Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cavity cooling and spectroscopy of a bound atom-cavity system

Peter Maunz

Published Mar 1, 2005• 3 citations
OpenAlex

Abstract

Cooling is indispensable for trapping and observing single free atoms.In atomic physics, this can be achieved efficiently by laser cooling.Conventional methods to laser cool atoms are based on repeated optical pumping cycles followed by spontaneous emission of a photon from the atom.Such pumping schemes can only be applied to certain atomic species, which have a closed optical transition.Drawbacks caused by photons spontaneously emitted from the atom can be avoided in the strongly coupled atom-cavity system in which energy and entropy can be removed by photons lost from the cavity.This thesis reports on the first observation of this cooling mechanism which does not rely on spontaneous emission.In the experiment, a single atom is captured in an intracavity dipole trap.Illuminating the system with a weak, slightly blue-detuned light beam extends the storage time of the atom in the trap.The observed cooling force is at least five times larger than the force achieved by free-space cooling methods at comparable excitation of a two-level atom.Utilising cavity cooling, single atoms are prepared strongly-coupled to the mode of a high-finesse cavity.This allows to observe two well-resolved normal-mode peaks in both the cavity transmission as well as in the trap lifetime.The experiment is in agreement with a Monte Carlo simulation, demonstrating the localisation of the atom to within a tenth of a wavelength.The ability to individually excite the normal modes opens new possibilities to use this system for applications in quantum information science, including the realisation of quantum-logic gates.In the future cavity cooling might be applied to systems which cannot be cooled by conventional methods as for instance molecules or an atom carrying a quantum bit.

Related papers

Cavity cooling of a single atom

Peter Maunz, Thomas Puppe, I. Schuster +3 more

Abstract All conventional methods to laser-cool atoms rely on repeated cycles of optical pumping and spontaneous emission of a photon by the atom. Spontaneous emission in a random direction provides the dissipative mechanism required to remove entropy from the atom. However, alternative cooling methods have been proposed1, 2 for a single atom strongly coupled to a high-finesse cavity; the role of spontaneous emission is replaced by the escape of a photon from the cavity. Application of such cooling schemes would improve the performance of atom–cavity systems for quantum information processing3, 4. Furthermore, as cavity cooling does not rely on spontaneous emission, it can be applied to systems that cannot be laser-cooled by conventional methods; these include molecules2 (which do not have a closed transition) and collective excitations of Bose condensates5, which are destroyed by randomly directed recoil kicks. Here we demonstrate cavity cooling of single rubidium atoms stored in an intracavity dipole trap. The cooling mechanism results in extended storage times and improved localization of atoms. We estimate that the observed cooling rate is at least five times larger than that produced by free-space cooling methods, for comparable excitation of the atom.

Conference on Lasers and Electro-Optics•Jan 1, 2004•25 citations

Normal-Mode Spectroscopy of a Single-Bound-Atom–Cavity System

Peter Maunz, Thomas Puppe, I. Schuster +3 more

The energy-level structure of a single atom strongly coupled to the mode of a high-finesse optical cavity is investigated. The atom is stored in an intracavity dipole trap and cavity cooling is used to compensate for inevitable heating. Two well-resolved normal modes are observed both in the cavity transmission and the trap lifetime. The experiment is in good agreement with a Monte Carlo simulation, demonstrating our ability to localize the atom to within lambda/10 at a cavity antinode.

arXiv:quant-ph/0406136•Physical Review Letters•Jan 27, 2005•161 citations

Trapping of Single Atoms in Cavity QED

J. Ye, David W. Vernooy, Harry J. Kimble

By integrating the techniques of laser cooling and trapping with those of cavity quantum electrodynamics (QED), single cesium atoms have been trapped within the mode of a small, high finesse optical cavity in a regime of strong coupling. The observed lifetime for individual atoms trapped within the cavity mode is $\ensuremath{\tau}\ensuremath{\approx}28\mathrm{ms}$, and is limited by fluctuations of light forces arising from the far-detuned intracavity field. This initial realization of trapped atoms in cavity QED should enable diverse protocols in quantum information science.

arXiv:quant-ph/9908007•Physical Review Letters•Dec 13, 1999•386 citations

Trapping of single atom and precise control of its coupling strength in micro-optical cavity

Wei-Zhi Yan, Qing Fan, Pengfei Yang +3 more

Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.

Acta Physica Sinica•Jan 1, 2023•0 citations

Single atoms on demand for cavity QED experiments

I. Dotsenko

Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.

•Jan 1, 2007•5 citations

Normal-mode spectroscopy of a single atom in an optical cavity.

Peter Maunz, Thomas Puppe, I. Schuster +3 more

Utilizing cavity cooling in an intracavity dipole trap the normal-mode spectrum of single atoms strongly coupled to a cavity is observed for the first time by both measuring cavity transmission and atomic excitation.

Conference on Lasers and Electro-Optics•Jan 1, 2004•0 citations
Cooling is indispensable for trapping and observing single free atoms.In atomic physics, this can be achieved efficiently by laser cooling.Conventional methods to laser cool atoms are based on repeated optical pumping cycles followed by spontaneous emission of a photon from the atom.Such pumping schemes can only be applied to certain atomic species, which have a closed optical transition.Drawbacks caused by photons spontaneously emitted from the atom can be avoided in the strongly coupled atom-cavity system in which energy and entropy can be removed by photons lost from the cavity.This thesis reports on the first observation of this cooling mechanism which does not rely on spontaneous emission.In the experiment, a single atom is captured in an intracavity dipole trap.Illuminating the system with a weak, slightly blue-detuned light beam extends the storage time of the atom in the trap.The observed cooling force is at least five times larger than the force achieved by free-space cooling methods at comparable excitation of a two-level atom.Utilising cavity cooling, single atoms are prepared strongly-coupled to the mode of a high-finesse cavity.This allows to observe two well-resolved normal-mode peaks in both the cavity transmission as well as in the trap lifetime.The experiment is in agreement with a Monte Carlo simulation, demonstrating the localisation of the atom to within a tenth of a wavelength.The ability to individually excite the normal modes opens new possibilities to use this system for applications in quantum information science, including the realisation of quantum-logic gates.In the future cavity cooling might be applied to systems which cannot be cooled by conventional methods as for instance molecules or an atom carrying a quantum bit.
Abstract All conventional methods to laser-cool atoms rely on repeated cycles of optical pumping and spontaneous emission of a photon by the atom. Spontaneous emission in a random direction provides the dissipative mechanism required to remove entropy from the atom. However, alternative cooling methods have been proposed1, 2 for a single atom strongly coupled to a high-finesse cavity; the role of spontaneous emission is replaced by the escape of a photon from the cavity. Application of such cooling schemes would improve the performance of atom–cavity systems for quantum information processing3, 4. Furthermore, as cavity cooling does not rely on spontaneous emission, it can be applied to systems that cannot be laser-cooled by conventional methods; these include molecules2 (which do not have a closed transition) and collective excitations of Bose condensates5, which are destroyed by randomly directed recoil kicks. Here we demonstrate cavity cooling of single rubidium atoms stored in an intracavity dipole trap. The cooling mechanism results in extended storage times and improved localization of atoms. We estimate that the observed cooling rate is at least five times larger than that produced by free-space cooling methods, for comparable excitation of the atom.
By integrating the techniques of laser cooling and trapping with those of cavity quantum electrodynamics (QED), single cesium atoms have been trapped within the mode of a small, high finesse optical cavity in a regime of strong coupling. The observed lifetime for individual atoms trapped within the cavity mode is $\ensuremath{\tau}\ensuremath{\approx}28\mathrm{ms}$, and is limited by fluctuations of light forces arising from the far-detuned intracavity field. This initial realization of trapped atoms in cavity QED should enable diverse protocols in quantum information science.
Cavity quantum electrodynamic system with strongly coupled single atoms provides a good platform for studying quantum information processing, quantum simulation, quantum network, and distributed quantum computing. Cooling and trapping single atoms is a crucial technique in the quantum technology. At present, in a high-finesse cavity with finite space, cooling and trapping single atoms is a big challenge, even though it is a mature technique for free space. Great efforts have been made to cool and trap single atoms inside a cavity, and for a trapped atom its lifetime has reached as long as tens of seconds. Developing a more flexible method of cooling and trapping single atoms in a cavity is still essential for a strongly coupled cavity quantum electrodynamic system. In this work, we demonstrate experimentally that a single cesium atom in a cavity can be trapped by utilizing a single optical tweezer settled in cavity mode, and its lifetime is (2.60 ± 0.18) s. The experiment is carried out in a Fabry-Perot cavity, which is assembled by two concave mirrors each with a curvature radius of 100 mm, and cavity length of 335 μm. The concave surfaces are highly reflective, and the cavity has a finesse of 6.1 × 104. The 1080 nm optical tweezer with a waist of 2 μm is formed by an achromatic lens group with a numerical aperture of 0.4. At first, the precooled atomic assemble released from the magneto-optical trap (MOT) is transferred into cavity mode by an optical dipole trap with a waist of 36 μm. Then, one of the successfully transferred atoms is captured by the optical tweezer with the aid of cavity cooling mechanism. A blue detuned cavity locking laser is used as a standing-wave optical trap along the cavity axis. The signal of successfully trapped one atom is obtained by recording transmission of the cavity that will decrease owing to the strong coupling induced vacuum Rabi splitting. Finally, we demonstrate the precise manipulation of the atom-cavity coupling strength, which is achieved by scanning the position of the trapped atom step by step by using a high-precision translation stage. The system realized in this work can be used to study the dynamics of single atom-photon interactions with adjustable coupling strength. In addition, the mechanism adopted in this work is compatible with constructing tweezer arrays inside cavity mode, and thus possesses more flexibility and great potentials in cavity-based quantum entanglement and quantum simulation.
Cavity quantum electrodynamics (cavity QED) describes electromagnetic fields in a confined space and the radiative properties of atoms in such fields. The simplest example of such system is a single atom interacting with one mode of a high-finesse resonator. Besides observation and exploration of fundamental quantum mechanical effects, this system bears a high potential for applications quantum information science such as, e.g., quantum logic gates, quantum communication and quantum teleportation. In this thesis I present an experiment on the deterministic coupling of a single neutral atom to the mode of a high-finesse optical resonator. In Chapter 1 I describe our basic techniques for trapping and observing single cesium atoms. As a source of single atoms we use a high-gradient magneto-optical trap, which captures the atoms from background gas in a vacuum chamber and cools them down to millikelvin temperatures. The atoms are then transferred without loss into a standing-wave dipole trap, which provides a conservative potential required for experiments on atomic coherence such as quantum information processing and metrology on trapped atoms. Moreover, shifting the standing-wave pattern allows us to deterministically transport the atoms (Chapter 2). In combination with non-destructive fluorescence imaging of individual trapped atoms, this enables us to control their position with submicrometer precision over several millimeters along the dipole trap. The cavity QED system can distinctly display quantum behaviour in the so-called strong coupling regime, i.e., when the coherent atom-cavity coupling rate dominates dissipation in the system. This sets the main requirements on the resonator's properties: small mode volume and high finesse. Chapter 3 is devoted to the manufacturing, assembling, and testing of an ultra-high finesse optical Fabry-Perot resonator, stabilized to the atomic transition. In Chapter 4 I present the transportation of single atoms into the cavity and their coupling to the cavity mode. The strong coupling manifests itself in a strong reduction of the cavity transmission probed by a weak external laser. The atoms remain trapped and coupled to the cavity mode for several seconds until we move them out of the cavity for final analysis of their number and position.