beam-forming (ZFB) and noise-like jamming techniques to provide wireless physical layer security, in this study, a jamming signal is proposed to be transmitted by the destination and carry a binary information message (BIM). Further, legitimate channel coefficient states (CSIs) are avoided from being listened by eavesdroppers. By smartly superposing the jamming signal onto the desire signal, an interest relay node can effectively decode the respective BIMs but still keeping a considerably degraded decoding performances at eavesdroppers. The protected BIMs allow this relay to create an exclusive-or (XOR) BIM which is always secured and does not require any further protection. It shows that the proposed method is in superiority to the conventional methods. Their outage performances are fully analyzed and compared in this paper.
We consider a cooperative wireless network in the presence of one or more eavesdroppers, and exploit node cooperation for achieving physical (PHY) layer based security. Two different cooperation schemes are considered. In the first scheme, cooperating nodes retransmit a weighted version of the source signal in a decode-and-forward (DF) fashion. In the second scheme, referred to as cooperative jamming (CJ), while the source is transmitting, cooperating nodes transmit weighted noise to confound the eavesdropper. We investigate two objectives: i) maximization of the achievable secrecy rate subject to a total power constraint and ii) minimization of the total power transmit power under a secrecy rate constraint. For the first design objective, we obtain the exact solution for the DF scheme for the case of a single or multiple eavasdroppers, while for the CJ scheme with a single eavesdropper we reduce the multivariate problem to a problem of one variable. For the second design objective, existing work introduces additional constraints in order to reduce the degree of difficulty, thus resulting in suboptimal solutions. Our work raises those constraints, and obtains either an analytical solution for the DF scheme with a single eavesdropper, or reduces the multivariate problem to a problem of one variable for the CJ scheme with a single eavesdropper. Numerical results are presented to illustrate the proposed results and compare them to existing work.
We employed node cooperation in a cooperative wireless network to achieve physical layer- based security. The case of a source-destination pair that works with the assistance of multiple cooperating nodes in the presence of an eavesdropper was considered in this study to improve the performance of secure wireless communications. A novel cooperative scheme, called the decode-and-forward plus cooperative jamming (DFCJ), was proposed. In this scheme, relay nodes transmit a weighted version of the source signals plus a common weighted jamming signal to confound the eavesdropper. The novel system design was proposed to determine cooperative node weights and transmit power allocation. In DFCJ, a closed-form solution is obtained to minimize the total transmit power that is subjected to a secrecy rate constraint under complete nulling of jamming signals at the destination. The results of the numerical evaluation of the transmit power and the obtained secrecy rate show that the proposed scheme can significantly improve the performance of wireless physical layer security compared with the original decode-and-forward scheme.
This paper proposes a new joint cooperative beamforming and jamming (JCBJ) scheme for improving the physical layer security of decode-and-forward wireless networks where a source node transmits to its destination with the aid of multiple intermediate nodes in the presence of an eavesdropper. In the proposed JCBJ scheme, we select the intermediate nodes succeeding in source decoding as the relays to forward the source transmission simultaneously by employing a beamforming weight vector, and meanwhile, use the remaining ones as the friendly jammers to disturb the eavesdropper by sending artificial noise. In order to achieve the secrecy rate maximum, we further study on the power allocation among the source, relays, and jammers under two assumptions of the wiretap link's channel state information. We derive the closed-form optimal solutions by first allocating the transmit power at the source within different ranges to consider all the possible relay selection schemes in which different numbers of relays are employed, and then transforming the multivariable power allocation problem to a set of single-variable optimization subproblems. Our numerical results show the superiority of the proposed JCBJ scheme and the proposed power allocation strategies.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.