In this letter, we compute the secrecy rate of decode-and-forward (DF) relay beamforming with finite input alphabet of size M. Source and relays operate under a total power constraint. First, we observe that the secrecy rate with finite-alphabet input can go to zero as the total power increases, when we use the source power and the relay weights obtained assuming Gaussian input. This is because the capacity of an eavesdropper can approach the finite-alphabet capacity of \frac{1}{2}\log_2 M with increasing total power, due to the inability to completely null in the direction of the eavesdropper. We then propose a transmit power control scheme where the optimum source power and relay weights are obtained by carrying out transmit power (source power plus relay power) control on DF with Gaussian input using semi-definite programming, and then obtaining the corresponding source power and relay weights which maximize the secrecy rate for DF with finite-alphabet input. The proposed power control scheme is shown to achieve increasing secrecy rates with increasing total power with a saturation behavior at high total powers.
This paper considers secure communication for amplify-and-forward (AF) relay networks with finite alphabet input. The joint optimization of power selection and beamforming design for improving the physical layer security of AF relay networks with single and multiple eavesdroppers is investigated. For the case with one eavesdropper, we transform the problem of multi-variable beamforming design into a single-variable optimization problem through semi-definite programming and solve it with one-dimensional optimization techniques. Moreover, the corresponding source power is obtained by utilizing the relation between the mutual information and minimum mean square error. Then, an iterative two-step algorithm is proposed to maximize the achievable secrecy rate. In the presence of multiple eavesdroppers, a zero-forcing beamforming scheme, where the confidential signal is nulled out in the direction of all eavesdroppers, is proposed to enhance the physical layer security. We decouple the source power and the beamforming vector by transforming the achievable secrecy rate into a single-variable function of the source power. Then, the suboptimal source power and the corresponding beamforming vector with low-complexity are derived. Numerical examples show that the proposed schemes significantly enhance the secrecy performance of the AF relay networks.
In this paper, we consider decode-and-forward (DF) relay beamforming with imperfect channel state information (CSI), cooperative artificial noise (AN) injection, and finite-alphabet input in the presence of an user and
J non-colluding eavesdroppers. The communication between the source and the user is aided by a multiple-input-multiple-output (MIMO) DF relay. We use the fact that a wiretap code consists of two parts: i) common message (non-secret), and ii) secret message. The source transmits two independent messages: i) common message (non-secret), and ii) secret message. The common message is transmitted at a fixed rate
R0, and it is intended for the user. The secret message is also intended for the user but it should be kept secret from the
J eavesdroppers. The source and the MIMO DF relay operate under individual power constraints. In order to improve the secrecy rate, the MIMO relay also injects artificial noise. The CSI on all the links are assumed to be imperfect and CSI errors are assumed to be norm bounded. In order to maximize the worst case secrecy rate, we maximize the worst case link information rate to the user subject to: i) the individual power constraints on the source and the MIMO relay, and ii) the best case link information rates to
J eavesdroppers be less than or equal to
R0 in order to support a fixed common message rate
R0. Numerical results showing the effect of perfect/imperfect CSI, presence/absence of AN with finite-alphabet input on the secrecy rate are presented.
In this paper, we evaluate secrecy rates in cooperative relay beamforming in the presence of imperfect channel state information (CSI) and multiple eavesdroppers. A source-destination pair aided by k out of M relays, 1 ≤ k ≤ M, using decode-and-forward relay beamforming is considered. We compute the worst case secrecy rate with imperfect CSI in the presence of multiple eavesdroppers, where the number of eavesdroppers can be more than the number of relays. We solve the optimization problem for all possible relay combinations to find the secrecy rate and optimum source and relay weights subject to a total power constraint. We relax the rank-1 constraint on the complex semi-definite relay weight matrix and use S-procedure to reformulate the optimization problem that can be solved using convex semi-definite programming.
In this paper, we consider decode-and-forward (DF) relay beamforming for secrecy with cooperative jamming (CJ) in the presence of multiple eavesdroppers. The communication between a source-destination pair is aided by a multiple-input multiple-output (MIMO) relay. The source has one transmit antenna and the destination and eavesdroppers have one receive antenna each. The source and the MIMO relay are constrained with powers PSand PR, respectively. We relax the rank-1 constraint on the signal beamforming matrix and transform the secrecy rate max-min optimization problem to a single maximization problem, which is solved by semidefinite programming techniques. We obtain the optimum source power, signal relay weights, and jamming covariance matrix. We show that the solution of the rank-relaxed optimization problem has rank-1. Numerical results show that CJ can improve the secrecy rate.
In this paper, we study beamforming in decode-and-forward (DF) relaying using multiple relays, where the source node sends a secret message as well as a non-secret message to the destination node in the presence of multiple non-colluding eavesdroppers. The non-secret message is transmitted at a fixed rate
R0 and requires no protection from the eavesdroppers, whereas the secret message needs to be protected from the eavesdroppers. The source and relays operate under a total power constraint. We find the optimum source powers and weights of the relays for both secret and non-secret messages which maximize the worst case secrecy rate for the secret message as well as meet the information rate constraint
R0 for the non-secret message. We solve this problem for the cases when (
i) perfect channel state information (CSI) of all links is known, and (
ii) only the statistical CSI of the eavesdroppers links and perfect CSI of other links are known.
In this paper, collaborative use of relays to form a beamforming system and provide physical-layer security is investigated. In particular, decode-and-forward (DF) and amplify-and-forward (AF) relay beamforming designs under total and individual relay power constraints are studied with the goal of maximizing the secrecy rates when perfect channel state information (CSI) is available. In the DF scheme, the total power constraint leads to a closed-form solution, and in this case, the optimal beamforming structure is identified in the low and high signal-to-noise ratio (SNR) regimes. The beamforming design under individual relay power constraints is formulated as an optimization problem which is shown to be easily solved using two different approaches, namely semidefinite programming and second-order cone programming. A simplified and suboptimal technique which reduces the computation complexity under individual power constraints is also presented. In the AF scheme, not having analytical solutions for the optimal beamforming design under both total and individual power constraints, an iterative algorithm is proposed to numerically obtain the optimal beamforming structure and maximize the secrecy rates. Finally, robust beamforming designs in the presence of imperfect CSI are investigated for DF-based relay beamforming, and optimization frameworks are provided