Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Active chromatic control on the group velocity of light at arbitrary wavelength in benzocyclobutene polymer

Lei Xu, Guoquan Zhang, Ningning Xu, Bo Fang, Feng Gao, Wande Fan, Jingjun Xu, Kar Pong Lor, Kin Seng Chiang

Published Sep 25, 2009• 1 citation
Publisher

Abstract

A novel method is proposed to generate slow and fast lights at arbitrary signal wavelength in benzocyclobutene (BCB) polymer, which eliminates the requirement on the optical nonlinearity or the resonant effect at the signal wavelength with the help of the thermo-optic nonlinear effect induced by a control beam at a different but fixed wavelength. The signal group velocity can be precisely tuned simply by scanning the position of the BCB sample along the light propagation direction. Another advantage is the ability to control chromatically the group velocity of the signal beam by adjusting the control beam in the BCB sample, which, in essence, is to control the refractive index change experienced by the signal beam. This method provides an active chromatic control on the group velocity of light at arbitrary signal wavelength and therefore may have important potential applications in optical communication network and optical information processing.

DOI
10.1364/oe.17.018292

Related papers

Active chromatic control and resonant improvement on the transverse-phase-modulation-induced group delay of light

Bo Fang, Lei Xu, Jie Wang +2 more

In this paper, we reviewed the theoretical and experimental studies on the manipulation of the group delay of light based on the transverse phase modulation effect induced by a Gaussian beam. We introduced the basic theory of slow and fast lights in a thin nonlinear material based on the transverse phase modulation effect. We introduced a simple but effective technique to actively and chromatically control the group velocity of light at arbitrary wavelength, therefore, eliminating the requirements on the optical nonlinearity and the photonic resonance at the signal wavelength. Furthermore, a technique to improve the transverse-modulation-induced relative delay of light in nonlinear media through the combination of an optical nonlinearity and a resonant Fabry-Perot cavity was introduced and theoretically demonstrated in ruby as an example. The introduction of a resonant Fabry-Perot cavity can improve the relative delay by orders of magnitude. The techniques of active chromatic manipulation and resonant improvement of the group delay of light may have potential applications in optical information processing and optical communication network.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2012•0 citations

Governing the speed of a light signal in optical fibers : Brillouin slow and fast light

Sang Hoon Chin

Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.

•Jan 1, 2009•0 citations

Tunable Group Velocity of Light Propagation and Its Application

Yonglan Hou, Chao Peng, Lei Jia +2 more

In this paper, we proposed a novel approach to demonstrate optically controllable pulse group velocity at telecommunication wavelengths in EDF due to CPO. First we reviewed recent advances in slow-light-based optical signal processing, then we study slow and fast light propagation in erbium doped fiber abstractly based on theory and simulation model. It is revealed though the research that the time delay and advancement depends greatly on the pump power, influence of the ion density on the group velocity of light propagation is also studied. Based on our discussion, the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity, which is of great importance to the communication industry.

Symposium on Photonics and Optoelectronics•Aug 1, 2009•0 citations

Governing the speed of light: Recent advances and future perspectives of slow and fast light in microwave-photonics

Marco Santagiustina

The control of the group velocity of optical signals has been widely demonstrated using various optical phenomena and different media. Slow and fast light is achieved in a controllable manner by modifying the refractive index dispersion through light induced modifications of the material or the structural properties of the medium. The potential for a continuous tuning of the phase or time delay of broadband microwave signals modulating the optical carrier opens previously unexplored horizons. The talk will review the recent advancements and the future directions of slow and fast light research with an emphasis on microwave-photonics applications.

International Topical Meeting on Microwave Photonics•Dec 1, 2009•6 citations

Precise control of superluminal and slow light propagation by transverse phase modulation

I. Guedes, L. Misoguti, Sérgio Carlos Zílio

We have used a heterodyne Z-scan technique to produce both superluminal and slow light propagation in media that present either thermal or Kerr nonlinearities. The sample position determines the magnitude and sign of the group velocity and this property was used to control it, with an experimental setup much simpler than those previously reported in similar investigations. The observed effect is attributed to the transverse phase modulation produced by a focused Gaussian beam, and is capable of producing both positive and negative group velocities in the range 1.5 m/s < |upsilon(g)| < c.

Optics Express•Jan 1, 2006•11 citations

Reconfigurable Signal Processing Using Slow-Light-Based Tunable Optical Delay Lines

Jacob B. Khurgin, R.S. Tucker

As a potential enabling technology, slow light has captured much research interest over the past few years for achieving a continuously tunable optical delay line [1]. In principle, slow light is generated by tailoring an enhanced group-index resonance within a given nonlinear medium. This effective refractive index change is experienced by the data stream passing through and thus induces a controllable group delay onto the signal. Themain feature of a slow-light-based optical delay line is the capability for fine-grain temporal manipulation of optical pulses. This fine tunable delay element is envisioned to be useful for various high-bandwidth signal processing functions and applications.

CRC Press eBooks•Oct 8, 2018•0 citations
A novel method is proposed to generate slow and fast lights at arbitrary signal wavelength in benzocyclobutene (BCB) polymer, which eliminates the requirement on the optical nonlinearity or the resonant effect at the signal wavelength with the help of the thermo-optic nonlinear effect induced by a control beam at a different but fixed wavelength. The signal group velocity can be precisely tuned simply by scanning the position of the BCB sample along the light propagation direction. Another advantage is the ability to control chromatically the group velocity of the signal beam by adjusting the control beam in the BCB sample, which, in essence, is to control the refractive index change experienced by the signal beam. This method provides an active chromatic control on the group velocity of light at arbitrary signal wavelength and therefore may have important potential applications in optical communication network and optical information processing.
In this paper, we reviewed the theoretical and experimental studies on the manipulation of the group delay of light based on the transverse phase modulation effect induced by a Gaussian beam. We introduced the basic theory of slow and fast lights in a thin nonlinear material based on the transverse phase modulation effect. We introduced a simple but effective technique to actively and chromatically control the group velocity of light at arbitrary wavelength, therefore, eliminating the requirements on the optical nonlinearity and the photonic resonance at the signal wavelength. Furthermore, a technique to improve the transverse-modulation-induced relative delay of light in nonlinear media through the combination of an optical nonlinearity and a resonant Fabry-Perot cavity was introduced and theoretically demonstrated in ruby as an example. The introduction of a resonant Fabry-Perot cavity can improve the relative delay by orders of magnitude. The techniques of active chromatic manipulation and resonant improvement of the group delay of light may have potential applications in optical information processing and optical communication network.
Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.
In this paper, we proposed a novel approach to demonstrate optically controllable pulse group velocity at telecommunication wavelengths in EDF due to CPO. First we reviewed recent advances in slow-light-based optical signal processing, then we study slow and fast light propagation in erbium doped fiber abstractly based on theory and simulation model. It is revealed though the research that the time delay and advancement depends greatly on the pump power, influence of the ion density on the group velocity of light propagation is also studied. Based on our discussion, the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity, which is of great importance to the communication industry.
The control of the group velocity of optical signals has been widely demonstrated using various optical phenomena and different media. Slow and fast light is achieved in a controllable manner by modifying the refractive index dispersion through light induced modifications of the material or the structural properties of the medium. The potential for a continuous tuning of the phase or time delay of broadband microwave signals modulating the optical carrier opens previously unexplored horizons. The talk will review the recent advancements and the future directions of slow and fast light research with an emphasis on microwave-photonics applications.
We have used a heterodyne Z-scan technique to produce both superluminal and slow light propagation in media that present either thermal or Kerr nonlinearities. The sample position determines the magnitude and sign of the group velocity and this property was used to control it, with an experimental setup much simpler than those previously reported in similar investigations. The observed effect is attributed to the transverse phase modulation produced by a focused Gaussian beam, and is capable of producing both positive and negative group velocities in the range 1.5 m/s < |upsilon(g)| < c.
As a potential enabling technology, slow light has captured much research interest over the past few years for achieving a continuously tunable optical delay line [1]. In principle, slow light is generated by tailoring an enhanced group-index resonance within a given nonlinear medium. This effective refractive index change is experienced by the data stream passing through and thus induces a controllable group delay onto the signal. Themain feature of a slow-light-based optical delay line is the capability for fine-grain temporal manipulation of optical pulses. This fine tunable delay element is envisioned to be useful for various high-bandwidth signal processing functions and applications.