Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Advanced Infocomm Technology

Four-wave mixing-based phase sensitive amplification with pulsed signal input

Xiaosheng Xiao, Perry Ping Shum

Published Jan 1, 2008• 0 citations
Publisher

Abstract

The four-wave mixing (FWM)-based phase sensitive amplification (PSA) with pulsed signal input is investigated. A set of exact analytical solutions for the output amplitude and phase of PSA is derived, taking into account the pump depletion and the self- and cross-phase modulation (SPM and XPM) from pumps, signal and idler. Simplified analytical expression of output idler power is obtained, which shows that, the amplified signal/idler pulse will be compressed firstly due to the phase distortion of input signal, then will be broadened due to pump-depletion.

DOI
10.1145/1509315.1509384

Related papers

Four-Wave-Mixing-Based Phase-Sensitive Amplification of Pulsed Signal in Fibers

Xiaosheng Xiao, Perry Ping Shum, Elham S. Nazemosadat +1 more

The four-wave-mixing-based phase-sensitive amplification of pulsed signals is analytically investigated, taking into account the pump depletion and the self- and cross-phase modulation (SPM and XPM) effects of the pumps and signals. Formulas for output phase and power are derived. It is found that, for a single-pulse signal input, the SPM/XPM of the signal will cause frequency chirping to the output; for a pulse-sequence, the amplitude-fluctuation of the input signal will destroy the phase regeneration through the SPM/XPM. In addition, the amplified signal pulse will initially be compressed and distorted, and then it will get broadened due to pump-depletion.

IEEE Photonics Technology Letters•Feb 9, 2009•4 citations

Characterization and Applications of Vector Phase-Sensitive Amplifiers

Abel Lorences-Riesgo

This work is devoted to the characterization of vector phase-sensitive amplifiers and processors. A detailed analysis of degenerate vector phase-sensitive amplifier (PSA) is performed.The gain and phase-sensitive extinction ratio are theoretically analyzed using three-wave theory. Experiments and simulation results confirm the validity of this three-wave theory. The influence of polarization-mode dispersion is also evaluated, showing that aligning the pump polarizations at the fiber input is essential in order to achieve the theoretically predicted results. The scheme is also compared to the degenerate scalar PSA scheme. At the same pump power, the vector PSA has lower gain but also less influence from higher-order idlers and lower pump depletion due to FWM between the pumps. Using the degenerate vector PSA, phase-sensitive (PS) amplification of dual-polarization (DP) binary phase-shift keying (BPSK) signals was demonstrated. To the best of our knowledge, this was the first demonstration of a DP-modulated signal with large net phase-sensitive gain. Furthermore, we also demonstrated that this scheme can phase regenerate the signal. The same scheme was also used for a different purpose: quadrature decomposition into two cross-polarized waves. We demonstrated demultiplexing of quadrature phase-shift keying (QPSK) signal into two cross-polarized BPSK signals by the operating the amplifier in phase-insensitive mode. The design of a novel phase-locked loop scheme enabled stable operation and negligible penalty in the decomposition.

•Jan 1, 2015•0 citations

Experimental analysis of degenerate vector phase-sensitive amplification

Abel Lorences-Riesgo, Fabrizio Chiarello, Carl Lundström +2 more

We comprehensively investigate a degenerate vector phase-sensitive amplifier (PSA). We determine the gain dependence on the relative phase and polarization angle between the pumps and the degenerate signal wave. The vector PSA is experimentally shown to be sensitive to the pump states of polarization (SOP) due to polarization mode dispersion in the fiber. However, the scheme performance agrees well with theory under specific pump SOPs and we achieve an on-off gain over 10 dB with a small deviation from the theoretically expected results. In comparison to the scalar scheme, the proposed vector scheme has larger tolerance for pump depletion due to four-wave mixing between pumps and generation of higher-order idlers.

Optics Express•Sep 2, 2014•19 citations

Unimpaired phase-sensitive amplification by vector four-wave mixing near the zero-dispersion frequency

Colin J. McKinstrie, Stojan Radic, Michael G. Raymer +1 more

Phase-sensitive amplification (PSA), which is produced by degenerate four-wave mixing (FWM) in a randomly-birefringent fiber, has the potential to improve the performance of optical communication systems. Scalar FWM, which is driven by parallel pumps, is impaired by the generation of pump-pump and pump-signal harmonics, which limit the level, and modify the phase sensitivity, of the signal gain. In contrast, vector FWM, which is driven by perpendicular pumps, is not impaired by the generation of harmonics. Vector FWM produces PSA with the classical properties of a one-mode squeezing transformation.

Optics Express•Jan 1, 2007•17 citations

Phase sensitive parametric amplifiers and their applications

Joseph Kakande

Phase sensitive amplification (PSA) is a remarkably powerful tool if implemented correctly - it allows amplification with a noise figure lower than quantum mechanics normally dictates, and also allows the development of systems that coherently process the phase of their optical inputs. PSA at infrared wavelengths can be achieved using second or third order optical nonlinearities - indeed the first demonstrations of PSA utilised degenerate three photon mixing in bulk crystals, allowing the observation of effects such as quantum quadrature squeezing. This PhD research project was aimed at translating the fascinating science of PSAs into applications, based on Kerr nonlinearity in optical fibres, capable of being deployed in modern core optical networks runnning at 40 Gbit/s and higher. This objective was an integral part of the European Union FP7 project PHASORS. Studies, both theoretical and experimental, were carried out on wideband non-degenerate PSAs. The inline cascaded fiber optic parametric amplifier (FOPA), in which a first phase insensitive FOPA is used to generate phase locked signal-idler pairs, followed by a second FOPA in which PSA takes place, was used to experimentally demonstrate PSA gain characteristics in linear and saturated modes of operation, with PSA obtained over 20 nm in the telecom C-band. Focus was then re-directed towards applying a dual pump PSA to DPSK regeneration. The amplitude and phase limiting characteristics of these devices were experimentally studied, in particular revealing that amplitude saturation arises due to an interplay between input phase and nonlinear phase matching along the nonlinear fibre. This feature was used to identify a regime of operation for DPSK regeneration combining simultaneous phase and amplitude regeneration. A practical DPSK regenerator based on a degenerate dual pump phase sensitive FOPA was built. The device advanced the state of the art by incorporating a pump synthesis stage that allowed black-box operation. Detailed measurements using noise sources with varying frequency distributions in both amplitude and in phase, are presented, and the ability of the system to improve the phase and amplitude characteristics of signals at its input was verified. Also presented are results showing the regenerator installed in the middle of an 800 km dark fiber link. Finally, a novel scheme was proposed and demonstrated that utilised parametric mixing to perform arbitrary phase quantization. This relied on the coherent addition of an M-level PSK signal with a conjugated (M-1)th phase harmonic, scaled by a coefficient m, to achieve M-level phase quantization. The concept was successfully demonstrated with QPSK data signals at 56 Gbaud, as well as used to quantize lower bandwidth test signals from 2 to 6 phase levels.

•Mar 1, 2012•3 citations

Influence of multiple four-wave-mixing processes on quantum noise of dual-pump phase-sensitive amplification in a fiber

Kyo Inoue

Phase-sensitive amplification (PSA) based on nonlinear parametric interaction provides low-noise amplification such that the noise figure can be 0 dB in principle. However, when an optical fiber is used as a nonlinear medium for PSA, multiple four-wave-mixing (FWM) processes other than the PSA process are induced, which can degrade the PSA noise performance, especially in dual-pump PSA with a narrow signal-pump wavelength separation. This paper investigates the influence of multiple FWM processes on quantum noise of dual-pump PSA in an optical fiber. The noise figure is calculated using quantum-mechanical operators, considering multiple FWM processes with the PSA process. Calculation examples are also presented, which indicate that the noise figure is degraded by 0.2–0.4 dB from the ideal 0 dB, depending on the signal-pump wavelength separation and fiber parameters.

Journal of the Optical Society of America B•May 10, 2019•10 citations
The four-wave mixing (FWM)-based phase sensitive amplification (PSA) with pulsed signal input is investigated. A set of exact analytical solutions for the output amplitude and phase of PSA is derived, taking into account the pump depletion and the self- and cross-phase modulation (SPM and XPM) from pumps, signal and idler. Simplified analytical expression of output idler power is obtained, which shows that, the amplified signal/idler pulse will be compressed firstly due to the phase distortion of input signal, then will be broadened due to pump-depletion.
The four-wave-mixing-based phase-sensitive amplification of pulsed signals is analytically investigated, taking into account the pump depletion and the self- and cross-phase modulation (SPM and XPM) effects of the pumps and signals. Formulas for output phase and power are derived. It is found that, for a single-pulse signal input, the SPM/XPM of the signal will cause frequency chirping to the output; for a pulse-sequence, the amplitude-fluctuation of the input signal will destroy the phase regeneration through the SPM/XPM. In addition, the amplified signal pulse will initially be compressed and distorted, and then it will get broadened due to pump-depletion.
This work is devoted to the characterization of vector phase-sensitive amplifiers and processors. A detailed analysis of degenerate vector phase-sensitive amplifier (PSA) is performed.The gain and phase-sensitive extinction ratio are theoretically analyzed using three-wave theory. Experiments and simulation results confirm the validity of this three-wave theory. The influence of polarization-mode dispersion is also evaluated, showing that aligning the pump polarizations at the fiber input is essential in order to achieve the theoretically predicted results. The scheme is also compared to the degenerate scalar PSA scheme. At the same pump power, the vector PSA has lower gain but also less influence from higher-order idlers and lower pump depletion due to FWM between the pumps. Using the degenerate vector PSA, phase-sensitive (PS) amplification of dual-polarization (DP) binary phase-shift keying (BPSK) signals was demonstrated. To the best of our knowledge, this was the first demonstration of a DP-modulated signal with large net phase-sensitive gain. Furthermore, we also demonstrated that this scheme can phase regenerate the signal. The same scheme was also used for a different purpose: quadrature decomposition into two cross-polarized waves. We demonstrated demultiplexing of quadrature phase-shift keying (QPSK) signal into two cross-polarized BPSK signals by the operating the amplifier in phase-insensitive mode. The design of a novel phase-locked loop scheme enabled stable operation and negligible penalty in the decomposition.
We comprehensively investigate a degenerate vector phase-sensitive amplifier (PSA). We determine the gain dependence on the relative phase and polarization angle between the pumps and the degenerate signal wave. The vector PSA is experimentally shown to be sensitive to the pump states of polarization (SOP) due to polarization mode dispersion in the fiber. However, the scheme performance agrees well with theory under specific pump SOPs and we achieve an on-off gain over 10 dB with a small deviation from the theoretically expected results. In comparison to the scalar scheme, the proposed vector scheme has larger tolerance for pump depletion due to four-wave mixing between pumps and generation of higher-order idlers.
Phase-sensitive amplification (PSA), which is produced by degenerate four-wave mixing (FWM) in a randomly-birefringent fiber, has the potential to improve the performance of optical communication systems. Scalar FWM, which is driven by parallel pumps, is impaired by the generation of pump-pump and pump-signal harmonics, which limit the level, and modify the phase sensitivity, of the signal gain. In contrast, vector FWM, which is driven by perpendicular pumps, is not impaired by the generation of harmonics. Vector FWM produces PSA with the classical properties of a one-mode squeezing transformation.
Phase sensitive amplification (PSA) is a remarkably powerful tool if implemented correctly - it allows amplification with a noise figure lower than quantum mechanics normally dictates, and also allows the development of systems that coherently process the phase of their optical inputs. PSA at infrared wavelengths can be achieved using second or third order optical nonlinearities - indeed the first demonstrations of PSA utilised degenerate three photon mixing in bulk crystals, allowing the observation of effects such as quantum quadrature squeezing. This PhD research project was aimed at translating the fascinating science of PSAs into applications, based on Kerr nonlinearity in optical fibres, capable of being deployed in modern core optical networks runnning at 40 Gbit/s and higher. This objective was an integral part of the European Union FP7 project PHASORS. Studies, both theoretical and experimental, were carried out on wideband non-degenerate PSAs. The inline cascaded fiber optic parametric amplifier (FOPA), in which a first phase insensitive FOPA is used to generate phase locked signal-idler pairs, followed by a second FOPA in which PSA takes place, was used to experimentally demonstrate PSA gain characteristics in linear and saturated modes of operation, with PSA obtained over 20 nm in the telecom C-band. Focus was then re-directed towards applying a dual pump PSA to DPSK regeneration. The amplitude and phase limiting characteristics of these devices were experimentally studied, in particular revealing that amplitude saturation arises due to an interplay between input phase and nonlinear phase matching along the nonlinear fibre. This feature was used to identify a regime of operation for DPSK regeneration combining simultaneous phase and amplitude regeneration. A practical DPSK regenerator based on a degenerate dual pump phase sensitive FOPA was built. The device advanced the state of the art by incorporating a pump synthesis stage that allowed black-box operation. Detailed measurements using noise sources with varying frequency distributions in both amplitude and in phase, are presented, and the ability of the system to improve the phase and amplitude characteristics of signals at its input was verified. Also presented are results showing the regenerator installed in the middle of an 800 km dark fiber link. Finally, a novel scheme was proposed and demonstrated that utilised parametric mixing to perform arbitrary phase quantization. This relied on the coherent addition of an M-level PSK signal with a conjugated (M-1)th phase harmonic, scaled by a coefficient m, to achieve M-level phase quantization. The concept was successfully demonstrated with QPSK data signals at 56 Gbaud, as well as used to quantize lower bandwidth test signals from 2 to 6 phase levels.
Phase-sensitive amplification (PSA) based on nonlinear parametric interaction provides low-noise amplification such that the noise figure can be 0 dB in principle. However, when an optical fiber is used as a nonlinear medium for PSA, multiple four-wave-mixing (FWM) processes other than the PSA process are induced, which can degrade the PSA noise performance, especially in dual-pump PSA with a narrow signal-pump wavelength separation. This paper investigates the influence of multiple FWM processes on quantum noise of dual-pump PSA in an optical fiber. The noise figure is calculated using quantum-mechanical operators, considering multiple FWM processes with the PSA process. Calculation examples are also presented, which indicate that the noise figure is degraded by 0.2–0.4 dB from the ideal 0 dB, depending on the signal-pump wavelength separation and fiber parameters.