Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

High power rapidly tunable system for laser cooling

Victor Manuel Valenzuela, L. Hernández, E. Gómez

Published Jan 1, 2012• 13 citations
Publisher

Abstract

We present a laser configuration capable of fast frequency changes with a high power output and a large tuning range. The system integrates frequency tuning with an acousto-optic modulator with a double pass tapered amplifier. A compensation circuit keeps the seed power constant and prevents damage to the amplifier. A single mode fiber decouples the modulation and amplification sections and keeps the alignment fixed. The small power required to saturate the amplifier makes the system very reliable. We use the system to obtain a dipole trap that we image using a beam derived from the same configuration.

DOI
10.1063/1.3680612

Related papers

Semiconductor Tapered-amplified Laser(TPA) Set for Rb Cooling System

Hai Wang

In this paper,we report an optical power amplifier operating at 780 nm.The optical power amplifier is a semiconductor tapered amplifier(Eagleyard,EYP-TPA-0780-01000);the output power from the optical power amplifier is up to about 600 mW when a seeding laser beam with a power of 25 mW is injected into the amplifier.After beam shaping by lens,frequency shifting by an acousto-optical modulator(AOM) and spatial filtering by a single-mode fiber,the output power is up to 110 mW.The presented optical power amplifier may be applied into the MOT for achieving a larger number of trapped atoms.

Acta Sinica Quantum Optica•Jan 1, 2009•1 citation

Microwave sidebands for laser cooling by direct modulation of a tapered amplifier

J. Mahnke, Sascha Kulas, I. Geisel +3 more

Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier, which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1 × 10(9) (87)Rb atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast adjustment over a wide frequency range, and the simultaneous extraction of unmodulated light for manipulation and detection. The low power consumption, small size, and applicability for multiple frequencies benefit a wide range of applications reaching from atom-based mobile sensors to the laser cooling of molecules.

arXiv:1306.0402•Review of Scientific Instruments•Jun 1, 2013•1 citation

Design and construction of cost-effective tapered amplifier systems for laser cooling and trapping experiments

Jayampathi Kangara, Andrew J. Hachtel, Matthew Gillette +9 more

We present plans for the construction and operation of a tapered optical amplifier (TA) system seeded by a single-mode, frequency-tunable, near-IR external-cavity diode laser. Our plans include machine drawings for the parts, electronic circuit diagrams, and information on prices and vendors. Instructions are provided on how to safely couple light into and out of the TA chip. Practical aspects of handling the chip are discussed as well. Because many cold atom experiments require light beams with Gaussian spatial profiles, measurements of the tapered amplifier light output through a single-mode optical fiber are presented as a function of seed intensity, polarization, and driving current.

American Journal of Physics•Jul 23, 2014•15 citations

Multiple isotope magneto-optical trap from a single diode laser

Victor Manuel Valenzuela, Saeed Hamzeloui, Monica Gutiérrez +1 more

We present a dual isotope magneto-optical trap produced using a single diode laser. We generate all the optical frequencies needed for trapping both species using a fiber intensity modulator. All the optical frequencies are amplified simultaneously using a tapered amplifier. The independent control of each frequency is on the RF side rather than on the optical side. This introduces an enormous simplification for laser-cooling applications that often require an acousto-optic modulator for each laser beam. Frequency-changing capabilities are limited by the modulator bandwidth (10 GHz). Traps for more isotopes can be simply added by including additional RF frequencies on the modulator.

arXiv:1304.3702•Journal of the Optical Society of America B•Apr 12, 2013•13 citations

High performance of semiconductor optical amplifier available for cold atom physics research

马千里 Qianli, 夏林 Lin Xia, 鹿博 Bo Lu +4 more

We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.

Chinese Optics Letters•Jan 1, 2009•2 citations

Multi-frequency telecom fibered laser system for potassium laser cooling

Charbel Cherfan, Maxime Denis, Denis Bacquet +7 more

We describe a compact and versatile multi-frequency laser system for laser-cooling potassium atoms by frequency doubling a fiber-optic telecom beam (≃1534 or 1540 nm). Low-power fiber-based telecom lasers and components generate a single beam containing the cooling and repumper half frequencies, subsequently amplified by a high-power amplifier. A final free-space second-harmonic generation stage provides a single beam with typically 2.5 W at quasi-resonant frequencies (≃767 or 770 nm) with high-quality mode and ready for laser cooling. This allowed us to trap up to 4×109 41K atoms with fast loading times (2.5 s) at sub-Doppler temperatures of 16 μK. This opens promising perspectives toward versatile and transportable ultracold atom setups.

arXiv:2109.03864•Applied Physics Letters•Nov 15, 2021•3 citations
We present a laser configuration capable of fast frequency changes with a high power output and a large tuning range. The system integrates frequency tuning with an acousto-optic modulator with a double pass tapered amplifier. A compensation circuit keeps the seed power constant and prevents damage to the amplifier. A single mode fiber decouples the modulation and amplification sections and keeps the alignment fixed. The small power required to saturate the amplifier makes the system very reliable. We use the system to obtain a dipole trap that we image using a beam derived from the same configuration.
In this paper,we report an optical power amplifier operating at 780 nm.The optical power amplifier is a semiconductor tapered amplifier(Eagleyard,EYP-TPA-0780-01000);the output power from the optical power amplifier is up to about 600 mW when a seeding laser beam with a power of 25 mW is injected into the amplifier.After beam shaping by lens,frequency shifting by an acousto-optical modulator(AOM) and spatial filtering by a single-mode fiber,the output power is up to 110 mW.The presented optical power amplifier may be applied into the MOT for achieving a larger number of trapped atoms.
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the gigahertz range. This gap cannot be closed with simple shifting techniques. Here, we present a method of generating sidebands at 6.6 GHz by modulating the current of a tapered amplifier, which is seeded by an unmodulated master laser. The sidebands enable trapping of 1.1 × 10(9) (87)Rb atoms in a chip-based magneto-optical trap. Compared to the direct modulation of the master laser, this method allows for an easy implementation, a fast adjustment over a wide frequency range, and the simultaneous extraction of unmodulated light for manipulation and detection. The low power consumption, small size, and applicability for multiple frequencies benefit a wide range of applications reaching from atom-based mobile sensors to the laser cooling of molecules.
We present plans for the construction and operation of a tapered optical amplifier (TA) system seeded by a single-mode, frequency-tunable, near-IR external-cavity diode laser. Our plans include machine drawings for the parts, electronic circuit diagrams, and information on prices and vendors. Instructions are provided on how to safely couple light into and out of the TA chip. Practical aspects of handling the chip are discussed as well. Because many cold atom experiments require light beams with Gaussian spatial profiles, measurements of the tapered amplifier light output through a single-mode optical fiber are presented as a function of seed intensity, polarization, and driving current.
We present a dual isotope magneto-optical trap produced using a single diode laser. We generate all the optical frequencies needed for trapping both species using a fiber intensity modulator. All the optical frequencies are amplified simultaneously using a tapered amplifier. The independent control of each frequency is on the RF side rather than on the optical side. This introduces an enormous simplification for laser-cooling applications that often require an acousto-optic modulator for each laser beam. Frequency-changing capabilities are limited by the modulator bandwidth (10 GHz). Traps for more isotopes can be simply added by including additional RF frequencies on the modulator.
We present a novel design of a compact, stable, and easy-adjustable semiconductor optical amplifier (SOA) system.This SOA system is capable of providing up to 560-mW laser power at the wavelength of 852 nm.For the continuous-wave (CW) seeding laser, the amplification gain can reach 18 dB.We add amplitude modulation onto the CW laser and measure the modulation amplification between seeding and output laser.The amplification gain remains constant within the frequency range from 10 Hz to 1 MHz.The whole system could work in ultra-stable condition: for CW seeding laser, the fluctuation of output power is less than 0.33% in several hours.
We describe a compact and versatile multi-frequency laser system for laser-cooling potassium atoms by frequency doubling a fiber-optic telecom beam (≃1534 or 1540 nm). Low-power fiber-based telecom lasers and components generate a single beam containing the cooling and repumper half frequencies, subsequently amplified by a high-power amplifier. A final free-space second-harmonic generation stage provides a single beam with typically 2.5 W at quasi-resonant frequencies (≃767 or 770 nm) with high-quality mode and ready for laser cooling. This allowed us to trap up to 4×109 41K atoms with fast loading times (2.5 s) at sub-Doppler temperatures of 16 μK. This opens promising perspectives toward versatile and transportable ultracold atom setups.