Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Digest - IEEE Antennas and Propagation Society. International Symposium

Magnetic antenna based on two dimensional DC superconducting quantum interference filter

Lin Wang, Qing Huo Liu, William Thomas Joines, Meng Qing Yuan

Published Jul 1, 2013• 0 citations
Publisher

Abstract

We first theoretically present a magnetic antenna based on a two dimensional DC superconducting quantum filter device. This antenna may detect the dynamical magnetic field instead of the absolute magnetic field. We call it B-antenna since it only responses to the external magnetic field. We show the robustness of 2D SQIF structure when the 2D SQIF chip encounters statistical distributions of the fabrication of individual Josephson junctions. Finally, we find that B-antenna can work properly even though the bias current is smaller than the critical current. Our research opens the dimensions of novel ultra-sensitive antennas by combing superconducting quantum interference filter devices and classic electromagnetic waves.

DOI
10.1109/aps.2013.6711357

Related papers

Two dimensional superconducting quantum interference filters

Jörg Oppenländer, Ch. Häussler, T. Träuble +4 more

We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•30 citations

SQIF Antenna Measurement in Near Field

G.V. Prokopenko, Oleg A. Mukhanov, Robert R. Romanofsky

We have been developing superconducting microwave (8-15 GHz bandwidth) magnetic field receiving antennas based on a two-dimensional (2D) Superconducting Quantum Interference Filter (SQIF) composed of bi-SQUID arrays. The 2D arrays are designed and fabricated using standard HYPRES niobium 4.5 kA/cm2process. The designed non-uniformity in inductances of bi-SQUID cells produces a pronounced zero-field antipeak in the flux-voltage response curve. We select the active antenna operation point by applying an appropriate dc flux bias current to set it in the middle of the antipeak linear slope. We measured comparative responses of the antenna with the SQIF dc bias at ON and OFF states when irradiated by a microwave signal from four different conventional planar ring and patch antennas placed in the near field.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•17 citations

Superconducting Quantum Interference Filters as RF Amplifiers

Oleg V. Snigirev, M. L. Chukharkin, Alexey S. Kalabukhov +4 more

The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•22 citations

High-Tc superconducting detector for highly-sensitive microwave magnetometry

F. Couëdo, Eliana Recoba Pawlowski, Julien Kermorvant +8 more

We have fabricated arrays of High-Tc Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive detectors for Radio Frequency (RF) waves. These subwavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We used a scalable ion irradiation technique to pattern the circuits and engineer the Josephson junctions needed to make SQUIDs. Here, we report on a 300 SQUID series array with the loop area ranging from 6 to 60 μm2, folded in a meander line covering a 3.5 mm × 120 μm substrate area, made out of a 150 nm thick YBa2Cu3O7 film. Operating at a temperature of T = 66 K in an unshielded magnetic environment under low DC bias current (I = 60 μA) and a DC magnetic field (B = 3 μT), this SQIF can detect a magnetic field of a few picoteslas at a frequency of 1.125 GHz, which corresponds to a sensitivity of a few hundreds of fT/Hz and shows a linear response over 7 decades in RF power. This work is a promising approach for the realization of low dissipative subwavelength gigahertz magnetometers.

arXiv:1901.08786•Applied Physics Letters•May 13, 2019•27 citations

Static and radio frequency magnetic response of high T c superconducting quantum interference filters made by ion irradiation

Eliana Recoba Pawlowski, Julien Kermorvant, Denis Crété +7 more

Abstract Superconducting quantum interference filters (SQIF) are promising devices for radio frequency (RF) detection combining low noise, high sensitivity, large dynamic range and wide-band capabilities. Impressive progress has been made recently in the field, with SQIF based antennas and amplifiers showing interesting properties in the GHz range using the well-established Nb/AlO x technology. The possibility to extend these results to high temperature superconductors (HTS) is still open, and different techniques to fabricate HTS SQIFs compete to make RF devices. We report on the DC and RF response of a high temperature SQIF fabricated by the ion irradiation technique. It is made up of 1000 superconducting quantum interference devices in series, with loop areas randomly distributed between 6 and 60 μ m 2 . The DC transfer factor is ∼450 V T −1 at optimal bias and temperature, and the maximum voltage swing ∼2.5 mV. We show that such a SQIF detects RF signals up to 150 MHz. It presents linear characteristics for RF power spanning more than five decades, and non-linearities develop beyond P RF = −35 dBm in our set-up configuration. The second harmonic generation has been shown to be at a minimum at the functioning point in the whole range of frequencies. A model has been developed which captures the essential features of the SQIF RF response.

arXiv:1802.10310•Superconductor Science and Technology•Jul 10, 2018•17 citations

Development of 2-D Bi-SQUID Arrays With High Linearity

Susan A. E. Berggren, G. Prokopenko, Patrick Longhini +11 more

We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.

arXiv:1301.2163•IEEE Transactions on Applied Superconductivity•Jan 29, 2013•44 citations
We first theoretically present a magnetic antenna based on a two dimensional DC superconducting quantum filter device. This antenna may detect the dynamical magnetic field instead of the absolute magnetic field. We call it B-antenna since it only responses to the external magnetic field. We show the robustness of 2D SQIF structure when the 2D SQIF chip encounters statistical distributions of the fabrication of individual Josephson junctions. Finally, we find that B-antenna can work properly even though the bias current is smaller than the critical current. Our research opens the dimensions of novel ultra-sensitive antennas by combing superconducting quantum interference filter devices and classic electromagnetic waves.
We have successfully developed a novel superconducting quantum interferometer based on Josephson junction networks with unconventional loop size distribution. For distinct theoretically determined distributions, the magnetic field B dependent dc voltage V(B) of the interferometer possesses a unique delta-peak like characteristics around B=0. Such devices are called Superconducting Quantum Interference Filters (SQIFs). The unique voltage response of SQIFs allows novel applications, e.g., absolute magnetic field sensors, high speed logical switches and non hysteretic low noise amplifiers which can be directly connected to standard room temperature electronics. In this paper we present new experimental and theoretical results on high performance two dimensional Superconducting Quantum Interference Filters (2D SQIFs). Such 2D SQIFs can be used as absolute magnetic field sensors. Our results indicate that due to the scaling behavior of the flux to voltage transfer function and the scaling of the white output noise, a highly sensitive absolute field sensor based on 2D SQIFs can be very small in size.
We have been developing superconducting microwave (8-15 GHz bandwidth) magnetic field receiving antennas based on a two-dimensional (2D) Superconducting Quantum Interference Filter (SQIF) composed of bi-SQUID arrays. The 2D arrays are designed and fabricated using standard HYPRES niobium 4.5 kA/cm2process. The designed non-uniformity in inductances of bi-SQUID cells produces a pronounced zero-field antipeak in the flux-voltage response curve. We select the active antenna operation point by applying an appropriate dc flux bias current to set it in the middle of the antipeak linear slope. We measured comparative responses of the antenna with the SQIF dc bias at ON and OFF states when irradiated by a microwave signal from four different conventional planar ring and patch antennas placed in the near field.
The superconducting quantum interference filter (SQIF) is a new type of superconducting device which has been recently proposed for highly sensitive magnetometers for absolute magnetic field measurements. It benefits of very high voltage-to-field response, which is, in contrast conventional dc SQUIDs, not periodical. The SQIF can also be used as a radiofrequency amplifier in a similar way as the dc SQUID that can operate in a gigahertz frequency range. We designed a series type of SQIF amplifier that is compatible to conventional YBa2Cu3O7(YBCO) technology on bicrystal substrates. We present analytical, numerical and scale modeling as well as first electrical measurements results at frequencies up to 10 GHz. The SQIF array consists of 50 loops with randomly distributed areas from 0.5 to 1.5 times of . We also compared it to the regular array of conventional SQUIDs with the same loop areas. We have additional dc contacts to each 5-th SQUIDs and the SQIFs for control and comparison. Devices are fabricated using Josephson junctions with 3 mum width formed in YBCO over 24/24 and 12/12 degrees grain boundaries in yttrium-stabilized zirconia (YSZ) bicrystal substrates.
We have fabricated arrays of High-Tc Superconducting Quantum Interference Devices (SQUIDs) with randomly distributed loop sizes as sensitive detectors for Radio Frequency (RF) waves. These subwavelength size devices known as Superconducting Quantum Interference Filters (SQIFs) detect the magnetic component of the electromagnetic field. We used a scalable ion irradiation technique to pattern the circuits and engineer the Josephson junctions needed to make SQUIDs. Here, we report on a 300 SQUID series array with the loop area ranging from 6 to 60 μm2, folded in a meander line covering a 3.5 mm × 120 μm substrate area, made out of a 150 nm thick YBa2Cu3O7 film. Operating at a temperature of T = 66 K in an unshielded magnetic environment under low DC bias current (I = 60 μA) and a DC magnetic field (B = 3 μT), this SQIF can detect a magnetic field of a few picoteslas at a frequency of 1.125 GHz, which corresponds to a sensitivity of a few hundreds of fT/Hz and shows a linear response over 7 decades in RF power. This work is a promising approach for the realization of low dissipative subwavelength gigahertz magnetometers.
Abstract Superconducting quantum interference filters (SQIF) are promising devices for radio frequency (RF) detection combining low noise, high sensitivity, large dynamic range and wide-band capabilities. Impressive progress has been made recently in the field, with SQIF based antennas and amplifiers showing interesting properties in the GHz range using the well-established Nb/AlO x technology. The possibility to extend these results to high temperature superconductors (HTS) is still open, and different techniques to fabricate HTS SQIFs compete to make RF devices. We report on the DC and RF response of a high temperature SQIF fabricated by the ion irradiation technique. It is made up of 1000 superconducting quantum interference devices in series, with loop areas randomly distributed between 6 and 60 μ m 2 . The DC transfer factor is ∼450 V T −1 at optimal bias and temperature, and the maximum voltage swing ∼2.5 mV. We show that such a SQIF detects RF signals up to 150 MHz. It presents linear characteristics for RF power spanning more than five decades, and non-linearities develop beyond P RF = −35 dBm in our set-up configuration. The second harmonic generation has been shown to be at a minimum at the functioning point in the whole range of frequencies. A model has been developed which captures the essential features of the SQIF RF response.
We develop a two-dimensional (2-D) superconducting quantum interference filter (SQIF) array based on the recently introduced high-linearity tri-junction bi-SQUIDs (superconducting quantum interference device). Our bi-SQUID SQIF array design is based on a tight integration of individual bi-SQUID cells sharing inductances with adjacent cells. We provide extensive computer simulations, analysis, and experimental measurements, in which we explore the phase dynamics and linearity of the array voltage response. The nonuniformity in inductances of the bi-SQUIDs produces a pronounced zero-field single antipeak in the voltage response. The antipeak linearity and size can be optimized by varying the critical current of the additional junction of each bi-SQUID. The layout implementation of the tight 2-D array integration leads to a distinct geometrical diamond shape formed by the merged dual bi-SQUID cells. Different-sized 2-D arrays are fabricated using the standard HYPRES niobium 4.5 kA/cm2fabrication process. The measured linearity, power gain, and noise properties will be analyzed for different array sizes and the results will be compared with circuit simulations. We will discuss a design approach for the electrically small magnetic field antenna and low-noise amplifiers with high bandwidth based on these 2-D bi-SQUID SQIF arrays. The results from this work will be used to design chips densely and completely covered in bi-SQUIDs that have optimized parameters such as linearity and power gain.