Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

World Journal of Condensed Matter Physics

Cryocooler Operation of a Pulse-Driven AC Josephson Voltage Standard at PTB

Oliver Kieler, Thomas Scheller, J. Kohlmann

Published Jan 1, 2013• 28 citations
Publisher

Abstract

The PTB Josephson Arbitrary Waveform Synthesizer (JAWS) enables the generation of arbitrary waveforms up to voltages of 70 mVRMS (199 mVPP) using two Josephson arrays in series containing 4000 Josephson junctions each. The SNS-like double-stacked junctions are based on NbxSi1-x as barrier material. While the JAWS system is typically operated using a Dewar with liquid helium, the operation in a closed-cycle pulse-tube cryocooler at temperatures around 4.2 K range was here investigated and successfully demonstrated. For this purpose a special designed cryoprobe was used to provide high quality pulses to the Josephson arrays.

DOI
10.4236/wjcmp.2013.34031

Related papers

Development and Fabrication of Improved Josephson Series Arrays with NbSi Barrier for AC Voltage Standards

J. Kohlmann, Oliver Kieler, Ruediger Wendisch +2 more

Series arrays of overdamped Josephson junctions compose the basis of AC Josephson voltage standards. Presently, an advanced technology is based on Josephson junctions consisting of an NbxSi1-xbarrier. Using junction stacks containing five Josephson junctions, series arrays of 15,000 junctions have been successfully fabricated at PTB for the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS). The operation of eight arrays simultaneously enable spectrally pure waveforms with output voltages above 1 V to be synthesized.

Conference on Precision Electromagnetic Measurements•Jul 1, 2018•2 citations

Towards a 1 V Josephson Arbitrary Waveform Synthesizer

Oliver Kieler, Ralf Behr, Ruediger Wendisch +3 more

The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.

IEEE Transactions on Applied Superconductivity•Nov 10, 2014•97 citations

Series Arrays of NbSi Barrier Junctions with RF Power Dividers for AC Josephson Voltage Standards

J. Kohlmann, Hao Tian, Oliver Kieler +3 more

Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.

Conference on Precision Electromagnetic Measurements•Aug 1, 2020•0 citations

Stacked Josephson Junction Arrays for the Pulse-Driven AC Josephson Voltage Standard

Oliver Kieler, Ruediger Wendisch, Rolf-Werner Gerdau +3 more

We developed a fabrication process to establish large arrays of up to 5-stacked Josephson junctions for the Josephson Arbitrary Waveform Synthesizer (JAWS). SNS-type Josephson junctions with NbxSi1-xbarriers are used for this application. By modifying our standard window process, e.g. to add a CMP (chemical mechanical polishing) and an ALD (atomic layer deposition) step, the yield of this process was increased. An output voltage of 1 V RMS could be achieved by using 4 JAWS arrays in series with a total number of 60,000 5-stacked junctions. The investigation of the current-voltage characteristics (IVC) showed an interesting and potentially useful feature. The required pulse amplitude per junction for getting the maximum Shapiro step width reduces for higher junction stacks. We found that the pulse power linearly reduces with the square of the junction number in the array. The origin of this effect might be a strong neighbour-neighbour interaction of the junctions, which are closely arranged within the stacked configuration. This might generate a strong self-synchronization of the junctions.

IEEE Transactions on Applied Superconductivity•Feb 20, 2021•18 citations

Development of josephson arbitrary waveform synthesizer at physikalisch-Technische bundesanstalt (PTB)

Oliver Kieler

This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.

Low Temperature Physics•Nov 1, 2024•6 citations

Improved design of superconductor/normal conductor/superconductor Josephson junction series arrays for an ac Josephson voltage standard

Oliver Kieler, J. Kohlmann, Franz Müller

Superconductor/normal conductor/superconductor (SNS) Josephson junction series arrays are the subject of research for the realization of a Josephson arbitrary waveform synthesizer (JAWS) based on pulse-driven Josephson junctions. Lumped arrays of SNS Josephson junctions are investigated for this application at the Physikalisch-Technische Bundesanstalt (PTB). The series arrays consisting of Nb/HfTi/Nb SNS junctions are embedded in the center line of a coplanar waveguide transmission line. To increase the ac output voltage, the Josephson junction series array is designed as a meander-like structure. A broadband response of the arrays is required for the complex pulse operation of the JAWS. The arrays are investigated by dc measurements and for test purposes under continuous microwave irradiation at different frequencies. Flat Shapiro steps were measured for meander-like series arrays with 21 parallel lines containing up to 10 752 junctions. A sine wave with a frequency of 2.5 kHz and a peak voltage of 214 mV Peak was synthesized under pulse mode operation.

Superconductor Science and Technology•Oct 18, 2007•28 citations
The PTB Josephson Arbitrary Waveform Synthesizer (JAWS) enables the generation of arbitrary waveforms up to voltages of 70 mVRMS (199 mVPP) using two Josephson arrays in series containing 4000 Josephson junctions each. The SNS-like double-stacked junctions are based on NbxSi1-x as barrier material. While the JAWS system is typically operated using a Dewar with liquid helium, the operation in a closed-cycle pulse-tube cryocooler at temperatures around 4.2 K range was here investigated and successfully demonstrated. For this purpose a special designed cryoprobe was used to provide high quality pulses to the Josephson arrays.
Series arrays of overdamped Josephson junctions compose the basis of AC Josephson voltage standards. Presently, an advanced technology is based on Josephson junctions consisting of an NbxSi1-xbarrier. Using junction stacks containing five Josephson junctions, series arrays of 15,000 junctions have been successfully fabricated at PTB for the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS). The operation of eight arrays simultaneously enable spectrally pure waveforms with output voltages above 1 V to be synthesized.
The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.
Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.
We developed a fabrication process to establish large arrays of up to 5-stacked Josephson junctions for the Josephson Arbitrary Waveform Synthesizer (JAWS). SNS-type Josephson junctions with NbxSi1-xbarriers are used for this application. By modifying our standard window process, e.g. to add a CMP (chemical mechanical polishing) and an ALD (atomic layer deposition) step, the yield of this process was increased. An output voltage of 1 V RMS could be achieved by using 4 JAWS arrays in series with a total number of 60,000 5-stacked junctions. The investigation of the current-voltage characteristics (IVC) showed an interesting and potentially useful feature. The required pulse amplitude per junction for getting the maximum Shapiro step width reduces for higher junction stacks. We found that the pulse power linearly reduces with the square of the junction number in the array. The origin of this effect might be a strong neighbour-neighbour interaction of the junctions, which are closely arranged within the stacked configuration. This might generate a strong self-synchronization of the junctions.
This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.
Superconductor/normal conductor/superconductor (SNS) Josephson junction series arrays are the subject of research for the realization of a Josephson arbitrary waveform synthesizer (JAWS) based on pulse-driven Josephson junctions. Lumped arrays of SNS Josephson junctions are investigated for this application at the Physikalisch-Technische Bundesanstalt (PTB). The series arrays consisting of Nb/HfTi/Nb SNS junctions are embedded in the center line of a coplanar waveguide transmission line. To increase the ac output voltage, the Josephson junction series array is designed as a meander-like structure. A broadband response of the arrays is required for the complex pulse operation of the JAWS. The arrays are investigated by dc measurements and for test purposes under continuous microwave irradiation at different frequencies. Flat Shapiro steps were measured for meander-like series arrays with 21 parallel lines containing up to 10 752 junctions. A sine wave with a frequency of 2.5 kHz and a peak voltage of 214 mV Peak was synthesized under pulse mode operation.