Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Detecting the motional state of single atoms in a high-finesse optical cavity by heterodyne spectroscopy

Seokchan Yoon, René Reimann, S. Manz, Tobias Kampschulte, Natalie Thau, Wolfgang Alt, Dieter Meschede

Published May 1, 2013• 0 citations
Publisher

Abstract

Summary form only given. We observe the quantized motion of single atoms strongly coupled to a high-finesse optical cavity and investigate dynamics of cavity-assisted atom cooling. Single caesium atoms are trapped in a blue-detuned standing-wave intracavity dipole trap, formed by a lock laser which is used to stabilize the cavity resonance frequency. A probe laser is coupled into the cavity mode and its transmission spectrum is monitored by means of photon-counting heterodyne spectroscopy [2].Measured heterodyne spectra of single atoms in the cavity are shown in Fig. 1 for two different lock-laser intensities and compared with theoretical models. The motional Raman sidebands are offset from the carrier beat signal at 1 MHz by the atomic vibrational frequency (±ν). They show asymmetric lineshapes due to the anharmonicity of the dipole potential.We investigate the dependence of the positions and lineshapes of the motional Raman sidebands on experimantal parameters such as the cavity-atom detuning, and lock-laser intensity. Information on the atomic temperature, cooling and heating rates, as well as the atomic position in the cavity with respect to an antinode of the cavity probe field are found by comparing the observed spectra with theoretical predictions [1]. In addition, this technique can also be used to analyze the cooling dynamics of a cavity-assisted EIT cooling scheme which has been recently studied and demonstrated in [3,4].

DOI
10.1109/cleoe-iqec.2013.6801625

Related papers

Controlled insertion and retrieval of atoms coupled to a high-finesse optical resonator

M Khudaverdyan, W Alt, I. Dotsenko +7 more

We experimentally investigate the interaction between one and two atoms and the field of a high-finesse optical resonator. Laser-cooled caesium atoms are transported into the cavity using an optical dipole trap. We monitor the interaction dynamics of a single atom strongly coupled to the resonator mode for several hundred milliseconds by observing the cavity transmission. Moreover, we investigate the position-dependent coupling of one and two atoms by shuttling them through the cavity mode. We demonstrate an alternative method, which suppresses heating effects, to analyse the atom–field interaction by retrieving the atom from the cavity and by measuring its final state.

arXiv:0805.0765•New Journal of Physics•Jul 11, 2008•65 citations

Controlled insertion and retrieval of atoms coupled to a high-finesse optical resonator

Mkrtych Khudaverdyan, Wolfgang Alt, I. Dotsenko +7 more

Abstract. We experimentally investigate the interaction between one and two atoms and the field of a high-finesse optical resonator. Laser-cooled caesium atoms are transported into the cavity using an optical dipole trap. We monitor the interaction dynamics of a single atom strongly coupled to the resonator mode for several hundred milliseconds by observing the cavity transmission. Moreover, we investigate the position-dependent coupling of one and two atoms by shuttling them through the cavity mode. We demonstrate an alternative method, which suppresses heating effects, to analyze the atom-field interaction by retrieving the atom from the cavity and by measuring its final state.

•Aug 4, 2013•43 citations

Normal-Mode Spectroscopy of a Single-Bound-Atom–Cavity System

Peter Maunz, Thomas Puppe, I. Schuster +3 more

The energy-level structure of a single atom strongly coupled to the mode of a high-finesse optical cavity is investigated. The atom is stored in an intracavity dipole trap and cavity cooling is used to compensate for inevitable heating. Two well-resolved normal modes are observed both in the cavity transmission and the trap lifetime. The experiment is in good agreement with a Monte Carlo simulation, demonstrating our ability to localize the atom to within lambda/10 at a cavity antinode.

arXiv:quant-ph/0406136•Physical Review Letters•Jan 27, 2005•161 citations

Cavity cooling and spectroscopy of a bound atom-cavity system

Peter Maunz

Cooling is indispensable for trapping and observing single free atoms.In atomic physics, this can be achieved efficiently by laser cooling.Conventional methods to laser cool atoms are based on repeated optical pumping cycles followed by spontaneous emission of a photon from the atom.Such pumping schemes can only be applied to certain atomic species, which have a closed optical transition.Drawbacks caused by photons spontaneously emitted from the atom can be avoided in the strongly coupled atom-cavity system in which energy and entropy can be removed by photons lost from the cavity.This thesis reports on the first observation of this cooling mechanism which does not rely on spontaneous emission.In the experiment, a single atom is captured in an intracavity dipole trap.Illuminating the system with a weak, slightly blue-detuned light beam extends the storage time of the atom in the trap.The observed cooling force is at least five times larger than the force achieved by free-space cooling methods at comparable excitation of a two-level atom.Utilising cavity cooling, single atoms are prepared strongly-coupled to the mode of a high-finesse cavity.This allows to observe two well-resolved normal-mode peaks in both the cavity transmission as well as in the trap lifetime.The experiment is in agreement with a Monte Carlo simulation, demonstrating the localisation of the atom to within a tenth of a wavelength.The ability to individually excite the normal modes opens new possibilities to use this system for applications in quantum information science, including the realisation of quantum-logic gates.In the future cavity cooling might be applied to systems which cannot be cooled by conventional methods as for instance molecules or an atom carrying a quantum bit.

•Mar 1, 2005•3 citations

Cooling to the Ground State of Axial Motion for One Atom Strongly Coupled to an Optical Cavity

A. David. Boozer, Andreea Boca, Ryan Miller +2 more

Localization to the ground state of axial motion is demonstrated for a single, trapped atom strongly coupled to the field of a high finesse optical resonator. The axial atomic motion is cooled by way of coherent Raman transitions on the red vibrational sideband. An efficient state detection scheme enabled by strong coupling in cavity QED is used to record the Raman spectrum, from which the state of atomic motion is inferred. We find that the lowest vibrational level of the axial potential with zero-point energy variant Planck's over 2 h omega a/2kB = 13 microK is occupied with probability P0 approximately 0.95.

arXiv:quant-ph/0606104•Physical Review Letters•Aug 23, 2006•160 citations

Trapping of single atom and precise control of its coupling strength in micro-optical cavity

Wei-Zhi Yan, Qing Fan, Pengfei Yang +3 more

Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.

Acta Physica Sinica•Jan 1, 2023•0 citations
Summary form only given. We observe the quantized motion of single atoms strongly coupled to a high-finesse optical cavity and investigate dynamics of cavity-assisted atom cooling. Single caesium atoms are trapped in a blue-detuned standing-wave intracavity dipole trap, formed by a lock laser which is used to stabilize the cavity resonance frequency. A probe laser is coupled into the cavity mode and its transmission spectrum is monitored by means of photon-counting heterodyne spectroscopy [2].Measured heterodyne spectra of single atoms in the cavity are shown in Fig. 1 for two different lock-laser intensities and compared with theoretical models. The motional Raman sidebands are offset from the carrier beat signal at 1 MHz by the atomic vibrational frequency (±ν). They show asymmetric lineshapes due to the anharmonicity of the dipole potential.We investigate the dependence of the positions and lineshapes of the motional Raman sidebands on experimantal parameters such as the cavity-atom detuning, and lock-laser intensity. Information on the atomic temperature, cooling and heating rates, as well as the atomic position in the cavity with respect to an antinode of the cavity probe field are found by comparing the observed spectra with theoretical predictions [1]. In addition, this technique can also be used to analyze the cooling dynamics of a cavity-assisted EIT cooling scheme which has been recently studied and demonstrated in [3,4].
We experimentally investigate the interaction between one and two atoms and the field of a high-finesse optical resonator. Laser-cooled caesium atoms are transported into the cavity using an optical dipole trap. We monitor the interaction dynamics of a single atom strongly coupled to the resonator mode for several hundred milliseconds by observing the cavity transmission. Moreover, we investigate the position-dependent coupling of one and two atoms by shuttling them through the cavity mode. We demonstrate an alternative method, which suppresses heating effects, to analyse the atom–field interaction by retrieving the atom from the cavity and by measuring its final state.
Abstract. We experimentally investigate the interaction between one and two atoms and the field of a high-finesse optical resonator. Laser-cooled caesium atoms are transported into the cavity using an optical dipole trap. We monitor the interaction dynamics of a single atom strongly coupled to the resonator mode for several hundred milliseconds by observing the cavity transmission. Moreover, we investigate the position-dependent coupling of one and two atoms by shuttling them through the cavity mode. We demonstrate an alternative method, which suppresses heating effects, to analyze the atom-field interaction by retrieving the atom from the cavity and by measuring its final state.
Cooling is indispensable for trapping and observing single free atoms.In atomic physics, this can be achieved efficiently by laser cooling.Conventional methods to laser cool atoms are based on repeated optical pumping cycles followed by spontaneous emission of a photon from the atom.Such pumping schemes can only be applied to certain atomic species, which have a closed optical transition.Drawbacks caused by photons spontaneously emitted from the atom can be avoided in the strongly coupled atom-cavity system in which energy and entropy can be removed by photons lost from the cavity.This thesis reports on the first observation of this cooling mechanism which does not rely on spontaneous emission.In the experiment, a single atom is captured in an intracavity dipole trap.Illuminating the system with a weak, slightly blue-detuned light beam extends the storage time of the atom in the trap.The observed cooling force is at least five times larger than the force achieved by free-space cooling methods at comparable excitation of a two-level atom.Utilising cavity cooling, single atoms are prepared strongly-coupled to the mode of a high-finesse cavity.This allows to observe two well-resolved normal-mode peaks in both the cavity transmission as well as in the trap lifetime.The experiment is in agreement with a Monte Carlo simulation, demonstrating the localisation of the atom to within a tenth of a wavelength.The ability to individually excite the normal modes opens new possibilities to use this system for applications in quantum information science, including the realisation of quantum-logic gates.In the future cavity cooling might be applied to systems which cannot be cooled by conventional methods as for instance molecules or an atom carrying a quantum bit.
Localization to the ground state of axial motion is demonstrated for a single, trapped atom strongly coupled to the field of a high finesse optical resonator. The axial atomic motion is cooled by way of coherent Raman transitions on the red vibrational sideband. An efficient state detection scheme enabled by strong coupling in cavity QED is used to record the Raman spectrum, from which the state of atomic motion is inferred. We find that the lowest vibrational level of the axial potential with zero-point energy variant Planck's over 2 h omega a/2kB = 13 microK is occupied with probability P0 approximately 0.95.
Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.