Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Comparison of Josephson radiation properties of different YBa 2 Cu 3 O 7 thin film junctions

Gerhard Kunkel, M. Bode, F. Wang, Michael I. Faley, M. Siegel, W. Zander, Jürgen Schubert, U. Poppe, Alex I. Braginski

Published Jul 2, 1994• 0 citations
Publisher

Abstract

We have investigated the Josephson radiation from different types of YBa2Cu3O7 (YBCO) thin film junctions: step-edge (SEJ), biepitaxial, and superconductor-normal conductor- superconductor (SNS) with N=Au and PrBa2Cu3O7. The radiation was detected using a nonresonant radiometer system with a receiving frequency of 11-12 GHz. The current-voltage characteristics were measured simultaneously with the radiation spectra in the temperature range from 4.2 to 90 K. All junctions exhibited a large emission peak at a voltage which was related to the frequency through the second Josephson relation. Typically, for high temperatures, and, therefore, small critical currents, the experimental data of the radiation linewidth agreed well with the theoretical predictions of the RSJ model. At lower temperatures the experimental linewidths deviated from the theoretical values due to additional noise sources in the junctions. Some of the SEJs showed a nonmonotonic dependence of the linewidth on temperature. Such SEJ data will be discussed in terms of a model which treats the SEJ as an interferometer consisting of a parallel array of Josephson junctions.

DOI
10.1117/12.181011

Related papers

Analysis of Josephson radiation from YBa2Cu3O7thin-film Josephson junctions

Gerhard Kunkel, M Bode, F Wang +4 more

We have investigated the Josephson radiation from different types of YBa 2 Cu 3 O 7 (YBCO) thin-film Josephson junctions: step-edge junctions (SEJs), biepitaxial junctions and SNS junctions with N=Au. The radiation was detected using a non-resonant radiometer system with a receiving frequency of 11-12 GHz. The current-voltage characteristics were measured simultaneously with the radiation spectra in the temperature range 4.2-90 K. All junctions exhibited a large emission peak at a voltage which was related to the frequency through the second Josephson relation. Typically, for high temperatures, and therefore small critical currents, the measured radiation linewidth agreed well with the theoretical predictions. At lower temperatures the experimental linewidths deviated from the theoretical values due to additional noise sources in the junctions. Some of the SEJs showed a non-monotonic dependence of the linewidth on temperature. It is suggested that such SEJ data may be discussed in terms of a model which treats the SEJ as an interferometer consisting of a parallel array of random Josephson junctions.

Superconductor Science and Technology•May 1, 1994•6 citations

Detection of the Josephson self-radiation from YBCO step-edge junctions in millimeter-wave

K. Lee, Ienari Iguchi

We have investigated both DC and AC Josephson effects of the YBa/sub 2/Cu/sub 3/O/sub y/ (YBCO) thin film step-edge junctions; single step-edge junction on LaAlO/sub 3/ substrate with the step angle about 50-60/spl deg/ and biepitaxial double step-edge junction made on MgO substrate with a CeO/sub 2/ seed layer. The Josephson self-radiation was directly detected using the total power radiometer receiver systems with receiving frequencies of K band (21-23 GHz) and millimeter-wave (46-48 GHz and 71-73 GHz) range, respectively. For single step-edge junctions, the Josephson self-radiation peaks exhibited at the voltages corresponding to the basic Josephson voltage-frequency relation. The maximum first-harmonic self-radiation power at receiving frequency f/sub REC/=72 GHz and Josephson linewidth were P(I)=2.0/spl times/10/sup -3/W and /spl Delta/f=3.62 GHz at 4.2 K, respectively. For microwave irradiation, the harmonic Shapiro steps and additional half integer steps with their quasi-periodic variation satisfying the Josephson equation V=(n/m)(hf/2e) were clearly observed. For double step-edge junctions, we also observed the steps corresponding to the two junction boundaries on the two steep steps. These behaviors described with different current-phase relations corresponding to the crystal orientation relationship between the two junction boundaries.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•2 citations

MIXING EXPERIMENTS AT W-BAND USING HIGH-TC JOSEPHSON JUNCTIONS

Oliver Harnack, Marian Darula, S. Beuven +1 more

We report on the mixing properties of high-T, superconductor (HTS) Josephson junctions. Direct radiation and heterodyne mixing experiments in the frequency range 78 GHz-119 GHz have been performed using YBa 2Cu30 7_ x (YBCO) step-edge junctions (SEJ) and bicrystal junctions (BO) on LaA10 3 and MgO substrates. Under external radiation our junctions showed harmonic phase synchronization (Shapiro steps) up to 1.88 THz. Junctions with current voltage characteristics (PVC) dose to predictions of the resistively shunted junction model (RSJ) were mounted into a heterodyne mixing setup. Under the radiation of two monochromatic signals we obtained conversion efficiencies around -14 dB in the 11 GHz intermediate frequency (IF) band. In the fundamental mixing regime we observed response at IF at working temperatures up to 72K. We demonstrated the operation of HTS Josephson junctions in the self-mixing mode. The experimental results are in good agreement with simulations using the RSJ model.

•Jan 1, 1997•0 citations

Millimeter-wave response and linewidth of Josephson oscillations in YBa2Cu3O7 step-edge junctions

Yu. Ya. Divin, A. V. Andreev, Georg Fischer +6 more

We have studied the response of YBa2Cu3O7 step-edge junctions to low-intensity millimeter-wave radiation in the temperature range from 4 to 80 K. The linewidth of the Josephson oscillations derived from the resonant part of the response at voltages V≂(h/2e)f is shown to be determined by thermal fluctuations at liquid nitrogen temperatures. At lower temperatures the observed linewidth increases indicating that low-frequency fluctuations become dominant in the junction as the temperature is reduced. Due to an inhomogeneous spatial distribution of the current the step-edge junction might be considered as a multijunction multiloop interferometer and the excess noise can be discussed in terms of spontaneous transitions between the different states of these interferometers.

Applied Physics Letters•Mar 15, 1993•18 citations

Low-frequency excess noise in SQUIDS with YBa2Cu3O7step-edge junctions

V. N. Glyantsev, M. Siegel, Jürgen Schubert +2 more

We have fabricated RF and DC SQUIDS with step-edge Josephson junctions (SEJ) and YBa 2 Cu 3 O 7 thin films. The low-frequency noise of these SQUIDS has been investigated as a function of temperature, bias current and magnetic field. Typically, the energy resolution in the white noise region of the DC SQUIDS with an inductance of 45 pH was 3*10 -30 J Hz -1 at 77.5 K. Depending on the bias current, the low-frequency spectrum could be of either 1/f type or Lorentzian type. The Lorentzian spectrum was generated by random telegraph signals (RTSS). An Arrhenius plot was obtained from the temperature dependence of the switching time of these RTSS. We have determined two barrier lengths of 0.23 eV and 1 eV of the two-level fluctuator (TLF) generating this RTS noise. From the magnetic-field dependence of the low-frequency noise we have found that the noise is periodic with the flux corresponding to the area of the SEJ. The results were discussed in terms of a model treating the SEJ as a multi-junction interferometer which forms a two-level fluctuator when the junction is placed inside a SQUID loop. The noise is generated by thermally activated switching of the SQUID between the two different states of the SQUID.

Superconductor Science and Technology•May 1, 1994•11 citations

High temperature superconductor-normal metal-superconductor Josephson junctions with high characteristic voltages

Peter A. Rosenthal, Erich N. Grossman, Ronald H. Ono +1 more

We have fabricated step edge superconductor-normal metal-superconductor microbridges using YBa2Cu3O7−x(YBCO) and noble metals with critical current-normal resistance (IcRN) products as high as 10 mV and normal resistances up to 38 Ω. Our fabrication process achieves high values of the IcRN product by exploiting the anisotropy in the properties of epitaxial YBCO films, allowing contact only between normal metal and superconductor through the crystalline axes which support the largest Josephson coupling. This results in a dramatic increase in the normal resistance of a junction without decreasing its critical current. We discuss the role of the superconductor-normal metal boundary resistance on the junction electrical properties. We have coupled submillimeter wave rf currents quasioptically into junctions integrated at the feeds of noble metal planar log periodic antennas and have induced up to 7 Shapiro steps in the current-voltage characteristics with a 760 GHz beam from a far infrared laser.

Applied Physics Letters•Oct 4, 1993•54 citations
We have investigated the Josephson radiation from different types of YBa2Cu3O7 (YBCO) thin film junctions: step-edge (SEJ), biepitaxial, and superconductor-normal conductor- superconductor (SNS) with N=Au and PrBa2Cu3O7. The radiation was detected using a nonresonant radiometer system with a receiving frequency of 11-12 GHz. The current-voltage characteristics were measured simultaneously with the radiation spectra in the temperature range from 4.2 to 90 K. All junctions exhibited a large emission peak at a voltage which was related to the frequency through the second Josephson relation. Typically, for high temperatures, and, therefore, small critical currents, the experimental data of the radiation linewidth agreed well with the theoretical predictions of the RSJ model. At lower temperatures the experimental linewidths deviated from the theoretical values due to additional noise sources in the junctions. Some of the SEJs showed a nonmonotonic dependence of the linewidth on temperature. Such SEJ data will be discussed in terms of a model which treats the SEJ as an interferometer consisting of a parallel array of Josephson junctions.
We have investigated the Josephson radiation from different types of YBa 2 Cu 3 O 7 (YBCO) thin-film Josephson junctions: step-edge junctions (SEJs), biepitaxial junctions and SNS junctions with N=Au. The radiation was detected using a non-resonant radiometer system with a receiving frequency of 11-12 GHz. The current-voltage characteristics were measured simultaneously with the radiation spectra in the temperature range 4.2-90 K. All junctions exhibited a large emission peak at a voltage which was related to the frequency through the second Josephson relation. Typically, for high temperatures, and therefore small critical currents, the measured radiation linewidth agreed well with the theoretical predictions. At lower temperatures the experimental linewidths deviated from the theoretical values due to additional noise sources in the junctions. Some of the SEJs showed a non-monotonic dependence of the linewidth on temperature. It is suggested that such SEJ data may be discussed in terms of a model which treats the SEJ as an interferometer consisting of a parallel array of random Josephson junctions.
We have investigated both DC and AC Josephson effects of the YBa/sub 2/Cu/sub 3/O/sub y/ (YBCO) thin film step-edge junctions; single step-edge junction on LaAlO/sub 3/ substrate with the step angle about 50-60/spl deg/ and biepitaxial double step-edge junction made on MgO substrate with a CeO/sub 2/ seed layer. The Josephson self-radiation was directly detected using the total power radiometer receiver systems with receiving frequencies of K band (21-23 GHz) and millimeter-wave (46-48 GHz and 71-73 GHz) range, respectively. For single step-edge junctions, the Josephson self-radiation peaks exhibited at the voltages corresponding to the basic Josephson voltage-frequency relation. The maximum first-harmonic self-radiation power at receiving frequency f/sub REC/=72 GHz and Josephson linewidth were P(I)=2.0/spl times/10/sup -3/W and /spl Delta/f=3.62 GHz at 4.2 K, respectively. For microwave irradiation, the harmonic Shapiro steps and additional half integer steps with their quasi-periodic variation satisfying the Josephson equation V=(n/m)(hf/2e) were clearly observed. For double step-edge junctions, we also observed the steps corresponding to the two junction boundaries on the two steep steps. These behaviors described with different current-phase relations corresponding to the crystal orientation relationship between the two junction boundaries.>
We report on the mixing properties of high-T, superconductor (HTS) Josephson junctions. Direct radiation and heterodyne mixing experiments in the frequency range 78 GHz-119 GHz have been performed using YBa 2Cu30 7_ x (YBCO) step-edge junctions (SEJ) and bicrystal junctions (BO) on LaA10 3 and MgO substrates. Under external radiation our junctions showed harmonic phase synchronization (Shapiro steps) up to 1.88 THz. Junctions with current voltage characteristics (PVC) dose to predictions of the resistively shunted junction model (RSJ) were mounted into a heterodyne mixing setup. Under the radiation of two monochromatic signals we obtained conversion efficiencies around -14 dB in the 11 GHz intermediate frequency (IF) band. In the fundamental mixing regime we observed response at IF at working temperatures up to 72K. We demonstrated the operation of HTS Josephson junctions in the self-mixing mode. The experimental results are in good agreement with simulations using the RSJ model.
We have studied the response of YBa2Cu3O7 step-edge junctions to low-intensity millimeter-wave radiation in the temperature range from 4 to 80 K. The linewidth of the Josephson oscillations derived from the resonant part of the response at voltages V≂(h/2e)f is shown to be determined by thermal fluctuations at liquid nitrogen temperatures. At lower temperatures the observed linewidth increases indicating that low-frequency fluctuations become dominant in the junction as the temperature is reduced. Due to an inhomogeneous spatial distribution of the current the step-edge junction might be considered as a multijunction multiloop interferometer and the excess noise can be discussed in terms of spontaneous transitions between the different states of these interferometers.
We have fabricated RF and DC SQUIDS with step-edge Josephson junctions (SEJ) and YBa 2 Cu 3 O 7 thin films. The low-frequency noise of these SQUIDS has been investigated as a function of temperature, bias current and magnetic field. Typically, the energy resolution in the white noise region of the DC SQUIDS with an inductance of 45 pH was 3*10 -30 J Hz -1 at 77.5 K. Depending on the bias current, the low-frequency spectrum could be of either 1/f type or Lorentzian type. The Lorentzian spectrum was generated by random telegraph signals (RTSS). An Arrhenius plot was obtained from the temperature dependence of the switching time of these RTSS. We have determined two barrier lengths of 0.23 eV and 1 eV of the two-level fluctuator (TLF) generating this RTS noise. From the magnetic-field dependence of the low-frequency noise we have found that the noise is periodic with the flux corresponding to the area of the SEJ. The results were discussed in terms of a model treating the SEJ as a multi-junction interferometer which forms a two-level fluctuator when the junction is placed inside a SQUID loop. The noise is generated by thermally activated switching of the SQUID between the two different states of the SQUID.
We have fabricated step edge superconductor-normal metal-superconductor microbridges using YBa2Cu3O7−x(YBCO) and noble metals with critical current-normal resistance (IcRN) products as high as 10 mV and normal resistances up to 38 Ω. Our fabrication process achieves high values of the IcRN product by exploiting the anisotropy in the properties of epitaxial YBCO films, allowing contact only between normal metal and superconductor through the crystalline axes which support the largest Josephson coupling. This results in a dramatic increase in the normal resistance of a junction without decreasing its critical current. We discuss the role of the superconductor-normal metal boundary resistance on the junction electrical properties. We have coupled submillimeter wave rf currents quasioptically into junctions integrated at the feeds of noble metal planar log periodic antennas and have induced up to 7 Shapiro steps in the current-voltage characteristics with a 760 GHz beam from a far infrared laser.