© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEEE International Conference on Communication Technology (ICCT)

Design and implementation of multi-mode QC-LDPC decoder

Yun Chen, Xiang Chen, Yifei Zhao, Chunhui Zhou, Jing Wang

Published Nov 1, 2010• 8 citations

Abstract

Low-density parity-check (LDPC) codes are one of the most effective error controlling methods, which now are widely used in multiple communication systems, for example, DVB-S2, 802.16e, etc. In these communication standards, the adopted LDPC codes are all quasi-cyclic low-density parity-check (QC-LDPC) codes. The parity-check matrices of QC-LDPC codes consist of arrays of circulants, in which each row is the cyclic shift of the row above it, and the first row is the cyclic shift of the last row. This character of QC-LDPC codes results in the linear encoding complexity and opens the door for the multi-mode LDPC decoders with enough flexibility of resource multiplexing. Based on the quasi-cyclic character of QC-LDPC codes, a design method for multi-mode QC-LDPC decoders is proposed in this paper. The node memory is skillfully organized and can be expediently addressed by a simple control unit to save memory consumption in hardware implementation. Then this design method is implemented and test on Field Programmable Gate Array (FPGA) platform. The test results show that the resource occupied by the multi-mode decoder is only a little more than that of maximal resource occupied by the single-mode decoder, and this multi-mode decoder can support at least 3 code rates with the throughput higher than 100 Mbps when the iteration number is fixed to 12 and the clock frequency is set to 200 MHZ.

DOI: 10.1109/icct.2010.5688680

Related papers

Design of Quasi-Cyclic Low Density Parity Check Decoder Using Optimized Min-Sum Algorithm

Rajarshini Mishra

Low-density parity-check (LDPC) have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost , time, power and bandwidth requirements of target applications. Quasi-cyclic low-density parity-check (QC-LDPC) codes are an important subclass of LDPC codes that are known as one of the most effective error controlling methods. Quasi cyclic codes are known to possess some degree of regularity. Many important communication standards such as DVB-S2 and 802.16e use these codes. The proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.Proposed decoder is well matched for VLSI implementation and will be implemented on Xilinx FPGA family

International Journal Of Engineering And Computer Science•Mar 26, 2018•0 citations

Design and implementation of a memory efficient QC-LDPC code decoder

Lei Wen

This paper studied the QC-LDPC(quasi-cyclic low density parity check) codes and min-sum decoding algorithm,and designed a proper ununiform decoding scheme for quantization.According to the structure of parity check matrix of QC-LDPC code,a decoder architecture was designed,with its components and function discussed in detail.According the decoding algorithm and quantization scheme,simulated error correcting performance was made.A QC-LDPC decoder was implemented in Xilinx XC3S2000 FPGA(field programmable gate array),whose codeword length is 9 216 and code rate 1/2.FPGA implementation results show that 30% memory can be reduced compared to the traditional designs,achieving better tradeoff between performance and complexity.

Journal of Chongqing University of Posts and Telecommunications•Jan 1, 2010•0 citations

Low-Complexity High-Speed Decoder Design for Quasi-Cyclic LDPC Codes

Zhongfeng Wang, Zhiqiang Cui

This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations

IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Jan 1, 2007•155 citations

A 3.0 Gb/s Throughput Hardware-Efficient Decoder for Cyclically-Coupled QC-LDPC Codes

Qing Hua Lu, Jianfeng Fan, Chiu‐Wing Sham +2 more

In this paper, we propose a new class of quasi-cyclic low-density parity-check (QC-LDPC) codes, namely cyclically-coupled QC-LDPC (CC-QC-LDPC) codes, and their RAM-based decoder architecture. CC-QC-LDPC codes have a simple structure and are constructed by cyclically-coupling a number of QC-LDPC subcodes. They can achieve throughput and error performance as excellent as LDPC convolutional codes, but with much lower hardware requirements. They are therefore promising candidates for future generations of communication systems such as long-haul optical communication systems. In particular, a rate-5/6 CC-QC-LDPC decoder has been implemented onto a field-programmable gate array (FPGA) and it achieves a throughput of 3.0 Gb/s at 100 MHz clock rate with 10-iteration decoding. No error floor is observed up to an$E_{b}/N_{0}$of 3.50 dB, where all$1.14\times 10^{16}$transmitted bits have been decoded correctly.

IEEE Transactions on Circuits and Systems I Regular Papers•Jan 1, 2016•34 citations

A reduced-complexity iterative scheme for decoding quasi-cyclic low-density parity-check codes

Shu Lin, Keke Liu, Juane Li +1 more

This paper presents a reduced-complexity iterative decoding scheme for quasi-cyclic (QC) low-density parity-check (LDPC) codes which is devised based on the section-wise cyclic structure of their parity-check matrices. The decoding scheme significantly reduces the hardware implementation complexity of a QC-LDPC code decoder in terms of the number of message processing units and the number of wires required to connect the message processing units. A long high-rate high-performance QC-LDPC code is used to demonstrate the effectiveness of the proposed decoding scheme. Using this long code as the mother code, descendant QC-LDPC codes of various lengths and rates can be constructed by puncturing and masking the columns and rows of the parity-check matrix of the mother code. These descendant codes can be decoded by deactivating specific sets of message processing units of the mother decoder.

Asilomar Conference on Signals, Systems and Computers (ACSSC)•Nov 1, 2014•6 citations

Code construction and FPGA implementation of a low-error-floor multi-rate low-density Parity-check code decoder

Lei Yang, Hui Liu, C.-J.R. Shi

With the superior error correction capability, low-density parity-check (LDPC) codes have initiated wide scale interests in satellite communication, wireless communication, and storage fields. In the past, various structures of single code-rate LDPC decoders have been reported. However, to cover a wide range of service requirements and diverse interference conditions in wireless applications, LDPC decoders that can operate at both high and low code rates are desirable. In this paper, a 9-k code length multi-rate LDPC decoder architecture is presented and implemented on a Xilinx field-programmable gate array device. Using pin selection, three operating modes, namely, the irregular 1/2 code mode, the regular 5/8 code mode, and the regular 7/8 code mode, are supported. Furthermore, to suppress the error floor level, a characterization on the conditions for short cycles in a LDPC code matrix expanded from a small base matrix is presented, and a cycle elimination algorithm is developed to detect and break such short cycles. The effectiveness of the cycle elimination algorithm has been verified by both simulation and hardware measurements, which show that the error floor is suppressed to a much lower level without incurring any performance penalty. The implemented decoder is tested in an experimental LDPC orthogonal frequency division multiplexing system and achieves the superior measured performance of block error rate below 10/sup -7/ at signal-to-noise ratio of 1.8 dB.

IEEE Transactions on Circuits and Systems I Fundamental Theory and Applications•Apr 1, 2006•64 citations

Low-density parity-check (LDPC) codes are one of the most effective error controlling methods, which now are widely used in multiple communication systems, for example, DVB-S2, 802.16e, etc. In these communication standards, the adopted LDPC codes are all quasi-cyclic low-density parity-check (QC-LDPC) codes. The parity-check matrices of QC-LDPC codes consist of arrays of circulants, in which each row is the cyclic shift of the row above it, and the first row is the cyclic shift of the last row. This character of QC-LDPC codes results in the linear encoding complexity and opens the door for the multi-mode LDPC decoders with enough flexibility of resource multiplexing. Based on the quasi-cyclic character of QC-LDPC codes, a design method for multi-mode QC-LDPC decoders is proposed in this paper. The node memory is skillfully organized and can be expediently addressed by a simple control unit to save memory consumption in hardware implementation. Then this design method is implemented and test on Field Programmable Gate Array (FPGA) platform. The test results show that the resource occupied by the multi-mode decoder is only a little more than that of maximal resource occupied by the single-mode decoder, and this multi-mode decoder can support at least 3 code rates with the throughput higher than 100 Mbps when the iteration number is fixed to 12 and the clock frequency is set to 200 MHZ.

Low-density parity-check (LDPC) have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost , time, power and bandwidth requirements of target applications. Quasi-cyclic low-density parity-check (QC-LDPC) codes are an important subclass of LDPC codes that are known as one of the most effective error controlling methods. Quasi cyclic codes are known to possess some degree of regularity. Many important communication standards such as DVB-S2 and 802.16e use these codes. The proposed Optimized Min-Sum decoding algorithm performs very close to the Sum-Product decoding while preserving the main features of the Min-Sum decoding, that is low complexity and independence with respect to noise variance estimation errors.Proposed decoder is well matched for VLSI implementation and will be implemented on Xilinx FPGA family

This paper studied the QC-LDPC(quasi-cyclic low density parity check) codes and min-sum decoding algorithm,and designed a proper ununiform decoding scheme for quantization.According to the structure of parity check matrix of QC-LDPC code,a decoder architecture was designed,with its components and function discussed in detail.According the decoding algorithm and quantization scheme,simulated error correcting performance was made.A QC-LDPC decoder was implemented in Xilinx XC3S2000 FPGA(field programmable gate array),whose codeword length is 9 216 and code rate 1/2.FPGA implementation results show that 30% memory can be reduced compared to the traditional designs,achieving better tradeoff between performance and complexity.

This paper studies low-complexity high-speed decoder architectures for quasi-cyclic low density parity check (QC-LDPC) codes. Algorithmic transformation and architectural level optimization are incorporated to reduce the critical path. Enhanced partially parallel decoding architectures are proposed to linearly increase the throughput of conventional partially parallel decoders through introducing a small percentage of extra hardware. Based on the proposed architectures, a (8176, 7154) Euclidian geometry-based QC-LDPC code decoder is implemented on Xilinx field programmable gate array (FPGA) Virtex-II 6000, where an efficient nonuniform quantization scheme is employed to reduce the size of memories storing soft messages. FPGA implementation results show that the proposed decoder can achieve a maximum (source data) decoding throughput of 172 Mb/s at 15 iterations

In this paper, we propose a new class of quasi-cyclic low-density parity-check (QC-LDPC) codes, namely cyclically-coupled QC-LDPC (CC-QC-LDPC) codes, and their RAM-based decoder architecture. CC-QC-LDPC codes have a simple structure and are constructed by cyclically-coupling a number of QC-LDPC subcodes. They can achieve throughput and error performance as excellent as LDPC convolutional codes, but with much lower hardware requirements. They are therefore promising candidates for future generations of communication systems such as long-haul optical communication systems. In particular, a rate-5/6 CC-QC-LDPC decoder has been implemented onto a field-programmable gate array (FPGA) and it achieves a throughput of 3.0 Gb/s at 100 MHz clock rate with 10-iteration decoding. No error floor is observed up to an

E_{b}/N_{0}

of 3.50 dB, where all

1.14\times 10^{16}

transmitted bits have been decoded correctly.

This paper presents a reduced-complexity iterative decoding scheme for quasi-cyclic (QC) low-density parity-check (LDPC) codes which is devised based on the section-wise cyclic structure of their parity-check matrices. The decoding scheme significantly reduces the hardware implementation complexity of a QC-LDPC code decoder in terms of the number of message processing units and the number of wires required to connect the message processing units. A long high-rate high-performance QC-LDPC code is used to demonstrate the effectiveness of the proposed decoding scheme. Using this long code as the mother code, descendant QC-LDPC codes of various lengths and rates can be constructed by puncturing and masking the columns and rows of the parity-check matrix of the mother code. These descendant codes can be decoded by deactivating specific sets of message processing units of the mother decoder.

With the superior error correction capability, low-density parity-check (LDPC) codes have initiated wide scale interests in satellite communication, wireless communication, and storage fields. In the past, various structures of single code-rate LDPC decoders have been reported. However, to cover a wide range of service requirements and diverse interference conditions in wireless applications, LDPC decoders that can operate at both high and low code rates are desirable. In this paper, a 9-k code length multi-rate LDPC decoder architecture is presented and implemented on a Xilinx field-programmable gate array device. Using pin selection, three operating modes, namely, the irregular 1/2 code mode, the regular 5/8 code mode, and the regular 7/8 code mode, are supported. Furthermore, to suppress the error floor level, a characterization on the conditions for short cycles in a LDPC code matrix expanded from a small base matrix is presented, and a cycle elimination algorithm is developed to detect and break such short cycles. The effectiveness of the cycle elimination algorithm has been verified by both simulation and hardware measurements, which show that the error floor is suppressed to a much lower level without incurring any performance penalty. The implemented decoder is tested in an experimental LDPC orthogonal frequency division multiplexing system and achieves the superior measured performance of block error rate below 10/sup -7/ at signal-to-noise ratio of 1.8 dB.