Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Slow light based on stimulated Raman scattering in an integrated liquid-core optical fiber filled with CS_2

Oscar D. Herrera, L. Schneebeli, Khanh Quoc Kieu, Robert A. Norwood, Nasser N. Peyghambarian

Published Apr 3, 2013• 24 citations
Publisher

Abstract

We demonstrate a fiber-based slow light system using a carbon disulfide (CS2)) filled integrated liquid-core optical fiber (i-LCOF). Using 1 meter of i-LCOF we were able to delay 18ps pulses up to 34ps; a delay of 188% of the pulse width. This experimental setup serves as a foundation for slow-light experiments in other nonlinear liquids. Numerical simulations of pulse-propagation equations confirmed the observed delay and a simplified method is presented that can be applied to calculate induced delay for non-cw Stokes pulses. The system is all-fiber and compact with delays greater than a pulse width, indicating potential application as an ultrafast controllable delay line for time division multiplexing in multiGb/s telecommunication systems.

DOI
10.1364/oe.21.008821

Related papers

Tunable all-optical delays via Brillouin slow light in an optical fiber

Yoshitomo Okawachi, Jay E. Sharping, Alexander L. Gaeta +5 more

We have demonstrated that stimulated Brillouin scattering can be used to generate all-optical slow-light pulse delays of greater than a pulse length for pulses as short as 16 ns in a single-mode fiber. Since the induced delay is generated for wavelengths detuned from the pump field by the Brillouin frequency, tuning near an electronic resonance of the material is not required and thus delays can be induced at telecommunication wavelengths. This represents a significant improvement over previous demonstrations of slow light in solids and is an important step towards developing an all-optical tunable delay line for telecommunications. In addition, these results strongly suggest that analogous delays can be achieved using stimulated Raman scattering at telecommunication data rates.

Conference on Lasers and Electro-Optics•Jan 1, 2005•76 citations

Slow light generation using SBS in a liquid-core photonic crystal fiber

Wenbin An, Haiming Jiang, Yinjia Fang +3 more

Based on stimulated Brillouin scattering (SBS), the slow light effect in photonic crystal fibre (PCF), which is filled with highly nonlinear liquid-carbon disuphide in the core region, is investigated. Maximum allowable pump power for undistorted output pulse, minimum value of pump power required to initiate the SBS effect, Brillouin gain and time-tonic delay experienced by the pulse in the designed liquid-core photonic crystal fibre, are all calculated numerically. We have found that the maximum time-delay up to ∼134.4 ns at 1.064 μm can be obtained using 1 m long liquid-core PCF pumped with only 65.8 mW, which is lower than the value reported in the literature for achieving such a high delay time. The results indicate that liquid-core PCF is capable of generating tunable time-delay that is adjusted by the pump power and structural parameters of the proposed liquid-core PCF.

Journal of Modern Optics•Nov 11, 2016•4 citations

Numerical study of all-optical slow-light delays via stimulated Brillouin scattering in an optical fiber

Zhaoming Zhu, Daniel J. Gauthier, Yoshitomo Okawachi +4 more

We study numerically all-optical slow-light delays in room-temperature single-mode optical fibers induced by stimulated Brillouin scattering. We consider the propagation of a pulse through a cw-pumped Brillouin fiber amplifier, where the carrier frequency of the pulse is tuned near the Stokes resonance. Pulse delay and broadening of the Stokes pulse are studied in the small-signal and gain-saturation regimes. Pulse delay is shown to be limited by saturation of the Brillouin amplifier. In the small-signal regime, both time delay and pulse broadening increase with increasing gain. In the gain-saturation regime, both time delay and broadening decrease with increasing gain, and the pulse even achieves advancement. Time delay of more than one pulse-width is observed with modest pulse distortion, and over one pulse-width advancement can be obtained with larger pulse distortion in the gain-saturation regime.

Journal of the Optical Society of America B•Nov 1, 2005•150 citations

Slow light based on stimulated Brillouin scattering in microstructured fiber

Wei Wei, Xia Zhang, Hui Yu +6 more

All-optical tunable slow light technology has promising applications in all-optical network and optical information process. Tunable slow light based on stimulated Brillouin scattering is experimentally investigated, using highly nonlinear microstructured fiber which is designed and drawn by ourselves. The experiment setup is composed of single pump and a single-stage delay. When the pump power reaches 162.6 mW, a maximum delay of 76 ns, equal to 0.76 pulse width, is achieved in the highly nonlinear microstructured fiber of 120 m in length. In addition, by adjusting the pump power, the tunable slow light can be realized. This scheme of slow light has advantages such as large delay, being all-optical tunable and compatible with optical communications systems.

Acta Physica Sinica•Jan 1, 2013•5 citations

Tuning of group delay with stimulated Raman scattering-induced dispersion in gas-filled optical fiber

Haihong Bao, Wei Jin, Hoi Lut Ho

We report the first demonstration of group delay tuning with stimulated Raman scattering-induced dispersion in a hydrogen-filled hollow-core optical fiber.A pump laser induces a sharp refractive index change near the S 0 (0) Raman transition of hydrogen molecules, enabling the control of the group velocity of signal pulses around the Stokes wavelength.Experiments with an 80-m-long hollow-core fiber filled with 2.5 bar hydrogen achieved continuous tuning of the pulse delay up to 1.42 ns by varying the Raman amplification from 0 to 10 dB.The tunable pulse delay is realized by changing the pump power as well as the hydrogen pressure.This work provides a new technique for controlling the pulse propagation in optical fibers with high flexibility.

Chinese Optics Letters•Jan 1, 2020•3 citations

Slow light in room-temperature optical waveguides

Daniel J. Gauthier

Researchers studying slow light via stimulated Brillouin scattering have demonstrated that it is possible to minimize pulse distortion by tailoring the higher-order dispersion of the material, operate at data rates over 10 Gb/s using broad-band pump light, obtain controllable delays exceeding one pulse width, and delaying pulses with minimal change in the pulse amplitude. Spurred by this work, there is active research in obtaining slow light in optical wave guides by stimulated Raman scattering and by the four-wave mixing process. Also, researchers are moving into the nonlinear regime to study slow-light with optical solitons. Simultaneously, results from the basic science laboratories are transitioning to applications-oriented laboratories who are integrating slow-light sub-assemblies into functions telecommunication components.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2007•0 citations
We demonstrate a fiber-based slow light system using a carbon disulfide (CS2)) filled integrated liquid-core optical fiber (i-LCOF). Using 1 meter of i-LCOF we were able to delay 18ps pulses up to 34ps; a delay of 188% of the pulse width. This experimental setup serves as a foundation for slow-light experiments in other nonlinear liquids. Numerical simulations of pulse-propagation equations confirmed the observed delay and a simplified method is presented that can be applied to calculate induced delay for non-cw Stokes pulses. The system is all-fiber and compact with delays greater than a pulse width, indicating potential application as an ultrafast controllable delay line for time division multiplexing in multiGb/s telecommunication systems.
We have demonstrated that stimulated Brillouin scattering can be used to generate all-optical slow-light pulse delays of greater than a pulse length for pulses as short as 16 ns in a single-mode fiber. Since the induced delay is generated for wavelengths detuned from the pump field by the Brillouin frequency, tuning near an electronic resonance of the material is not required and thus delays can be induced at telecommunication wavelengths. This represents a significant improvement over previous demonstrations of slow light in solids and is an important step towards developing an all-optical tunable delay line for telecommunications. In addition, these results strongly suggest that analogous delays can be achieved using stimulated Raman scattering at telecommunication data rates.
Based on stimulated Brillouin scattering (SBS), the slow light effect in photonic crystal fibre (PCF), which is filled with highly nonlinear liquid-carbon disuphide in the core region, is investigated. Maximum allowable pump power for undistorted output pulse, minimum value of pump power required to initiate the SBS effect, Brillouin gain and time-tonic delay experienced by the pulse in the designed liquid-core photonic crystal fibre, are all calculated numerically. We have found that the maximum time-delay up to ∼134.4 ns at 1.064 μm can be obtained using 1 m long liquid-core PCF pumped with only 65.8 mW, which is lower than the value reported in the literature for achieving such a high delay time. The results indicate that liquid-core PCF is capable of generating tunable time-delay that is adjusted by the pump power and structural parameters of the proposed liquid-core PCF.
We study numerically all-optical slow-light delays in room-temperature single-mode optical fibers induced by stimulated Brillouin scattering. We consider the propagation of a pulse through a cw-pumped Brillouin fiber amplifier, where the carrier frequency of the pulse is tuned near the Stokes resonance. Pulse delay and broadening of the Stokes pulse are studied in the small-signal and gain-saturation regimes. Pulse delay is shown to be limited by saturation of the Brillouin amplifier. In the small-signal regime, both time delay and pulse broadening increase with increasing gain. In the gain-saturation regime, both time delay and broadening decrease with increasing gain, and the pulse even achieves advancement. Time delay of more than one pulse-width is observed with modest pulse distortion, and over one pulse-width advancement can be obtained with larger pulse distortion in the gain-saturation regime.
All-optical tunable slow light technology has promising applications in all-optical network and optical information process. Tunable slow light based on stimulated Brillouin scattering is experimentally investigated, using highly nonlinear microstructured fiber which is designed and drawn by ourselves. The experiment setup is composed of single pump and a single-stage delay. When the pump power reaches 162.6 mW, a maximum delay of 76 ns, equal to 0.76 pulse width, is achieved in the highly nonlinear microstructured fiber of 120 m in length. In addition, by adjusting the pump power, the tunable slow light can be realized. This scheme of slow light has advantages such as large delay, being all-optical tunable and compatible with optical communications systems.
We report the first demonstration of group delay tuning with stimulated Raman scattering-induced dispersion in a hydrogen-filled hollow-core optical fiber.A pump laser induces a sharp refractive index change near the S 0 (0) Raman transition of hydrogen molecules, enabling the control of the group velocity of signal pulses around the Stokes wavelength.Experiments with an 80-m-long hollow-core fiber filled with 2.5 bar hydrogen achieved continuous tuning of the pulse delay up to 1.42 ns by varying the Raman amplification from 0 to 10 dB.The tunable pulse delay is realized by changing the pump power as well as the hydrogen pressure.This work provides a new technique for controlling the pulse propagation in optical fibers with high flexibility.
Researchers studying slow light via stimulated Brillouin scattering have demonstrated that it is possible to minimize pulse distortion by tailoring the higher-order dispersion of the material, operate at data rates over 10 Gb/s using broad-band pump light, obtain controllable delays exceeding one pulse width, and delaying pulses with minimal change in the pulse amplitude. Spurred by this work, there is active research in obtaining slow light in optical wave guides by stimulated Raman scattering and by the four-wave mixing process. Also, researchers are moving into the nonlinear regime to study slow-light with optical solitons. Simultaneously, results from the basic science laboratories are transitioning to applications-oriented laboratories who are integrating slow-light sub-assemblies into functions telecommunication components.