This review will sketch the present state of affairs in applications of Josephson junctions and SQUIDs to: magnetometry, DC and RF metrology, detection and amplification of electromagnetic signals, frequency metrology, noise thermometry and computers. It will also mention recent progress in super-stable oscillators using superconducting resonant circuits, pulse transmission lines, and thin-film deviees to detect radiation or charged particles. Many of these topics are maturing nicely.
This review will sketch the present state of affairs in applications of Josephson junctions and SQUIDs to: magnetometry, DC and RF metrology, detection and amplification of electromagnetic signals, frequency metrology, noise thermometry and computers. It will also mention recent progress in super-stable oscillators using superconducting resonant circuits, pulse transmission lines, and thin-film deviees to detect radiation or charged particles. Many of these topics are maturing nicely.
Abstract Superconductor electronics combines passive and active superconducting components and sometimes normal resistors into functional circuits and systems that also include room-temperature electronics for amplification, power sources, necessary controls, etc., usually computer operated. Furthermore, complete systems include magnetic and electromagnetic shielding, cryogenic enclosures, and increasingly a cryocooler in self-contained units. Components or devices of low or high critical temperature superconductors include inductances (coils), passive transmission lines, resonators, antennae, filters, as well as active elements: Josephson junctions, Josephson oscillators, and superconducting quantum interference devices. Of multiple demonstrated applications, mostly but not only in science and metrology, currently most successful are voltage standards, astronomy detectors and large telescope cameras, instruments for material characterization, and magnetometers for geomagnetic prospecting. Major current efforts concentrate on energy-efficient high-end computing and quantum computing. The outcomes of these efforts are likely to be known in the course of the following decade.
Superconducting quantum electronics is formally born in 1911, three years after Heike Kamerlingh Onnes was able to liquefy helium at the University of Leiden in the Netherlands. Josephson junctions are simple devices made of two superconductors coupled through a thin barrier, which can be made of one of several layers of insulating, normal metal, or ferromagnetic material. This chapter discusses the surface impedance of superconductors and their behavior in the radiofrequency (RF) regime. After the Josephson junction discovery, many new applications surfaced and the Josephson junction has become to date the most versatile active element used for superconducting analogue, digital and quantum electronics. These applications include magnetometers and gradiometers based on RF and DC superconducting quantum interference devices (SQUIDs), Josephson voltage standards, analogue-to-digital converters, quasi-one-junction SQUIDs, digital logic circuits, quantum computing, quantum communication and quantum sensing. The chapter discusses some of its applications.
SQUIDs (superconducting quantum interference devices) have been in use for more than half a century and constitute one of the first macroscopic quantum devices. SQUIDs operating at millikelvin temperatures can act as qubits for quantum computers and the recent reports of more than 50 qubit circuits indicate how far the technology has developed. In this talk, the author will describe two other applications of SQUIDs as quantum detectors, focusing on single spin and single photon energy resolving detection. Most superconducting devices rely on tri-layer Josephson tunnel junctions which are not easily scalable to the nanoscale. We have developed a Josephson junction fabrication method, based on electron beam lithography or focused ion beam milling of a single thin film of superconductor (Nb generally) which can provide sizes down to 50 nm. These devices are particularly relevant for two main applications in quantum technology and metrology. First, by shrinking the size of the SQUID loop and the junctions to around 200 nm, the sensitivity of the SQUID for magnetization measurements is improved to the level where a single electron spin flip may be detected. This is possible at the relatively elevated temperature of 4K.
We are working with Surrey University to implant single magnetic ions within the SQUID loop to provide a platform to test this combination as the basis for a new form of qubit operating at higher temperatures than the conventional Transmon superconducting devices. A second SQUID based detector which we are developing is an inductive transition edge sensor device (ISTED) for energy resolving measurements of single photons. This is based on the development of conventional transition edge sensors where we detect the change of the penetration depth of a small thin film of superconductor when it absorbs a photon. In this way, a major source of noise in conventional TES may be avoided since the absorber remains in the superconducting state at all times. In this way we have demonstrated single photon detection at 633 nm with 0.1eV resolution at operating temperature of 7.5K.
Superconductive electronics is an extensive field covering both low- and high-temperature superconductors (HTS), and their applications in quantum interference devices, power transmission, microwave filters and logic circuits. The microscopic origins of superconductivity are explained by Bardeen–Cooper–Schieffer (BCS) theory whereas a macroscopic treatment is provided by the Ginzburg–Landau theory. The London equations can explain the well-known Meissner effect of exclusion of magnetic induction by superconductors. A widely used device in superconductive electronics is the Josephson junction (JJ). The DC and AC Josephson effects as well as the inverse AC Josephson effects are described. The application of DC and AC superconducting quantum interference devices (SQUIDs) in magnetometry are discussed. Rapid single flux quantum (RSFQ) logic, touted as a competitive beyond-CMOS technology in nanoelectronics, is briefly surveyed.
Since the discovery of the high-transition-temperature (T c ) superconductive oxide materials, there has been very substantial progress in the understanding and control of these materials in thin film form. Although the initial projections of rapid and pervasive applicability of the high T c materials in the market place have not been met, the sensibly reproducible synthesis of high-quality thin films on substrate wafers of up to 50.8 mm diameter has generated a wide variety of preprototype microwave components, some of which are already edging into the market place. The current state of the microwave properties of low T c and high T c thin film materials will be reviewed and selected examples of preprototype devices drawn from low T c and high T c technology will be described. These components include transmission lines, filters, mixers and amplifiers for microwave signals, and information processing circuits for wideband analogue and high-speed digital waveforms. Speculation is offered on the long-term applications of superconducting electronics. Despite the substantial progress in materials, much more is required. The technology which must be developed in order to deliver practical superconducting circuits will be highlighted.
Applications to electronics are mainly based on Josephson junctions special properties. As it was pointed before, a single Josephson junction is a perfect voltage to frequency converter (AC Josephson effect). One example is the application into RF amplifiers where a radiofrequency signal generates a magnetic flux in a circuit coupled to, for example, DC-SQUID. Josephson effect allows converting the flux into the SQUID to an amplified voltage signal, proportional to the number of 0. That is the base of the microwave applications. The SQUID inductance together with the capacitance of the junction, allows also using the device as resonator.