Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEE Proceedings - Science Measurement and Technology

Investigation of binary Josephson arrays for arbitrary waveform synthesis

Peter Kleinschmidt, P. Patel, Jonathan M. J. Williams, T. J. B. M. Janssen

Published Nov 4, 2002• 34 citations
Publisher

Abstract

Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.

DOI
10.1049/ip-smt:20020759

Related papers

Arbitary waveform synthesis using binary Josephson arrays.

Peter Kleinschmidt, P. Patel, J M Williams +6 more

The Josephson primary DC voltage standard is very successful quantum standard. Recently it has become possible to divide Josephson arrays up into binary segments, thereby creating the possibility of developing a digital to analogue converter with quantum accuracy. These new arrays are based upon non-hysteretic Josephson junctions, which allow the voltage to be changed almost instantaneously. In this paper we will investigate the properties of two different types of Josephson arrays, one type is an intrinsically shunted array of junctions or so-called SINIS array, while the second type is externally shunted via small on-chip resistors. The arrays are biased using a purpose built computer controlled bias source discussed in a separate paper in this conference. We will discuss the accuracy of the generated voltage and investigate the ac properties.

•Jan 1, 2001•0 citations

Synthesis of Precision Waveforms Using a SINIS Josephson Junction Array

Ralf Behr, Jonathan M. J. Williams, P. Patel +3 more

A synthesizer of precision ac waveforms based on a binary superconductor insulator-normal metal-insulator-superconductor (SINIS) Josephson junction array has been developed. The array segments are individually biased using a high-speed bias source which gives a switching time of approximately 250 ns between voltage steps. The accuracy limitations of the system due to limited risetime and bandwidth are discussed. Comparisons between the synthesizer and a planar multijunction thermal converter (PMJTC) indicate that it is possible to synthesize sine waves with known rms value having an accuracy in the range of 1 part in 10/sup 7/.

IEEE Transactions on Instrumentation and Measurement•Mar 21, 2005•105 citations

Binary AC Josephson system and bias current circuits at NIM

Zengmin Wang, Yuan Gao, Honghui Li

This paper reports the progress of binary Josephson system for precise ac waveform synthesis in National Institute of Metrology, China (NIM). We designed a 32-channel bias source for dynamic voltage synthesis up to 1 kHz with a programmable Josephson junction array. The latest design of output drive current has a rise-time less than 50 ns on 100 ohm resistant. The 32-channel bias source is able to simultaneously provide bias current for two 1-volt SINIS junction arrays to synthesis two synchronous AC voltages.

Conference on Precision Electromagnetic Measurements•Jul 1, 2012•4 citations

Development of Josephson junction series arrays for synthesis of AC voltages and arbitrary waveforms

J. Kohlmann, F Müller, Ralf Behr +4 more

Josephson junctions operated by short pulses make the synthesis of AC and arbitrary waveforms possible. Series arrays of intrinsically shunted SINIS and SNS Josephson junctions were developed and characterized for applications in this Josephson arbitrary waveform synthesizer (S: Superconductor, I: Insulator, N: Normal conductor). First measurements under pulse irradiation are presented.

Journal of Physics Conference Series•Jun 1, 2006•11 citations

Josephson Series Arrays for Programmable 10-V SINIS Josephson Voltage Standards and for Josephson Arbitrary Waveform Synthesizers Based on SNS Junctions

J. Kohlmann, F. Muller, Oliver Kieler +4 more

Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages

IEEE Transactions on Instrumentation and Measurement•Mar 16, 2007•32 citations

One-Volt Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Steven B. Waltman, Anna E. Fox +6 more

A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.

IEEE Transactions on Applied Superconductivity•Sep 17, 2014•60 citations
Arrays of Josephson junctions have been used successfully for many years as the primary standard of voltage. A recent development has been the fabrication of arrays, based on non-hysteretic Josephson junctions, which allows the voltage output to be changed almost instantaneously. When these arrays are divided into binary segments a ‘digital-to-analogue converter’ with quantum accuracy is created. The properties of two types of array, a SINIS array, using intrinsic shunting of the Josephson junctions, and a SIS array with external, on-chip shunting have been investigated. The accuracy of the generated voltages and AC properties of the arrays when driven with a purpose-built, programmable current bias source are discussed. It is anticipated that a Josephson standard having waveforms with calculable rms values of AC voltage will soon be available.
The Josephson primary DC voltage standard is very successful quantum standard. Recently it has become possible to divide Josephson arrays up into binary segments, thereby creating the possibility of developing a digital to analogue converter with quantum accuracy. These new arrays are based upon non-hysteretic Josephson junctions, which allow the voltage to be changed almost instantaneously. In this paper we will investigate the properties of two different types of Josephson arrays, one type is an intrinsically shunted array of junctions or so-called SINIS array, while the second type is externally shunted via small on-chip resistors. The arrays are biased using a purpose built computer controlled bias source discussed in a separate paper in this conference. We will discuss the accuracy of the generated voltage and investigate the ac properties.
A synthesizer of precision ac waveforms based on a binary superconductor insulator-normal metal-insulator-superconductor (SINIS) Josephson junction array has been developed. The array segments are individually biased using a high-speed bias source which gives a switching time of approximately 250 ns between voltage steps. The accuracy limitations of the system due to limited risetime and bandwidth are discussed. Comparisons between the synthesizer and a planar multijunction thermal converter (PMJTC) indicate that it is possible to synthesize sine waves with known rms value having an accuracy in the range of 1 part in 10/sup 7/.
This paper reports the progress of binary Josephson system for precise ac waveform synthesis in National Institute of Metrology, China (NIM). We designed a 32-channel bias source for dynamic voltage synthesis up to 1 kHz with a programmable Josephson junction array. The latest design of output drive current has a rise-time less than 50 ns on 100 ohm resistant. The 32-channel bias source is able to simultaneously provide bias current for two 1-volt SINIS junction arrays to synthesis two synchronous AC voltages.
Programmable Josephson voltage standards for output voltages up to 10 V have been realized. Binary-divided series arrays consisting of 69 632 overdamped SINIS Josephson junctions have been fabricated using reliable Nb-Al/Al2O3technology (S: superconductor, I: insulator, N: normal metal). Series arrays of about 1000 SNS Josephson junctions were realized as lumped arrays for applications in the Josephson arbitrary waveform synthesizer (JAWS). We suggest a novel scheme for combining the higher voltages generated by the binary-divided arrays with the frequency spectral characteristics of the JAWS, in order to optimize the frequency spectrum of the generated ac voltages
A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.