This paper considers secure communication for amplify-and-forward (AF) relay networks with finite alphabet input. The joint optimization of power selection and beamforming design for improving the physical layer security of AF relay networks with single and multiple eavesdroppers is investigated. For the case with one eavesdropper, we transform the problem of multi-variable beamforming design into a single-variable optimization problem through semi-definite programming and solve it with one-dimensional optimization techniques. Moreover, the corresponding source power is obtained by utilizing the relation between the mutual information and minimum mean square error. Then, an iterative two-step algorithm is proposed to maximize the achievable secrecy rate. In the presence of multiple eavesdroppers, a zero-forcing beamforming scheme, where the confidential signal is nulled out in the direction of all eavesdroppers, is proposed to enhance the physical layer security. We decouple the source power and the beamforming vector by transforming the achievable secrecy rate into a single-variable function of the source power. Then, the suboptimal source power and the corresponding beamforming vector with low-complexity are derived. Numerical examples show that the proposed schemes significantly enhance the secrecy performance of the AF relay networks.
This paper considers secure communication for amplify-and-forward (AF) relay networks with finite alphabet input. The joint optimization of power selection and beamforming design for improving the physical layer security of AF relay networks with single and multiple eavesdroppers is investigated. For the case with one eavesdropper, we transform the problem of multi-variable beamforming design into a single-variable optimization problem through semi-definite programming and solve it with one-dimensional optimization techniques. Moreover, the corresponding source power is obtained by utilizing the relation between the mutual information and minimum mean square error. Then, an iterative two-step algorithm is proposed to maximize the achievable secrecy rate. In the presence of multiple eavesdroppers, a zero-forcing beamforming scheme, where the confidential signal is nulled out in the direction of all eavesdroppers, is proposed to enhance the physical layer security. We decouple the source power and the beamforming vector by transforming the achievable secrecy rate into a single-variable function of the source power. Then, the suboptimal source power and the corresponding beamforming vector with low-complexity are derived. Numerical examples show that the proposed schemes significantly enhance the secrecy performance of the AF relay networks.
Abstract This paper investigates security-oriented beamforming designs in a relay network composed of a source-destination pair, multiple relays, and a passive eavesdropper. Unlike most of the earlier works, we assume that only statistical information of the relay-eavesdropper channels is known to the relays. We propose beamforming solutions for amplify-and-forward (AF) and decode-and-forward (DF) relay networks to improve secrecy capacity. In an AF network, the beamforming design is obtained by approximating a product of two correlated Rayleigh quotients to a single Rayleigh quotient using the Taylor series expansion. Our study reveals that in an AF network, the secrecy capacity does not always grow as the eavesdropper moves away from the relays or as total relay transmit power increases. Moreover, if the destination is nearer to the relays than the eavesdropper is, a suboptimal power is derived in closed form through monotonicity analysis of secrecy capacity. While in a DF network, secrecy capacity is a single Rayleigh quotient problem which can be easily solved. We also found that if the relay-eavesdropper distances are about the same, it is unnecessary to consider the eavesdropper in a DF network. Numerical results show that for either AF or DF relaying protocol, the proposed beamforming scheme provides higher secrecy capacity than traditional approaches.
This letter studies cooperative secure beamforming for amplify-and-forward (AF) relay networks in the presence of multiple eavesdroppers. Under both total and individual relay power constraints, we propose two schemes, namely secrecy rate maximization (SRM) beamforming and null-space beamforming. In the first scheme, our design problem is based on SRM. Using a suboptimal, but convex, technique-semidefinite relaxation (SDR), we show that this problem can be handled by performing a one-dimensional search which involves solving a sequence of semidefinite programs (SDPs). To reduce the complexity, in the second scheme, we instead maximize the information rate at the destination while completely eliminating the information leakage to all eavesdroppers. We prove that this problem can be exactly solved by SDR with one SDP only. Simulation results demonstrate the performance gains of the two proposed designs.
In this paper, we investigate the secure relay beamforming problem for simultaneous wireless information and power transfer (SWIPT) in an amplify-and-forward (AF) two-way relay network. We consider scenarios that the eavesdropper's channel state information (CSI) is and is not available. When the eavesdropper's CSI is available, our objective is to maximize the achievable secrecy sum rate under transmit power constraint and energy harvesting constraint. Since the optimization problem is nonconvex, we derive its performance upper bound, which requires 2-D search, where a semidefinite programming is solved in each step. We also propose an upper bound-based rank-one solution by employing the Gaussian randomization method. To reduce computational complexity, we transform the optimization problem into a difference-of-convex programming and propose a sequential parametric convex approximation (SPCA)-based iterative algorithm to find a locally optimal solution. Furthermore, we also propose a zero-forcing (ZF)-based suboptimal solution. Simulation results demonstrate that the upper bound-based rank-one solution archives the performance almost the same as the upper bound that has high computational complexity. The low-complexity SPCA-based locally optimal solution performs close to the upper bound. The ZF-based suboptimal solution has the lowest computational complexity among the proposed solutions. When the eavesdropper's CSI is not available, we propose an artificial noise-aided secure relay beamforming scheme.
Physical layer security has attracted a great deal of attentions in recent years. This is achieved through using the physical layer characteristics to help sender to transfer data reliably with perfect secrecy. Using multiple-antenna relay node can improve the secrecy capacity of such channel. In this paper, we study the cooperative wiretap channel in which secure data transmission is achieved with the help of a MIMO Amplify and Forward (AF) relay. In such network, it is assumed multiple eavesdroppers attempt to listen to the relay transmitted signal and try to decode the source message. We assume the relay makes use of separated transmit/receive beamforming vectors, dubbed rank-one beamforming matrix. The beamforming vectors are computed such that the achievable secrecy rate is maximized, assuming the relay is subject to a maximum transmit power constraint. Accordingly, it is shown that the problem of finding proper receive beamforming vector can be translated into a scalar optimization problem, where using that the transmit beamforming vector can be obtained through solving a Semi-Definite Programming (SDP) problem.
In this paper, collaborative use of relays to form a beamforming system and provide physical-layer security is investigated. In particular, decode-and-forward (DF) and amplify-and-forward (AF) relay beamforming designs under total and individual relay power constraints are studied with the goal of maximizing the secrecy rates when perfect channel state information (CSI) is available. In the DF scheme, the total power constraint leads to a closed-form solution, and in this case, the optimal beamforming structure is identified in the low and high signal-to-noise ratio (SNR) regimes. The beamforming design under individual relay power constraints is formulated as an optimization problem which is shown to be easily solved using two different approaches, namely semidefinite programming and second-order cone programming. A simplified and suboptimal technique which reduces the computation complexity under individual power constraints is also presented. In the AF scheme, not having analytical solutions for the optimal beamforming design under both total and individual power constraints, an iterative algorithm is proposed to numerically obtain the optimal beamforming structure and maximize the secrecy rates. Finally, robust beamforming designs in the presence of imperfect CSI are investigated for DF-based relay beamforming, and optimization frameworks are provided
This paper considers secure transmission design for multiple-input-single-output multiple multi-antenna eavesdroppers networks with finite alphabet inputs. To improve the achievable secrecy rate, the joint optimization of beamforming vector and transmitting power is studied. We transform the multivariable problem into a single-variable problem, and then derive the beamforming vector and the transmitting power using one-dimensional search method. Specially, the secure transmission designs in the extremely signal-to-noise ratio (SNR) regime are investigated. In the low SNR regime, the problem of beamforming design is transformed into a semi-definite programming problem, which can be handled by interior-pointbased methods, and the optimal transmitting power is obtained. Besides, two different secure schemes, which are zero-force beamforming scheme and joint beamforming and jamming scheme, are proposed to increase the achievable secrecy rate at high SNR. Numerical results demonstrate that the proposed schemes significantly improve the secrecy performance of the system.