The effect of varying parameters specific to laser pulse shaping instruments on resulting fidelities for the ACNOT(1), NOT(2), and Hadamard(2) quantum logic gates are studied for the diatomic molecule (12)C(16)O. These parameters include varying the frequency resolution, adjusting the number of frequency components and also varying the amplitude and phase at each frequency component. A time domain analytic form of the original discretized frequency domain laser pulse function is derived, providing a useful means to infer the resulting pulse shape through variations to the aforementioned parameters. We show that amplitude variation at each frequency component is a crucial requirement for optimal laser pulse shaping, whereas phase variation provides minimal contribution. We also show that high fidelity laser pulses are dependent upon the frequency resolution and increasing the number of frequency components provides only a small incremental improvement to quantum gate fidelity. Analysis through use of the pulse area theorem confirms the resulting population dynamics for one or two frequency high fidelity laser pulses and implies similar dynamics for more complex laser pulse shapes. The ability to produce high fidelity laser pulses that provide both population control and global phase alignment is attributed greatly to the natural evolution phase alignment of the qubits involved within the quantum logic gate operation.
The effect of varying parameters specific to laser pulse shaping instruments on resulting fidelities for the ACNOT(1), NOT(2), and Hadamard(2) quantum logic gates are studied for the diatomic molecule (12)C(16)O. These parameters include varying the frequency resolution, adjusting the number of frequency components and also varying the amplitude and phase at each frequency component. A time domain analytic form of the original discretized frequency domain laser pulse function is derived, providing a useful means to infer the resulting pulse shape through variations to the aforementioned parameters. We show that amplitude variation at each frequency component is a crucial requirement for optimal laser pulse shaping, whereas phase variation provides minimal contribution. We also show that high fidelity laser pulses are dependent upon the frequency resolution and increasing the number of frequency components provides only a small incremental improvement to quantum gate fidelity. Analysis through use of the pulse area theorem confirms the resulting population dynamics for one or two frequency high fidelity laser pulses and implies similar dynamics for more complex laser pulse shapes. The ability to produce high fidelity laser pulses that provide both population control and global phase alignment is attributed greatly to the natural evolution phase alignment of the qubits involved within the quantum logic gate operation.
The intent of this study is to determine the feasibility of diatomics as molecular quantum computing candidates and shed insight into the use of such experimental laser pulse shaping methods to represent quantum logic gates. Four appropriate rovibrational states of model diatomic molecules are encoded as the qubit states. A set of 2-qubit quantum logic gates (ACNOT, CNOT, NOT, Hadamard) are represented by amplitude and phase shaped laser pulses. The combinations of amplitudes and phases that produce the optimal laser pulse representation, for each quantum logic gate, are determined by a Genetic Algorithm optimization routine. The theoretical laser pulse shaping is analogous to current experimental frequency-domain pulse shaping apparatus with amplitude and phase control at individual frequencies. A model set of diatomics is sampled in order to determine a relationship between optimal laser pulse shaping and the choice of diatomic molecule. We show that the choice of diatomic molecule greatly influences the ability to produce optimal laser pulse shapes to represent quantum logic gates. Tuneable parameters specific to laser pulse shaping instruments are varied to determine their effect on optimal pulse production. They include varying the number of amplitude and phase components, adjusting the number of frequency components, and altering the frequency resolution which is synonymous with altering the laser pulse duration. A time domain analytic form of the original frequency domain laser pulse function is derived, providing a useful means to infer the laser pulse dependencies on these parameters. Initially, we show that the appropriate choice of rovibrational state qubits of carbon monoxide (12C16O) and the use of simple shaped binary pulses, 2 amplitude and 2 phase components, can provide significant control for specific quantum gates. Further amplitude variation at each frequency component is shown to be a crucial requirement for optimal laser pulse shaping, whereas phase variation provides minimal contribution. We show that the generation of optimal laser pulse shapes is highly dependent upon the frequency resolution and increasing the number of frequency components provides incremental improvements to optimal laser pulses.
The importance of the ro-vibrational state energies on the ability to produce high fidelity binary shaped laser pulses for quantum logic gates is investigated. The single frequency 2-qubit ACNOT(1) and double frequency 2-qubit NOT(2) quantum gates are used as test cases to examine this behaviour. A range of diatomics is sampled. The laser pulses are optimized using a genetic algorithm for binary (two amplitude and two phase parameter) variation on a discretized frequency spectrum. The resulting trends in the fidelities were attributed to the intrinsic molecular properties and not the choice of method: a discretized frequency spectrum with genetic algorithm optimization. This is verified by using other common laser pulse optimization methods (including iterative optimal control theory), which result in the same qualitative trends in fidelity. The results differ from other studies that used vibrational state energies only. Moreover, appropriate choice of diatomic (relative ro-vibrational state arrangement) is critical for producing high fidelity optimized quantum logic gates. It is also suggested that global phase alignment imposes a significant restriction on obtaining high fidelity regions within the parameter search space. Overall, this indicates a complexity in the ability to provide appropriate binary laser pulse control of diatomics for molecular quantum computing.
Frequency domain shaped binary laser pulses were optimized to perform 2 qubit quantum gate operations in (12)C(16)O. The qubit rovibrational state representation was chosen so that all gate operations consisted of one-photon transitions. The amplitude and phase varied binary pulses were determined using a genetic algorithm optimization routine. Binary pulses have two possible amplitudes, 0 or 1, and two phases, 0 or pi, for each frequency component of the pulse. Binary pulses are the simplest to shape experimentally and provide a minimum fidelity limit for amplitude and phase shaped pulses. With the current choice of qubit representation and using optimized binary pulses, fidelities of 0.80 and as high as 0.97 were achieved for the controlled-NOT and alternative controlled-NOT quantum gates. This indicates that with a judicious choice of qubits, most of the required control can be obtained with a binary pulse. Limited control was observed for 2 qubit NOT and Hadamard gates due to the need to control multiple excitations. The current choice of qubit representation produces pulses with decreased energies and superior fidelities when compared with rovibrational qubit representations consisting of two-photon transitions. The choice of input pulse energy is important and applying pulses of increased energy does not necessarily lead to a better fidelity.
In the context of molecular quantum computation the optimal control theory (OCT) is used to obtain shaped laser pulses for high-fidelity control of vibrational qubits. Optimization is done in time domain and the OCT algorithm varies values of electric field in each time step independently, tuning hundreds of thousands of parameters to find one optimal solution. Such flexibility is not available in experiments, where pulse shaping is done in frequency domain and the number of "tuning knobs" is much smaller. The question of possible experimental interpretations of theoretically found OCT solutions arises. In this work we analyze very accurate optimal pulse that we obtained for implementing quantum gate CNOT for the two-qubit system encoded into the exited vibrational states of thiophosgene molecule. Next, we try to alter this pulse by reducing the number of available frequency channels and intentionally introducing systematic and random errors (in frequency domain, by modifying the values of amplitudes and phases of different frequency components). We conclude that a very limited number of frequency components (only 32 in the model of thiophosgene) are really necessary for accurate control of the vibrational two-qubit system, and such pulses can be readily constructed using OCT. If the amplitude and phase errors of different frequency components do not exceed ±3% of the optimal values, one can still achieve accurate transformations of the vibrational two-qubit system, with gate fidelity of CNOT exceeding 0.99.
In a recent paper [D. Babikov, J. Chem. Phys. 121, 7577 (2004)], quantum optimal control theory was applied to analyze the accuracy of quantum gates in a quantum computer based on molecular vibrational eigenstates. The effects of the anharmonicity parameter of the molecule, the target time of the pulse, and the penalty function on the accuracy of the qubit transformations were investigated. We demonstrate that the effects of all the molecular and laser-pulse parameters can be explained utilizing the analytical pulse area theorem, which originates from the standard two-level model. Moreover, by analyzing the difference between the optimal control theory results and those obtained using the pulse area theorem, it is shown that extremely high quantum gate fidelity can be achieved for a qubit system based on vibrational eigenstates.
Electron spins trapped in quantum dots have recently proven to be a promising technology for the implementation of qubits, already demonstrating high fidelity single- and two-qubits gates. The next step towards fault-tolerant quantum computing is to increase the number of so-called spin qubits on the processor. However, this poses several challenges, one of which being how to implement single-qubit gates in multi-qubit systems, with high fidelity. This work focused on two aspects. The first one was to identify the physical phenomena and limitations that hinder the realisation of high fidelity single-qubit gates in multi-qubit environments. The second objective was to investigate, implement and optimise methods in order to minimise the impact of these perturbing phenomena. The identified perturbing effects include unwanted driving between a pulse and the neighbouring qubits, as well as frequency shifts induced by drive-spin coupling and non-ideal pulse in experimental setups. Crosstalk was addressed using pulse shaping (i.e. amplitude or phase modulation of the driving pulse to tailor its spectral characteristics and reduce the energy transmitted at unwanted frequencies). The performance of shapes taken from both NMR and signal processing literature was investigated, for various pulse parameters, through an extensive grid search. In addition, a frequency correction algorithm was devised: off-resonant drive frequencies are selected so that the shifted qubits are resonantly driven. It currently accounts for two phenomena: the AC Stark and Bloch-Siegert shifts. The algorithm furthermore tracks the changes caused by the time-dependent characteristics of the shaped pulses. The proposed frequency correction algorithm was shown to almost entirely negate the effects of the considered shifts, leading to unitary fidelity improvements by up to 55%. In addition, pulse shaping was demonstrated to noticeably improve the fidelity of simultaneous single-qubit rotations compared to unshaped driving. Rotations with fidelities as high as 99.98% were obtained for pi/2 rotations on two-qubits systems. Moreover, shapes whose Fourier transform is narrow and sharp, associated with low Rabi frequencies, were demonstrated to generally provide the highest fidelities of the tested configurations. Lastly, the trends and guidelines highlighted by these results were shown to scale to systems with larger numbers of qubits. The correction techniques investigated in this work have proven promising for the implementation of high fidelity single-qubit gates in multi-qubit systems. In particular, the guidelines for selecting a well-performing pulse shape should also be useful for the design of optimised driving schemes, regardless of the number of qubits involved. Additionally, the proposed frequency shift correction algorithm is expected to be able to handle arbitrary shifts, and so to be easily adaptable to use in experiments.