Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Conference on Optical Communication

All-Optical Wavelength-/Time-Selective Switching/Dropping/Swapping for 100-GHz-Spaced WDM Signals Using a Periodically Poled Lithium Niobate Waveguide

Jian Wang, H. Y. Fu, Dongyu Geng, Alan Eli Willner

Published Jan 1, 2012• 2 citations
Publisher

Abstract

By exploiting sum-frequency generation or cascaded sum- and difference-frequency generation in a periodically poled lithium niobate waveguide, we demonstrate wavelength-/time-selective switching/dropping/swapping. It is shown these operations are applicable for 100-GHz-spaced WDM signals owing to the narrow-band quasi-phase matching condition.

DOI
10.1364/eceoc.2012.th.1.a.5

Related papers

All-Optical Wavelength Conversion Based on the Cascaded Sum and Difference Frequency Generation in a Periodically Poled Lithium-Niobate Waveguide

Jian Wang

The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.

Optics & Optoelectronic Technology•Jan 1, 2007•0 citations

Ultrabroadband flattop wavelength conversion based on cascaded sum frequency generation and difference frequency generation using pump detuning in quasi-phase-matched lithium niobate waveguides

Meenu Ahlawat, Amirhossein Tehranchi, Chang Qing Xu +1 more

Flattop wavelength conversion over a 70 nm bandwidth in a 45-mm-long periodically poled lithium niobate (PPLN) waveguide based on nonlinear cascaded sum frequency generation (SFG) and difference frequency generation processes using two separated wavelengths, is realized. A 2 dB peak-to-peak ripple over the conversion bandwidth in the C band is observed when the two pumps are fixed for perfectly phase-matched SFG conversion; this is significantly reduced to 0.5 dB by slight detuning of one of the pumps to a longer wavelength. We also demonstrate multichannel broadcasting using two pumps to convert one signal wavelength to three idlers. Using the aperiodically poled lithium niobate waveguide increases the idler separation.

Applied Optics•Aug 5, 2011•11 citations

Flattening of cascaded sum- and difference-frequency generation-based wavelength conversion by pump or period detuning

Shiming Gao, Changxi Yang, Xiaosheng Xiao +3 more

We investigate response flatting of cascaded sum- and difference- frequency generation (SFG/DFG)-based wavelength conversion in quasi-phase-matched (QPM) periodically poled lithium niobate waveguides for wavelength division multiplexing optical communication systems. The cascaded SFG/DFG-based configuration shows more robustly combined properties than conventional DFG-based and cascaded second-harmonic generation and DFG (SHG/DFG)-based configurations. The response fluctuation, generated while enhancing the conversion bandwidth, can be efficiently reduced by the method of pump detuning or QPM period detuning.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 24, 2005•0 citations

Colorless all-optical sum and subtraction of phases for phase-shift keying signals based on a periodically poled lithium niobate waveguide

Antonio Malacarne, Emma Lazzeri, Valeria Vercesi +2 more

A colorless all-optical scheme performing the subtraction and addition of phases between phase-shift keying (PSK) signals exploiting cascaded sum and difference frequency generation in a periodically poled lithium niobate waveguide is introduced and experimentally demonstrated. The subtraction of phases of two 40 Gb/s differential quadrature PSK signals has been experimentally tested and performances have been analyzed in terms of bit error rate measurements.

Optics Letters•Sep 11, 2012•8 citations

Improved cascaded sum and difference frequency generation-based wavelength converters in low-loss quasi-phase-matched lithium niobate waveguides

Amirhossein Tehranchi, Raman Kashyap

We numerically evaluate the wavelength converters based on cascaded sum and difference frequency generation in quasi-phase-matched lithium niobate waveguides with and without loss. A technique is also proposed to flatten the response by increased detuning of the pump wavelength. We present the criteria for the design of waveguide length and the assignment of pump power to achieve the desired efficiency, ripple and bandwidth, assuming a large pump wavelength difference of 75 nm.

Applied Optics•Oct 22, 2009•10 citations

Response Flattening of Efficient Broadband Wavelength Converters Based on Cascaded Sum and Difference Frequency Generation in Periodically Poled Lithium Niobate Waveguides

Amirhossein Tehranchi, Raman Kashyap

For the single-pass and double-pass wavelength converters based on cascaded sum and difference frequency generation in quasi-phase matched lithium niobate waveguide, we present the criteria for a choice of the waveguide length and the assignment of pump powers to achieve the desired efficiency, ripple and bandwidth with a large pump wavelength difference of 75 nm. It is found that using the double-pass structure with a 95% reflectivity for the sum frequency wave, the mean efficiency is increased at least 5 dB compared to that of the single-pass one with the same length and input pump powers and the bandwidth is large enough to cover the entire conventional telecommunications C-band and long-wavelength L-band. To flatten the excessive response fluctuation of the double-pass scheme, we propose tuning one of the pumps to longer wavelengths incurring a small penalty of a slight reduction in the mean efficiency which can be compensated by increasing the input pump powers. We also show that to achieve the same amount of flatness, double-pass converters have a smaller efficiency penalty compared to the single-pass converters.

IEEE Journal of Quantum Electronics•Aug 24, 2009•7 citations
By exploiting sum-frequency generation or cascaded sum- and difference-frequency generation in a periodically poled lithium niobate waveguide, we demonstrate wavelength-/time-selective switching/dropping/swapping. It is shown these operations are applicable for 100-GHz-spaced WDM signals owing to the narrow-band quasi-phase matching condition.
The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.
Flattop wavelength conversion over a 70 nm bandwidth in a 45-mm-long periodically poled lithium niobate (PPLN) waveguide based on nonlinear cascaded sum frequency generation (SFG) and difference frequency generation processes using two separated wavelengths, is realized. A 2 dB peak-to-peak ripple over the conversion bandwidth in the C band is observed when the two pumps are fixed for perfectly phase-matched SFG conversion; this is significantly reduced to 0.5 dB by slight detuning of one of the pumps to a longer wavelength. We also demonstrate multichannel broadcasting using two pumps to convert one signal wavelength to three idlers. Using the aperiodically poled lithium niobate waveguide increases the idler separation.
We investigate response flatting of cascaded sum- and difference- frequency generation (SFG/DFG)-based wavelength conversion in quasi-phase-matched (QPM) periodically poled lithium niobate waveguides for wavelength division multiplexing optical communication systems. The cascaded SFG/DFG-based configuration shows more robustly combined properties than conventional DFG-based and cascaded second-harmonic generation and DFG (SHG/DFG)-based configurations. The response fluctuation, generated while enhancing the conversion bandwidth, can be efficiently reduced by the method of pump detuning or QPM period detuning.
For the single-pass and double-pass wavelength converters based on cascaded sum and difference frequency generation in quasi-phase matched lithium niobate waveguide, we present the criteria for a choice of the waveguide length and the assignment of pump powers to achieve the desired efficiency, ripple and bandwidth with a large pump wavelength difference of 75 nm. It is found that using the double-pass structure with a 95% reflectivity for the sum frequency wave, the mean efficiency is increased at least 5 dB compared to that of the single-pass one with the same length and input pump powers and the bandwidth is large enough to cover the entire conventional telecommunications C-band and long-wavelength L-band. To flatten the excessive response fluctuation of the double-pass scheme, we propose tuning one of the pumps to longer wavelengths incurring a small penalty of a slight reduction in the mean efficiency which can be compensated by increasing the input pump powers. We also show that to achieve the same amount of flatness, double-pass converters have a smaller efficiency penalty compared to the single-pass converters.