Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics D Applied Physics

The Josephson junction as a frequency analyser and mixer of submillimetre radiation sources

T. G. Blaney, C. C. Bradley

Published Jan 1, 1972• 15 citations
Publisher

Abstract

In an extension of earlier work, the response of niobium-niobium point-contact Josephson junctions to radiation from hydrogen cyanide and deuterium cyanide lasers has been studied. Constant voltage steps corresponding to the 805, 891 and 964 GHz lines from a HCN laser have been observed as well as steps corresponding to the frequency mixtures of all these lines. In addition, subharmonic and harmonics of `mixed-frequency' steps have also been observed. The first observation of Josephson step structure corresponding to the 1540 and 1578 GHz emissions of a DCN laser is reported.

DOI
10.1088/0022-3727/5/1/324

Related papers

Experiments using a superconducting point-contact harmonic mixer near 1 THz

T. G. Blaney, D. J. E. Knight

Experiments are described in which simple and relatively reliable point-contact Josephson junctions were used to generate and mix harmonics (up to the 50th) of microwave klystron frequencies with emissions from a hydrogen cyanide laser operating at 891 GHz. Data are presented illustrating the variation of the intermediate frequency signal with DC bias current through the junction and incident radiation power levels, and the results compared, where possible, with a simple qualitative theory of Josephson mixing. Details are also given of experiments in which such a mixer was used to phase-lock a klystron to the laser, enabling the laser frequency to be accurately and continuously monitored.

Journal of Physics D Applied Physics•May 21, 1973•23 citations

Harmonic mixing with Josephson point contacts

Jean–Michel Lourtioz, Robert Adde, G. Vernet +1 more

Experiments are described in which Josephson point contacts were used to generate and mix harmonics (up to the 96th) of microwave klystrons with the radiation from an HCN laser at 891 GHz. A qualitative analysis of mixing of two external radiations in a Josephson junction is given in order to understand the existence of mixing components independent of the Josephson oscillation frequency and linewidth. The spectral analysis of the HCN laser shows the importance of the microwave source spectral purity when frequency multiplication by large factors is considered.

Revue de Physique Appliquée•Jan 1, 1977•3 citations

Direct 825th harmonic mixing of a 1 GHz source with an HCN laser in a Josephson junction

T. G. Blaney, D. J. E. Knight

Signals near 1 GHz were multiplied in frequency by up to 825 times and mixed with the hydrogen cyanide laser frequency at 891 GHz in point-contact Josephson junctions. The 1 GHz signals were generated by direct multiplication from a 120 MHz quartz-crystal oscillator, and no microwave transfer oscillator was needed. The maximum IF output powers obtained in these and other harmonic mixing experiments (using the same laser) were found to agree quite well with a simple theory which predicts a limit proportional to the square of the frequency being multiplied in the Josephson junction. This provides a criterion for determining the lowest frequency at which to begin multiplication in a Josephson device.

Journal of Physics D Applied Physics•Sep 21, 1974•37 citations

Heterodyne laser radiation detection at 891 GHz using josephson point contacts

T. G. Blaney

Experiments were carried out to investigate the performance of a heterodyne detector at 891 GHz using a cw hydrogen cyanide laser as the local oscillator and Nb-Nb point contact Josephson junctions as mixing devices. Using a second off-tuned HCN laser as the signal, intermediate frequencies (IF's) up to a few MHz could be studied. Both pre-set and adjustable types of junction were used, and the latter, arranged so that radiation could be directly focussed onto them gave the best ultimate sensitivity. Dependence of the IF power on dc current bias and local oscillator power is described, and compared with simple theory. IF power varied linearly with signal power for signals less than 10-5 to 10-6 W. The mixer conversion efficiency was independent of IF. The sensitivity of the detector was a strong function of junction characteristics and ranged over several orders of magnitude in the junctions studied. Noise at the output was dominated by the room temperature preamplifier with a noise temperature of about 500 K. The smallest observed value for conversion loss of the junction was about 29 dB. This figure includes the signal input matching loss. The best sensitivity of the whole receiving system was equivalent to 1 × 10-17 W/Hz.

Revue de Physique Appliquée•Jan 1, 1974•20 citations

Point-contact-type Josephson harmonic mixer for frequency measurement of far-infrared lasers

Yukinobu Miki, Eiichi Sakuma, Masanao Morimura

Point-contact-type Josephson junctions have been developed as a harmonic mixer to measure far-infrared (FIR) laser frequencies in a frequency chain up to the infrared region. The junctions were formed by mechanically pressing a niobium wire of 70 μm in diameter with a sharply etched tip against a niobium post of 2 mm in diameter. The voltage-current characteristics of the mixers were investigated under the irradiation of FIR lights from an optically pumped methyl-alcohol laser. The Shapiro steps for FIR lights up to 3.1 THz were observed. The mixing properties of the mixers were studied through harmonic mixing experiments of 50-GHz microwaves and the FIR lights up to the frequency of 3.1 THz. The conversion efficiency of the beat signals to the incident FIR power was found to vary as the — 4th power of the FIR frequency. From the mixing properties, the combination of the critical current Icof the junction and the product IcRnwhere Rnis the normal resistance of the junction, was found important to optimize the mixing performance.

IEEE Transactions on Instrumentation and Measurement•Jun 1, 1987•3 citations

Harmonic mixing in thin film niobium nitride Josephson tunnel junctions

M. C. Wicks

Beats between the harmonics of a microwave signal and various submillimetre laser lines above 890 GHz have been observed in the output from NbN Josephson junctions. Results of these mixing experiments will be described and discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Dec 1, 1990•1 citation
In an extension of earlier work, the response of niobium-niobium point-contact Josephson junctions to radiation from hydrogen cyanide and deuterium cyanide lasers has been studied. Constant voltage steps corresponding to the 805, 891 and 964 GHz lines from a HCN laser have been observed as well as steps corresponding to the frequency mixtures of all these lines. In addition, subharmonic and harmonics of `mixed-frequency' steps have also been observed. The first observation of Josephson step structure corresponding to the 1540 and 1578 GHz emissions of a DCN laser is reported.
Experiments are described in which simple and relatively reliable point-contact Josephson junctions were used to generate and mix harmonics (up to the 50th) of microwave klystron frequencies with emissions from a hydrogen cyanide laser operating at 891 GHz. Data are presented illustrating the variation of the intermediate frequency signal with DC bias current through the junction and incident radiation power levels, and the results compared, where possible, with a simple qualitative theory of Josephson mixing. Details are also given of experiments in which such a mixer was used to phase-lock a klystron to the laser, enabling the laser frequency to be accurately and continuously monitored.
Experiments are described in which Josephson point contacts were used to generate and mix harmonics (up to the 96th) of microwave klystrons with the radiation from an HCN laser at 891 GHz. A qualitative analysis of mixing of two external radiations in a Josephson junction is given in order to understand the existence of mixing components independent of the Josephson oscillation frequency and linewidth. The spectral analysis of the HCN laser shows the importance of the microwave source spectral purity when frequency multiplication by large factors is considered.
Signals near 1 GHz were multiplied in frequency by up to 825 times and mixed with the hydrogen cyanide laser frequency at 891 GHz in point-contact Josephson junctions. The 1 GHz signals were generated by direct multiplication from a 120 MHz quartz-crystal oscillator, and no microwave transfer oscillator was needed. The maximum IF output powers obtained in these and other harmonic mixing experiments (using the same laser) were found to agree quite well with a simple theory which predicts a limit proportional to the square of the frequency being multiplied in the Josephson junction. This provides a criterion for determining the lowest frequency at which to begin multiplication in a Josephson device.
Experiments were carried out to investigate the performance of a heterodyne detector at 891 GHz using a cw hydrogen cyanide laser as the local oscillator and Nb-Nb point contact Josephson junctions as mixing devices. Using a second off-tuned HCN laser as the signal, intermediate frequencies (IF's) up to a few MHz could be studied. Both pre-set and adjustable types of junction were used, and the latter, arranged so that radiation could be directly focussed onto them gave the best ultimate sensitivity. Dependence of the IF power on dc current bias and local oscillator power is described, and compared with simple theory. IF power varied linearly with signal power for signals less than 10-5 to 10-6 W. The mixer conversion efficiency was independent of IF. The sensitivity of the detector was a strong function of junction characteristics and ranged over several orders of magnitude in the junctions studied. Noise at the output was dominated by the room temperature preamplifier with a noise temperature of about 500 K. The smallest observed value for conversion loss of the junction was about 29 dB. This figure includes the signal input matching loss. The best sensitivity of the whole receiving system was equivalent to 1 × 10-17 W/Hz.
Point-contact-type Josephson junctions have been developed as a harmonic mixer to measure far-infrared (FIR) laser frequencies in a frequency chain up to the infrared region. The junctions were formed by mechanically pressing a niobium wire of 70 μm in diameter with a sharply etched tip against a niobium post of 2 mm in diameter. The voltage-current characteristics of the mixers were investigated under the irradiation of FIR lights from an optically pumped methyl-alcohol laser. The Shapiro steps for FIR lights up to 3.1 THz were observed. The mixing properties of the mixers were studied through harmonic mixing experiments of 50-GHz microwaves and the FIR lights up to the frequency of 3.1 THz. The conversion efficiency of the beat signals to the incident FIR power was found to vary as the — 4th power of the FIR frequency. From the mixing properties, the combination of the critical current Icof the junction and the product IcRnwhere Rnis the normal resistance of the junction, was found important to optimize the mixing performance.