Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Josephson voltage standards

Clark A. Hamilton

Published Oct 1, 2000• 202 citations
Publisher

Abstract

This paper reviews the development and use of Josephson voltage standards over the last 30 years, including classical dc standards, programmable standards based on binary weighted arrays, pulse-driven delta–sigma standards for ac wave-form synthesis, and single-flux-quantum voltage multipliers.
DOI
10.1063/1.1289507

Related papers

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations

Pulse-Driven High- TC Josephson Junctions for Quantum Voltage Devices

Adam C. Weis, Nathan E. Flowers-Jacobs, E.Y. Cho +6 more

Josephson junction arrays are the basis for quantum-accurate dc and ac voltage standards, including artificial voltage-noise references used in noise thermometry. I will describe our recent progress towards voltage synthesis using high-transition-temperature YBCO junctions.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•0 citations

Investigation of binary Josephson arrays for arbitrary waveform synthesis

Peter Kleinschmidt, P. Patel, Jonathan M. J. Williams +1 more

Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.

IEE Proceedings - Science Measurement and Technology•Nov 4, 2002•34 citations

Josephson waveform synthesizers

J. Niemeyer, Oliver Kieler, F. Muller +3 more

The DC voltage across a Josephson junction is exactly determined by the number of single flux quanta Φ0passing the junction per second. By locking this flux train to an external sinusoidal microwave with the frequency f or a pulse train with the pulse rate f in such a way that one flux quantum is transferred per microwave period or per pulse respectively, the junction DC voltage becomes V=Φ0f in the simplest case. The precision of V is only determined by the uncertainty of the frequency control. As the output voltage is relatively small (V=140μV for f=70GHz), large series arrays of n Josephson junctions must be used to increase the voltage to practical levels V=nΦ0f. With a sinusoidal 70 GHz microwave drive and series arrays of up to 14000 SIS tunnel junctions modern DC voltage standards were developed in the past which may reach a reproducibility of a few parts in 10-10. These standards are commercially available and form the basis of the legal voltage metrology of most of the national laboratories worldwide. Because the reference voltages of these standards are widely overlapping it is difficult to rapidly adjust the desired voltage. It was therefore impossible to use these quantum voltmeters for the precise analysis of AC voltages. For this purpose the arrays had to be modified in many respects. The direct way to generate arbitrary Josephson waveforms V(t) is to rapidly alter the frequency f(t) with respect to the desired waveform V(t)=nf(t)Φ0. It requires a precise flux transfer control over a very wide frequency range.

International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves•Jun 1, 2010•0 citations

Josephson voltage standard based on single-flux-quantum voltage multipliers

C.A. Hamilton

A Josephson single-flux-quantum voltage/frequency multiplier circuit is proposed as the basic building block for a new generation of voltage standards. The circuit uses magnetic coupling to synchronize a series array of independent junction oscillators to the flux flow in a Josephson transmission line. A cascade of these circuits can multiply an arbitrarily low input frequency up to the frequency limit of the circuit ( approximately=250 GHz) and then add the voltages across approximately 30000 oscillators to generate precise voltages up to 10 V. Because the oscillators can be switched on and off with a bias current, the output voltage is rapidly programmable. A complete design for a voltage standard programmable in 1.2- mu V increments to a maximum of 10 V is proposed. Using existing fabrication technology, the circuit would cover a substrate area of about 1 cm/sup 2/ and use 67210 junctions.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1992•46 citations

AC metrology applications of the Josephson effect

Samuel P. Benz, John Biesecker, Charles J. Burroughs +10 more

The performance of programmable voltage signals that exploit the quantum behavior of superconducting Josephson junctions continues to improve and enhance measurements in metrology, communications, and quantum control. We review advances in pulse-driven digital synthesis techniques with Josephson-junction-based devices. Quantum-based synthesis of voltage waveforms has been demonstrated at frequencies up to 3 GHz and rms amplitudes up to 4 V. Josephson pulse generators have also been used to control and characterize superconducting qubits.

Applied Physics Letters•Jul 29, 2024•10 citations
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.
Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.
The DC voltage across a Josephson junction is exactly determined by the number of single flux quanta Φ0passing the junction per second. By locking this flux train to an external sinusoidal microwave with the frequency f or a pulse train with the pulse rate f in such a way that one flux quantum is transferred per microwave period or per pulse respectively, the junction DC voltage becomes V=Φ0f in the simplest case. The precision of V is only determined by the uncertainty of the frequency control. As the output voltage is relatively small (V=140μV for f=70GHz), large series arrays of n Josephson junctions must be used to increase the voltage to practical levels V=nΦ0f. With a sinusoidal 70 GHz microwave drive and series arrays of up to 14000 SIS tunnel junctions modern DC voltage standards were developed in the past which may reach a reproducibility of a few parts in 10-10. These standards are commercially available and form the basis of the legal voltage metrology of most of the national laboratories worldwide. Because the reference voltages of these standards are widely overlapping it is difficult to rapidly adjust the desired voltage. It was therefore impossible to use these quantum voltmeters for the precise analysis of AC voltages. For this purpose the arrays had to be modified in many respects. The direct way to generate arbitrary Josephson waveforms V(t) is to rapidly alter the frequency f(t) with respect to the desired waveform V(t)=nf(t)Φ0. It requires a precise flux transfer control over a very wide frequency range.
A Josephson single-flux-quantum voltage/frequency multiplier circuit is proposed as the basic building block for a new generation of voltage standards. The circuit uses magnetic coupling to synchronize a series array of independent junction oscillators to the flux flow in a Josephson transmission line. A cascade of these circuits can multiply an arbitrarily low input frequency up to the frequency limit of the circuit ( approximately=250 GHz) and then add the voltages across approximately 30000 oscillators to generate precise voltages up to 10 V. Because the oscillators can be switched on and off with a bias current, the output voltage is rapidly programmable. A complete design for a voltage standard programmable in 1.2- mu V increments to a maximum of 10 V is proposed. Using existing fabrication technology, the circuit would cover a substrate area of about 1 cm/sup 2/ and use 67210 junctions.>
The performance of programmable voltage signals that exploit the quantum behavior of superconducting Josephson junctions continues to improve and enhance measurements in metrology, communications, and quantum control. We review advances in pulse-driven digital synthesis techniques with Josephson-junction-based devices. Quantum-based synthesis of voltage waveforms has been demonstrated at frequencies up to 3 GHz and rms amplitudes up to 4 V. Josephson pulse generators have also been used to control and characterize superconducting qubits.