Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2211.07475

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Vijay Jain, Vladislav D. Kurilovich, Yanni D. Dahmani, Chan U Lei, Mason, David, Yoon, Taekwan, Peter T. Rakich, L. I. Glazman, Robert J. Schoelkopf

Published Nov 14, 2022• 0 citations
arXivHTMLPDF

Abstract

Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.

DOI
10.48550/arxiv.2211.07475

Related papers

Acoustic Radiation From a Superconducting Qubit: From Spontaneous Emission to Rabi Oscillations

Vijay Jain, Vladislav D. Kurilovich, Yanni D. Dahmani +6 more

A phonon (quantized vibration of a crystalline medium) is much shorter in wavelength than a photon of the same frequency. This length-scale reduction offers an opportunity to achieve higher density of quantum information storage, and may open a path to scalable implementations of superconducting quantum processors. However, the smallness of the acoustic wavelength also poses a challenge: It may result in fast qubit decoherence via an unintentional emission of phonons. The authors demonstrate how to circumvent such spontaneous emission and attain quantum coherent coupling of a qubit to an isolated phonon mode.

Physical Review Applied•Jul 11, 2023•12 citations

Quartz Mechanical Resonators for Circuit Quantum Acoustics

Emser, Alec L.

Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.

•Apr 17, 2025•0 citations

Quantum acoustics with superconducting qubits

Yiwen Chu, Prashanta Kharel, William H. Renninger +4 more

Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.

arXiv:1703.00342•Science•Sep 22, 2017•487 citations

Interface Piezoelectric Loss in Superconducting Qubits

Haoxin Zhou, Kangdi Yu, Yashwanth Balaji +5 more

Dissipation remains a central obstacle to improving superconducting quantum circuits, yet the microscopic origins of loss in widely used materials platforms are not fully understood. Here, we report the observation of interface piezoelectricity-induced dissipation in superconducting qubits fabricated on high-resistivity silicon. Our devices use a transmon qubit with a shunt capacitor that simultaneously serves as an interdigital transducer embedded in a surface acoustic wave resonator. By tuning the qubit transition into resonance with discrete mechanical modes, we observe up to a factor-of-two reduction in qubit lifetime, consistent with energy exchange between the qubit and mechanical modes mediated by piezoelectric coupling at the aluminum-silicon interface. Our findings provide direct evidence for interface piezoelectricity as a distinct loss channel in superconducting qubits. Combined with multiphysics simulations, these findings suggest that interface piezoelectric loss can dominate over loss from two-level systems at sufficiently high frequencies.

quant-pharXiv:2605.15554•May 18, 2026•0 citations

Loss Mechanisms in High-Coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia-Belles, Alexander Anferov, Lukas Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems. Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 mu s and lifetime-limited coherence times approaching 1 ms in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2 1/4 1.1 & times; 105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

•Jan 1, 2026•0 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•3 citations
Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.
A phonon (quantized vibration of a crystalline medium) is much shorter in wavelength than a photon of the same frequency. This length-scale reduction offers an opportunity to achieve higher density of quantum information storage, and may open a path to scalable implementations of superconducting quantum processors. However, the smallness of the acoustic wavelength also poses a challenge: It may result in fast qubit decoherence via an unintentional emission of phonons. The authors demonstrate how to circumvent such spontaneous emission and attain quantum coherent coupling of a qubit to an isolated phonon mode.
Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.
Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Dissipation remains a central obstacle to improving superconducting quantum circuits, yet the microscopic origins of loss in widely used materials platforms are not fully understood. Here, we report the observation of interface piezoelectricity-induced dissipation in superconducting qubits fabricated on high-resistivity silicon. Our devices use a transmon qubit with a shunt capacitor that simultaneously serves as an interdigital transducer embedded in a surface acoustic wave resonator. By tuning the qubit transition into resonance with discrete mechanical modes, we observe up to a factor-of-two reduction in qubit lifetime, consistent with energy exchange between the qubit and mechanical modes mediated by piezoelectric coupling at the aluminum-silicon interface. Our findings provide direct evidence for interface piezoelectricity as a distinct loss channel in superconducting qubits. Combined with multiphysics simulations, these findings suggest that interface piezoelectric loss can dominate over loss from two-level systems at sufficiently high frequencies.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems. Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 mu s and lifetime-limited coherence times approaching 1 ms in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2 1/4 1.1 & times; 105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.