We discuss a fundamental limitation for the coherent operation of superconducting quantum bits originating from phonon radiation generated in the Josephson junctions of the device. The time dependent superconducting phase across the junction produces an electric field that couples to the underlying crystal lattice via the piezoelectric effect. We determine the radiation resistance of the junction due to phonon emission and derive substantial decoherence rates for the quantum bits, which are compatible with quality factors measured in recent experiments.
We discuss a fundamental limitation for the coherent operation of superconducting quantum bits originating from phonon radiation generated in the Josephson junctions of the device. The time dependent superconducting phase across the junction produces an electric field that couples to the underlying crystal lattice via the piezoelectric effect. We determine the radiation resistance of the junction due to phonon emission and derive substantial decoherence rates for the quantum bits, which are compatible with quality factors measured in recent experiments.
Abstract The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10 −5 %, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.
Radiation effects in electronic systems have been extensively studied within the context of classical micro- and nano-electronics, enabling reliable operation in space, nuclear, and other harsh environments through well-established concepts such as total ionizing dose, displacement damage, and single-event effects. Superconducting quantum technologies, however, operate in a fundamentally different regime, relying on macroscopic quantum coherence at millikelvin temperatures and energy scales many orders of magnitude smaller than those associated with ionizing radiation. Recent experiments have revealed that even rare radiation events, originating from cosmic rays or natural radioactivity, can generate quasiparticle bursts and non-equilibrium phonons, leading to decoherence and spatially correlated errors across multiple qubits. These phenomena challenge classical notions of radiation hardness and locality that underpin conventional mitigation strategies. This perspective bridges decades of radiation-effects knowledge from classical electronics with emerging insights from superconducting quantum devices, circuits, and qubits. The limitations of directly translating classical radiation-hardness concepts to quantum hardware and examining radiation interactions with superconducting materials and Josephson junctions are highlighted, and the distinct implications for quantum computing vs quantum sensing are discussed. Finally, critical gaps in testing, modeling, and multiscale simulation methodologies are identified, outlining directions toward radiation-aware quantum engineering that integrate materials science, device physics, and system-level design to enable robust, deployable quantum technologies.
For quantum computing to become fault tolerant, the underlying quantum bits must be effectively isolated from the noisy environment. It is well known that including an electromagnetic bandgap around the qubit operating frequency improves coherence for superconducting circuits. However, investigations of bandgaps to other environmental coupling mechanisms remain largely unexplored. Here, we present a method to enhance the coherence of superconducting circuits by introducing a phononic bandgap around the device operating frequency. The phononic bandgaps block resonant decay of defect states within the gapped frequency range, removing the electromagnetic coupling to phonons at the gap frequencies. We construct a multiscale model that derives the decrease in the density of states due to the bandgap and the resulting increase in defect state T1 times. We demonstrate that emission rates from in-plane defect states can be suppressed by up to two orders of magnitude. We combine these simulations with theory for resonators operating in the continuous-wave regime and show that improvements in quality factors are expected by up to the enhancement in defect T1 times. Furthermore, we use full master equation simulation to demonstrate the suppression of qubit energy relaxation even when interacting with 200 defect states. We conclude with an exploration of device implementation including tradeoffs between fabrication complexity and qubit performance.
Abstract Nanomechanical oscillators offer numerous advantages for quantum technologies. Their integration with superconducting qubits shows promise for hardware-efficient quantum error-correction protocols involving superpositions of mechanical coherent states. Limitations of this approach include mechanical decoherence processes, particularly two-level system (TLS) defects, which have been widely studied using classical fields and detectors. In this manuscript, we use a superconducting qubit as a quantum sensor to perform phonon number-resolved measurements on a piezoelectrically coupled phononic crystal cavity. This enables a high-resolution study of mechanical dissipation and dephasing in coherent states of variable size ( nˉ≃1−10 n ¯ ≃ 1 − 10 phonons). We observe nonexponential relaxation and state size-dependent reduction of the dephasing rate, which we attribute to TLS. Using a numerical model, we reproduce the dissipation signatures (and to a lesser extent, the dephasing signatures) via emission into a small ensemble ( N = 5) of rapidly dephasing TLS. Our findings comprise a detailed examination of TLS-induced phonon decoherence in the quantum regime.
Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.
The research work discussed in this thesis deals with the study of superconducting Josephson qubits. Superconducting qubits are solid-state artificial atoms which are based on lithographically defined Josephson tunnel junctions properties. When sufficiently cooled, these superconducting devices exhibit quantized states of charge, flux or junction phase depending on their design parameters. This allows to observe coherent evolutions of their states. The results presented can be divided into two parts. In a first part we investigate operations of superconducting qubits based on the quantum coherence in superconducting quantum interference devices (SQUID). We explain experimental data which has been observed in a SQUID subjected to fast, large-amplitude modifications of its effective potential shape. The motivations for this work come from the fact that in the past few years there have been attempts to interpret the supposed quantum behavior of physical systems, such as Josephson devices, within a classical framework. Moreover, we analyze the possibility of generating GHZ states, namely maximally entangled states, in a quantum system made out of three Josephson qubits. In particular, we investigate the possible limitations of the GHZ state generation due to coupling to bosonic baths. In the second part of the thesis we address a particular cause of decoherence of flux qubits which has been disregarded until now: thermal gradients, which can arise due to accidental non equilibrium quasiparticle distributions. The reason for these detrimental effects is that heat currents flowing through Josephson tunnel junctions in response to a temperature gradient are periodic functions of the phase difference between the electrodes. The phase dependence of the heat current comes from Andreev reflection, namely an interplay between the quasiparticles which carry heat and the superconducting condensate which is sensitive to the superconducting phase difference. Generally speaking, the flux qubit states are characterized by different values of the phase difference through their Josephson junctions. Consequently, the phase-dependent thermal current through a device subject a temperature gradient is related to the phase-dependent qubit states. We study how the thermal currents change according to the state of the qubits hence yielding a measurement of the qubit state. This in turn leads to an impact of temperature gradient on the dynamics of the system. We show that flux qubits in the Delft qubit design can have limitations of the decoherence time to the order of microseconds as a result of this newly discovered source of decoherence. In contrast, the fluxonium qubit is found to be well protected due to its superinductance.