Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Designing neutral-atom nanotraps with integrated optical waveguides

James P. Burke, Sai-Tak Chu, Garnett W. Bryant, Carl J. Williams, Paul S. Julienne

Published Apr 4, 2002• 56 citations
Publisher

Abstract

Integrated optical structures offer the intriguing potential of compact, reproducible waveguide arrays, rings, Y junctions, etc., that could be used to design evanescent field traps to transport, store, and interact atoms in networks as complicated as any integrated optical waveguide circuit. We theoretically investigate three approaches to trapping atoms above linear integrated optical waveguides. A two-color scheme balances the decaying evanescent fields of red- and blue-detuned light to produce a potential minimum above the guide. A one-color surface trap proposal uses blue-detuned light and the attractive surface interaction to provide a potential minimum. A third proposal uses blue-detuned light in two guides positioned above and below one another. The atoms are confined to the ``dark'' spot in the vacuum gap between the guides. We find that all three approaches can be used to trap atoms in two or three dimensions with approximately 100 mW of laser power. We show that the dark spot guide is robust to light scatter and provides the most viable approach for constructing integrated optical circuits that could be used to transport and manipulate atoms in a controlled manner.

DOI
10.1103/physreva.65.043411

Related papers

Trapping atoms with evanescent light fields from integrated optical waveguides

James P. Burke, Jr., Sai T. Chu, Garnett W. Bryant +2 more

We theoretically investigate three approaches to trapping atoms above linear integrated optical waveguides. A two- color scheme balances the decaying evanescent elds of red- and blue-detuned light to produce a potential minimum above the guide. A one-color surface trap proposal uses blue-detuned light and the attractive surface interaction to provide a potential minimum. A third proposal uses blue-detuned light in two guides positioned above and below one another. The atoms are con ned to the \dark" spot in the vacuum gap between the guides. We nd that all three approaches can be used in principle to trap atoms in two- or three-dimensions with a few 10's of mW of laser power. Of these three methods, we show that the dark spot guide is the most robust to power fluctuations and provides the most viable design approach to constructing integrated optical circuits that could transport and manipulate atoms in a controlled manner.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 12, 2001•0 citations

Trapping atoms in the evanescent field of laser written wave guides

Dario Jukić, Amir Moqanaki, Philip John Walther +3 more

We analyze evanescent fields of laser written waveguides and show that they can be used to trap atoms close to the surface of an integrated optical atom chip. In contrast to subwavelength nanofibres it is generally not possible to create a stable trapping potential using only the fundamental modes. This is why we create a stable trapping potential by using two different laser colors, such that the waveguide supports two modes for the blue detuned laser, while for the red detuned light the waveguide has only a single mode. In particular, we study such a two-color trap for Cesium atoms, and calculate both the potential and losses for the set of parameters that are within experimental reach. We also optimize system parameters in order to minimize trap losses due to photon scattering and tunneling to the surface.

arXiv:1605.00332•May 2, 2016•0 citations

Integrated optical dipole trap for cold neutral atoms with an optical waveguide coupler

J Lee, D H Park, S Mittal +2 more

An integrated optical dipole trap uses two-color (red and blue-detuned) traveling evanescent wave fields for trapping cold neutral atoms. To achieve longitudinal confinement, we propose using an integrated optical waveguide coupler, which provides a potential gradient along the beam propagation direction sufficient to confine atoms. This integrated optical dipole trap can support an atomic ensemble with a large optical depth due to its small mode area. Its quasi- TE 0 waveguide mode has an advantage over the HE 11 mode of a nanofiber, with little inhomogeneous Zeeman broadening at the trapping region. The longitudinal confinement eliminates the need for a one dimensional optical lattice, reducing collisional blockaded atomic loading, potentially producing larger ensembles. The waveguide trap allows for scalability and integrability with nano-fabrication technology. We analyze the potential performance of such integrated atom traps.

arXiv:1303.2922•New Journal of Physics•Apr 9, 2013•24 citations

Trapping and manipulating atoms with guided evanescent fields

John Robert Burke, Sai-Tak Chu, Garnett W. Bryant +3 more

Summary form only given. Electromagnetic fields have been used extensively to manipulate and control atoms. Intersecting light beams are used to create standing waves that act as an optical lattice potential. Evanescent fields at a surface can be used as a mirror to reflect atoms scattering on the surface. Atoms can propagate inside a hollow core fiber provided that an evanescent surface field keeps the atoms away from the inner wall. These fields are used to move and locate atoms so that they can interact, interfere, and entangle. We have been examining the two color scheme with realistic integrated optical waveguide structures. In this presentation, we show that two-dimensional and three-dimensional trapping configurations can be achieved for real waveguide structures. We discuss the design features that must be addressed to implement optical structures for use in atom optics.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•1 citation

Atom trap and waveguide using a two-color evanescent light field around a subwavelength-diameter optical fiber

Fam Le Kien, V. I. Balykin, K. Hakuta

We suggest using a two-color evanescent light field around a subwavelength-diameter fiber to trap and guide atoms. The optical fiber carries a red-detuned light and a blue-detuned light, with both modes far from resonance. When both input light fields are circularly polarized, a set of trapping minima of the total potential in the transverse plane is formed as a ring around the fiber. This design allows confinement of atoms to a cylindrical shell around the fiber. When one or both of the input light fields are linearly polarized, the total potential has two local minimum points in the transverse plane. This design allows confinement of atoms to two straight lines parallel to the fiber axis. Due to the small thickness of the fiber, we can use far-off-resonance fields with substantially differing evanescent decay lengths to produce a net potential with a large depth, a large coherence time, and a large trap lifetime. For example, a 0.2-\ensuremath{\mu}m-radius silica fiber carrying 30 mW of 1.06-\ensuremath{\mu}m-wavelength light and 29 mW of 700-nm-wavelength light, both fields circularly polarized at the input, gives for cesium atoms a trap depth of 2.9 mK, a coherence time of 32 ms, and a recoil-heating-limited trap lifetime of 541 s.

arXiv:quant-ph/0407107•Physical Review A•Dec 7, 2004•264 citations

Substrate-based atom waveguide using guided two-color evanescent light fields

Alex H. Barnett, Steven P. Smith, Maxim Olshanii +3 more

We propose a dipole-force linear waveguide which confines neutral atoms up to $\ensuremath{\lambda}/2$ above a microfabricated single-mode dielectric optical guide. The optical guide carries far blue-detuned light in the horizontally-polarized TE mode and far red-detuned light in the vertically-polarized TM mode, with both modes close to optical cut-off. A trapping minimum in the transverse plane is formed above the optical guide due to the differing evanescent decay lengths of the two modes. This design allows manufacture of mechanically stable atom-optical elements on a substrate. We calculate the full vector bound modes for an arbitrary guide shape using two-dimensional non-uniform finite elements in the frequency-domain, allowing us to optimize atom waveguide properties. We find that a rectangular optical guide of $0.8\ensuremath{\mu}\mathrm{m}$ by $0.2\ensuremath{\mu}\mathrm{m}$ carrying 6 mW of total laser power (detuning $\ifmmode\pm\else\textpm\fi{}15\mathrm{nm}$ about the $D2$ line) gives a trap depth of $200\ensuremath{\mu}\mathrm{K}$ for cesium atoms ${(m}_{F}=0),$ transverse oscillation frequencies of ${f}_{x}=40\mathrm{kHz}$ and ${f}_{y}=160\mathrm{kHz},$ collection area $\ensuremath{\sim}1\ensuremath{\mu}{\mathrm{m}}^{2}$ and coherence time of 9 ms. We discuss the effects of non-zero ${m}_{F},$ the $D1$ line, surface interactions, heating rate, the substrate refractive index, and the limits on waveguide bending radius.

arXiv:physics/9907014•Physical Review A•Jan 18, 2000•50 citations
Integrated optical structures offer the intriguing potential of compact, reproducible waveguide arrays, rings, Y junctions, etc., that could be used to design evanescent field traps to transport, store, and interact atoms in networks as complicated as any integrated optical waveguide circuit. We theoretically investigate three approaches to trapping atoms above linear integrated optical waveguides. A two-color scheme balances the decaying evanescent fields of red- and blue-detuned light to produce a potential minimum above the guide. A one-color surface trap proposal uses blue-detuned light and the attractive surface interaction to provide a potential minimum. A third proposal uses blue-detuned light in two guides positioned above and below one another. The atoms are confined to the ``dark'' spot in the vacuum gap between the guides. We find that all three approaches can be used to trap atoms in two or three dimensions with approximately 100 mW of laser power. We show that the dark spot guide is robust to light scatter and provides the most viable approach for constructing integrated optical circuits that could be used to transport and manipulate atoms in a controlled manner.
We theoretically investigate three approaches to trapping atoms above linear integrated optical waveguides. A two- color scheme balances the decaying evanescent elds of red- and blue-detuned light to produce a potential minimum above the guide. A one-color surface trap proposal uses blue-detuned light and the attractive surface interaction to provide a potential minimum. A third proposal uses blue-detuned light in two guides positioned above and below one another. The atoms are con ned to the \dark" spot in the vacuum gap between the guides. We nd that all three approaches can be used in principle to trap atoms in two- or three-dimensions with a few 10's of mW of laser power. Of these three methods, we show that the dark spot guide is the most robust to power fluctuations and provides the most viable design approach to constructing integrated optical circuits that could transport and manipulate atoms in a controlled manner.
We analyze evanescent fields of laser written waveguides and show that they can be used to trap atoms close to the surface of an integrated optical atom chip. In contrast to subwavelength nanofibres it is generally not possible to create a stable trapping potential using only the fundamental modes. This is why we create a stable trapping potential by using two different laser colors, such that the waveguide supports two modes for the blue detuned laser, while for the red detuned light the waveguide has only a single mode. In particular, we study such a two-color trap for Cesium atoms, and calculate both the potential and losses for the set of parameters that are within experimental reach. We also optimize system parameters in order to minimize trap losses due to photon scattering and tunneling to the surface.
An integrated optical dipole trap uses two-color (red and blue-detuned) traveling evanescent wave fields for trapping cold neutral atoms. To achieve longitudinal confinement, we propose using an integrated optical waveguide coupler, which provides a potential gradient along the beam propagation direction sufficient to confine atoms. This integrated optical dipole trap can support an atomic ensemble with a large optical depth due to its small mode area. Its quasi- TE 0 waveguide mode has an advantage over the HE 11 mode of a nanofiber, with little inhomogeneous Zeeman broadening at the trapping region. The longitudinal confinement eliminates the need for a one dimensional optical lattice, reducing collisional blockaded atomic loading, potentially producing larger ensembles. The waveguide trap allows for scalability and integrability with nano-fabrication technology. We analyze the potential performance of such integrated atom traps.
Summary form only given. Electromagnetic fields have been used extensively to manipulate and control atoms. Intersecting light beams are used to create standing waves that act as an optical lattice potential. Evanescent fields at a surface can be used as a mirror to reflect atoms scattering on the surface. Atoms can propagate inside a hollow core fiber provided that an evanescent surface field keeps the atoms away from the inner wall. These fields are used to move and locate atoms so that they can interact, interfere, and entangle. We have been examining the two color scheme with realistic integrated optical waveguide structures. In this presentation, we show that two-dimensional and three-dimensional trapping configurations can be achieved for real waveguide structures. We discuss the design features that must be addressed to implement optical structures for use in atom optics.
We suggest using a two-color evanescent light field around a subwavelength-diameter fiber to trap and guide atoms. The optical fiber carries a red-detuned light and a blue-detuned light, with both modes far from resonance. When both input light fields are circularly polarized, a set of trapping minima of the total potential in the transverse plane is formed as a ring around the fiber. This design allows confinement of atoms to a cylindrical shell around the fiber. When one or both of the input light fields are linearly polarized, the total potential has two local minimum points in the transverse plane. This design allows confinement of atoms to two straight lines parallel to the fiber axis. Due to the small thickness of the fiber, we can use far-off-resonance fields with substantially differing evanescent decay lengths to produce a net potential with a large depth, a large coherence time, and a large trap lifetime. For example, a 0.2-\ensuremath{\mu}m-radius silica fiber carrying 30 mW of 1.06-\ensuremath{\mu}m-wavelength light and 29 mW of 700-nm-wavelength light, both fields circularly polarized at the input, gives for cesium atoms a trap depth of 2.9 mK, a coherence time of 32 ms, and a recoil-heating-limited trap lifetime of 541 s.
We propose a dipole-force linear waveguide which confines neutral atoms up to $\ensuremath{\lambda}/2$ above a microfabricated single-mode dielectric optical guide. The optical guide carries far blue-detuned light in the horizontally-polarized TE mode and far red-detuned light in the vertically-polarized TM mode, with both modes close to optical cut-off. A trapping minimum in the transverse plane is formed above the optical guide due to the differing evanescent decay lengths of the two modes. This design allows manufacture of mechanically stable atom-optical elements on a substrate. We calculate the full vector bound modes for an arbitrary guide shape using two-dimensional non-uniform finite elements in the frequency-domain, allowing us to optimize atom waveguide properties. We find that a rectangular optical guide of $0.8\ensuremath{\mu}\mathrm{m}$ by $0.2\ensuremath{\mu}\mathrm{m}$ carrying 6 mW of total laser power (detuning $\ifmmode\pm\else\textpm\fi{}15\mathrm{nm}$ about the D2D2D2 line) gives a trap depth of $200\ensuremath{\mu}\mathrm{K}$ for cesium atoms (mF=0),{(m}_{F}=0),(mF​=0), transverse oscillation frequencies of fx=40kHz{f}_{x}=40\mathrm{kHz}fx​=40kHz and fy=160kHz,{f}_{y}=160\mathrm{kHz},fy​=160kHz, collection area $\ensuremath{\sim}1\ensuremath{\mu}{\mathrm{m}}^{2}$ and coherence time of 9 ms. We discuss the effects of non-zero mF,{m}_{F},mF​, the D1D1D1 line, surface interactions, heating rate, the substrate refractive index, and the limits on waveguide bending radius.