Superconductive single flux quantum (SFQ) circuits, which perform their circuit operations by controlling propagations of flux quanta in connected superconducting rings, can operate at the frequency of several tens GHz with ultra low power dissipation. The SFQ circuit is thought to be an attractive candidate for fundamental elements of future high-end information processing systems. This paper reports the development of SFQ microprocessors for high-end computation systems.
Superconductive single flux quantum (SFQ) circuits, which perform their circuit operations by controlling propagations of flux quanta in connected superconducting rings, can operate at the frequency of several tens GHz with ultra low power dissipation. The SFQ circuit is thought to be an attractive candidate for fundamental elements of future high-end information processing systems. This paper reports the development of SFQ microprocessors for high-end computation systems.
Single-flux quantum logic (SFQ) circuits, in which a flux quantum is used as an information carrier, have the possibility for opening the door to a new digital system operated at over 100-GHz clock frequency at extremely low power dissipation. The SFQ logic system is a so-called pulse logic, which is completely different from the level logic for semiconductors like CMOS, so circuit design technologies for SFQ logic circuits have to be newly developed. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits at high speeds has been made. With advances in these design tools, large-scale circuits including more than several thousand junctions can be easily operated with the clock frequency of more than several tens of gigahertz. High-end routers and high-end computers are possible applications of SFQ logic circuits because of their high throughput nature and the low power dissipation of SFQ logic. In this paper, recent advances of SFQ circuit design technologies and recent developments of switches for high-end routers and microprocessors for high-end computers that are considered possible applications for SFQ logic will be described.
Single flux quantum (SFQ) logic circuits, in which a single flux quantum is used for an information carrier, have a possibility to open a new digital system operated with over 100 GHz clock frequencies at extremely low power dissipations. Recently, much progress in basic technologies for designing SFQ circuits and operating circuits with high speeds has been done. By taking advancements in these designing tools, circuits including more than several thousands junctions easily operated with the clock frequency of more than several tens GHz. Applications of SFQ circuits such as high performance computers, high end router and high end servers are being developed in the world taking advantages of the high through-put nature and the low power dissipation of the SFQ logic.
I describe the fundamental technologies concerning the single flux quantum (SFQ) logic circuits. Recent remarkable progress in the computer-aided-design (CAD) tool, which is based on the cell-based design technique, enables us to make SFQ integrated circuits. Although the circuit demonstrated so far has 2, 300 Josephson junctions at most, this number will increase because the CAD tool is advancing. The on-chip test system has also been developed to test the high-speed nature of the SFQ circuit. For example, the shift-register employed as a circuit under test operates correctly at 55GHz. I also describe the potential applications of the SFQ circuits. An analog-to-digital converter utilizing the high-speed nature and high sensitivity in the SFQ circuits will be applicable to the front end of the future base stations, which require broad band width, high sensitivity, and flexibility. Packet switches used in the future high-end router need high throughput and functionality. Only SFQ-based packet switches can meet these requirements. Another potential application is a high-end server. We have studied micro-architectures of a processor executing the Java Byte Codes directly and a multiprocessor system constructed by connecting the processors and memories via the ultra-broad-band SFQ network switches. Throughout the study, we employ the concept of the complexity-reduction (CORE), in which the high-speed nature of the SFQ circuits is used for the reduction of the circuit scale or simplification of the micro-architecture; the multiprocessor system has high performances. These clear applications promote rapid technological progress in the SFQ technology, though we must make every endeavor to find new application fields.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
We describe the development of single-flux-quantum (SFQ) microprocessors and the related technologies such as designing, circuit architecture, microarchitecture, etc. Since the microprocessors studied here aim for a general-purpose computing system, we employ the complexity-reduced (CORE) architecture in which the high-speed nature of the SFQ circuits is used not for increasing processor performance but for reducing the circuit complexity. The bit-serial processing is the most suitable way to realize the CORE architecture. We assembled all the best technologies concerning SFQ integrated circuits and designed the SFQ microprocessors, CORE1α, CORE1β, and CORE1γ. The CORE1β was made up of about 11000 Josephson junctions and successfully demonstrated. The peak performance reached 1400 million operations per second with a power consumption of 3.4mW. We showed that the SFQ microprocessors had an advantage in a performance density to semiconductor's ones, which lead to the potential for constructing a high performance SFQ-circuit-based computing system.
This paper describes our programme to develop and demonstrate ultra-high performance single flux quantum (SFQ) VLSI technology that will enable superconducting digital processors for petaFLOPS-scale computing. In the hybrid technology, multi-threaded architecture, the computational engine to power a petaFLOPS machine at affordable power will consist of 4096 SFQ multi-chip processors, with 50 to 100 GHz clock frequency and associated cryogenic RAM. We present the superconducting technology requirements, progress to date and our plan to meet these requirements. We improved SFQ Nb VLSI by two generations, to a 8 kA cm −2 , 1.25 µm junction process, incorporated new CAD tools into our methodology, demonstrated methods for recycling the bias current and data communication at speeds up to 60 Gb s −1 , both on and between chips through passive transmission lines. FLUX-1 is the most ambitious project implemented in SFQ technology to date, a prototype general-purpose 8 bit microprocessor chip. We are testing the FLUX-1 chip (5K gates, 20 GHz clock) and designing a 32 bit floating-point SFQ multiplier with vector-register memory. We report correct operation of the complete stripline-connected gate library with large bias margins, as well as several larger functional units used in FLUX-1. The next stage will be an SFQ multi-processor machine. Important challenges include further reducing chip supply current and on-chip power dissipation, developing at least 64 kbit, sub-nanosecond cryogenic RAM chips, developing thermally and electrically efficient high data rate cryogenic-to-ambient input/output technology and improving Nb VLSI to increase gate density.