Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Temperature dependence of a high-Tc single-flux-quantum logic gate up to 50 K

Kazuo Saitoh, Tadashi Utagawa, Youichi Enomoto

Published May 25, 1998• 11 citations
Publisher

Abstract

Basic characteristics of a simple single-flux-quantum (SFQ) logic gate using high-Tc material and Josephson junction (NdBa2Cu3O7−δ and focused ion beam junction) have been investigated. The logic gate consists of an rf-superconducting quantum interference device (rf-SQUID) and a dc-SQUID. In the logic gate, elementary SFQ logic operations, such as generating SFQ (dc/SFQ) and providing simultaneous readout (SFQ/dc), have been confirmed up to 50 K. The temperature dependencies of the output voltage level and the critical current-normal resistance (IcRn) product were compared, and the decreasing tendency of the output voltage level for increasing temperature was found to be more rapid than that of the IcRn product.

DOI
10.1063/1.121080

Related papers

Investigation for the basic characteristics of HTS SFQ logic gate

K. Saitoh, Tadashi Utagawa, Yûji Enomoto

The characteristics of a simple logic gate which consists of an rf-Superconducting QUantum Interference Device (SQUID) and dc-SQUID has been investigated in connection with the Single-Flux-Quantum (SFQ) logic operation and Josephson junction characteristics. The Josephson junctions were made of Neodymium Barium Copper Oxide thin film employing Focused Ion Beam technology. We confirmed the generating SFQ in the rf-SQUID and simultaneous read-out by the dc-SQUID up to 50 K. It has been found that the temperature dependence of output voltage level decreased more rapid than that of critical current normal resistance product. The origin of the discrepancy was studied using a phenomenological model of the Josephson junction and numerical simulation.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•1 citation

Fundamental operation of single-flux-quantum circuits using coplanar-type high-T c SQUIDs

Hiroyuki Fuke, Kazuo Saitoh, Tadashi Utagawa +1 more

We have fabricated coplanar type dc SQUIDs using NdBa2Cu3Oy superconducting thin films and operated fundamental single-flux-quantum (SFQ) circuits. The Josephson junctions were made by the narrow-focused ion beam irradiation technique. For a 145 μm wide and 10 μm long logic SQUID having a critical current of 105 μA and an inductive parameter (βL) of 28, a store and a restore of the flux quantum have been demonstrated at temperatures of 4.2–30 K. These operations were performed with an input pulsewidth of 5 ns (5 ns was the shortest input pulse width available from our function generating equipment). These results show experimentally the possibility of high speed operation in all high-Tc superconducting digital circuits.

Applied Physics Letters•Nov 4, 1996•11 citations

Logic Operation Using a High Tc Coupled Superconducting Quantum Interference Device

Kazuo Saitoh, Hiroyuki Fuke, Tadashi Utagawa +1 more

Operation principle of AND/OR logic has been realized in a coupled high-T c Superconducting QUantum Interference Device (SQUID). The device consists of rf- and dc-SQUID's. The logic operation is based on the nonlinear characteristics of the internal and external magnetic flux in the rf-SQUID. Results of the logic operation can be read out by the dc-SQUID. The device is made of NdBa2Cu3O7-δ superconducting thin film with superconducting weak links fabricated using a narrow-focused Ga-ion beam technology.

Japanese Journal of Applied Physics•Nov 1, 1996•4 citations

Voltage divider operation using high-Tc superconducting interface-engineered Josephson junctions

Kazuo Saitoh, Yoshihisa Soutome, Tokuumi Fukazawa +2 more

A rapid-single-flux-quantum toggle-flip-flop logic gate was fabricated using high-temperature superconducting interface-engineered Josephson junctions. It was shown that the gate can operate as a voltage divider up to 155 GHz at 15 K and 19 GHz at 27 K. At the same time, the temperature dependence of the IcRn product and the maximum divided voltage was compared. As a result, it was found that the ratio of these values is 0.4–0.1 for 15 K>T>27 K. Circuit simulation with noise sources reveals this peculiar temperature dependence of the maximum divided voltage.

Applied Physics Letters•May 1, 2000•19 citations

YBa$_{2}$Cu$_{3}$O$_{7-\delta }$Single Flux Quantum Flip Flop Directly Written With a Focused Helium Ion Beam

Han Cai, Hao Li, Ethan Y. Cho +2 more

Superconducting logic circuits based on low transition temperature (Tc) are attractive due to their intrinsic low power consumption and high operating frequency. They have a wide variety of applications (particularly in future computing), but are difficult to use because they require cooling with liquid helium to operate. The current high Tclogic circuit based on YBa2Cu3O7-δ(YBCO) already has the ability to operate at a temperature above 4 K. However, this material is difficult to integrate into large-scale circuits by the traditional YBCO junction fabrication process. The limits of fabrication methods are the bottleneck stifling this material's potential for integration into logic circuits. As such, in this paper we aim to advance the state of the art in junction fabrication technology. Here we report the demonstration of a high Tcsuperconducting single flux quantum (SFQ) circuit made by a focused helium ion beam that is easily fabricated and can readily be incorporated into a large-scale integration with nano-scale junctions for future applications. An inductively coupled readout superconducting quantum interference device (SQUID) is employed to reduce the circuit complexity. The circuit parameters and performance are discussed.

IEEE Transactions on Applied Superconductivity•Apr 1, 2021•15 citations

All-high-T c superconductor rapid-single-flux-quantum circuit operating at ∼30 K

S.L. Shokhor, Boris E. Nadgorny, Michael Gurvitch +5 more

We have implemented a simple circuit of the rapid single-flux-quantum (RSFQ) logic family using a single-layer YBa2Cu3O7−x thin-film structure with 14 in-plane Josephson junctions formed by direct electron beam writing. The circuit includes two dc/SFQ converters, two Josephson transmission lines, a complete RS SFQ flip-flop, and an SFQ/dc converter (readout SQUID). Low-frequency testing has shown that the dc-current-biased circuit operates correctly and reliably at T∼30 K, a few degrees below the effective critical temperature of the junctions. Prospects for a further increase of the operation temperature and implementation of more complex RSFQ circuits are discussed in brief.

Applied Physics Letters•Nov 6, 1995•60 citations
Basic characteristics of a simple single-flux-quantum (SFQ) logic gate using high-Tc material and Josephson junction (NdBa2Cu3O7−δ and focused ion beam junction) have been investigated. The logic gate consists of an rf-superconducting quantum interference device (rf-SQUID) and a dc-SQUID. In the logic gate, elementary SFQ logic operations, such as generating SFQ (dc/SFQ) and providing simultaneous readout (SFQ/dc), have been confirmed up to 50 K. The temperature dependencies of the output voltage level and the critical current-normal resistance (IcRn) product were compared, and the decreasing tendency of the output voltage level for increasing temperature was found to be more rapid than that of the IcRn product.
The characteristics of a simple logic gate which consists of an rf-Superconducting QUantum Interference Device (SQUID) and dc-SQUID has been investigated in connection with the Single-Flux-Quantum (SFQ) logic operation and Josephson junction characteristics. The Josephson junctions were made of Neodymium Barium Copper Oxide thin film employing Focused Ion Beam technology. We confirmed the generating SFQ in the rf-SQUID and simultaneous read-out by the dc-SQUID up to 50 K. It has been found that the temperature dependence of output voltage level decreased more rapid than that of critical current normal resistance product. The origin of the discrepancy was studied using a phenomenological model of the Josephson junction and numerical simulation.
We have fabricated coplanar type dc SQUIDs using NdBa2Cu3Oy superconducting thin films and operated fundamental single-flux-quantum (SFQ) circuits. The Josephson junctions were made by the narrow-focused ion beam irradiation technique. For a 145 μm wide and 10 μm long logic SQUID having a critical current of 105 μA and an inductive parameter (βL) of 28, a store and a restore of the flux quantum have been demonstrated at temperatures of 4.2–30 K. These operations were performed with an input pulsewidth of 5 ns (5 ns was the shortest input pulse width available from our function generating equipment). These results show experimentally the possibility of high speed operation in all high-Tc superconducting digital circuits.
Operation principle of AND/OR logic has been realized in a coupled high-T c Superconducting QUantum Interference Device (SQUID). The device consists of rf- and dc-SQUID's. The logic operation is based on the nonlinear characteristics of the internal and external magnetic flux in the rf-SQUID. Results of the logic operation can be read out by the dc-SQUID. The device is made of NdBa2Cu3O7-δ superconducting thin film with superconducting weak links fabricated using a narrow-focused Ga-ion beam technology.
A rapid-single-flux-quantum toggle-flip-flop logic gate was fabricated using high-temperature superconducting interface-engineered Josephson junctions. It was shown that the gate can operate as a voltage divider up to 155 GHz at 15 K and 19 GHz at 27 K. At the same time, the temperature dependence of the IcRn product and the maximum divided voltage was compared. As a result, it was found that the ratio of these values is 0.4–0.1 for 15 K>T>27 K. Circuit simulation with noise sources reveals this peculiar temperature dependence of the maximum divided voltage.
YBa2_{2}2​Cu3_{3}3​O7−δ_{7-\delta }7−δ​Single Flux Quantum Flip Flop Directly Written With a Focused Helium Ion Beam
Superconducting logic circuits based on low transition temperature (Tc) are attractive due to their intrinsic low power consumption and high operating frequency. They have a wide variety of applications (particularly in future computing), but are difficult to use because they require cooling with liquid helium to operate. The current high Tclogic circuit based on YBa2Cu3O7-δ(YBCO) already has the ability to operate at a temperature above 4 K. However, this material is difficult to integrate into large-scale circuits by the traditional YBCO junction fabrication process. The limits of fabrication methods are the bottleneck stifling this material's potential for integration into logic circuits. As such, in this paper we aim to advance the state of the art in junction fabrication technology. Here we report the demonstration of a high Tcsuperconducting single flux quantum (SFQ) circuit made by a focused helium ion beam that is easily fabricated and can readily be incorporated into a large-scale integration with nano-scale junctions for future applications. An inductively coupled readout superconducting quantum interference device (SQUID) is employed to reduce the circuit complexity. The circuit parameters and performance are discussed.
We have implemented a simple circuit of the rapid single-flux-quantum (RSFQ) logic family using a single-layer YBa2Cu3O7−x thin-film structure with 14 in-plane Josephson junctions formed by direct electron beam writing. The circuit includes two dc/SFQ converters, two Josephson transmission lines, a complete RS SFQ flip-flop, and an SFQ/dc converter (readout SQUID). Low-frequency testing has shown that the dc-current-biased circuit operates correctly and reliably at T∼30 K, a few degrees below the effective critical temperature of the junctions. Prospects for a further increase of the operation temperature and implementation of more complex RSFQ circuits are discussed in brief.