Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Crosstalk-free operation of multielement superconducting nanowire single-photon detector array integrated with single-flux-quantum circuit in a 01 W Gifford–McMahon cryocooler

Taro Yamashita, Shigehito Miki, Hirotaka Terai, Kazumasa Makise, Zhen Wang

Published Jul 13, 2012• 48 citations
Publisher

Abstract

We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.

DOI
10.1364/ol.37.002982

Related papers

Crosstalk-free operation of multi-element SSPD array integrated with SFQ circuit in a 0.1 Watt GM cryocooler

Taro Yamashita, Shigehito Miki, Hirotaka Terai +2 more

We demonstrate the successful operation of a multi-element superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.

arXiv:1207.3902•Jul 17, 2012•5 citations

Parallel Bias and Readout Techniques Toward Realization of Large-Scale SSPD Array With SFQ Circuit

Taro Yamashita, Shigehito Miki, Hirotaka Terai +2 more

Toward the realization of a large-scale superconducting nanowire single-photon detector (SSPD) array system, we present the parallel bias operation of an SSPD array in which all elements are simultaneously biased in parallel by a single voltage source. We fabricated an SSPD array with uniform quality and implemented the device with/without single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. By applying the time-resolved readout setup, we measured histograms of time-correlated single-photon counts to verify the parallel bias operation of the SSPD array with conventional and SFQ readout techniques. As a result, we confirmed crosstalk-free parallel bias operation of the four-element SSPD array by conventional and SFQ readouts.

IEEE Transactions on Applied Superconductivity•Jan 11, 2013•6 citations

Demonstration of a Superconducting Nanowire Single-Photon Detector using Adiabatic Quantum-Flux-Parametron Logic in a 0.1-W Gifford-McMahon Cryocooler

Naoki Takeuchi, Taro Yamashita, Shigeyuki Miyajima +3 more

Superconducting nanowire single-photon detectors (SSPDs or SNSPDs) have superior performance and are thus used for many applications, such as quantum information and laser communications. Lately, much effort has been spent on the development of multi-pixel SSPD arrays to achieve single-photon-level imaging. SSPD arrays require efficient readout schemes that reduce the number of coaxial cables for reading out the SSPD pixels. In a previous study, we proposed a readout interface using adiabatic quantum-flux-parametron (AQFP) logic, which digitizes the information of an SSPD at cryogenic temperature. In this study, we show the first demonstration of an SSPD that is read out by the AQFP readout interface placed in the same 0.1-W Gifford-McMahon cryocooler. The measurement results show that the AQFP readout interface reads out the SSPD with low error rates. Also, it is found that the temperature of the sample stage does not change even after the AQFP readout interface is turned on, which indicates that the power and current required for the AQFP readout interface are sufficiently low for the implementation using a compact cryocooler.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•5 citations

Cryogenic Signal Processing Using Single-flux-quantum Circuit for High Performance Multi-pixel Superconducting Nanowire Single-photon Detectors

Hirotaka Terai, Shigehito Miki, Taro Yamashita +2 more

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•0 citations

Technologies for superconducting nanowire single-photon detector array system

Shigehito Miki, Taro Yamashita, Hirotaka Terai +2 more

We present the development of key technologies for realization of superconducting nanowire single photon detector array system, which enables high counting rates, and allow spatial and pseudo photon number resolution. Toward the realization of practical large-scale SSPD array system, primary issue is how to avoid heat flow into cryocooler system. One of the challenging tasks is the development of their readout electronics. In the conventional readout technique used for single pixel devices, the number of high-frequency coaxial cables increases proportionally with the number of arrays. This causes a significant increase in the heat load from room temperature, which makes the implementation of the SSPD arrays in a compact refrigerator difficult. To overcome this problem, we proposed applying readout electronics with superconducting single-flux-quantum (SFQ) logic circuitsWe show the implementation and successful operation of four pixels SSPD array connected to SFQ readout electronics with parallel bias scheme in a 0.1W GM cryocooler system.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jun 3, 2013•1 citation

Superconducting single photon detectors integrated with single flux quantum readout circuits in a cryocooler

Shigehito Miki, Hirotaka Terai, Taro Yamashita +4 more

We report the operation of superconducting single photon detectors (SSPDs) with integrated readout electronics based on a single-flux-quantum (SFQ) circuit. The SSPDs were connected to a SFQ readout circuit without bias tee in a cryocooler system, and detection efficiencies (DEs) were measured to verify their correct operation. The DE curves matched well with those measured by conventional readout electronics, and the maximum bias current for normal operation was increased. In addition, we confirmed that the SFQ circuit correctly merged the input signals from two SSPDs. SSPDs with a SFQ readout circuit demonstrated a favorable timing jitter of 50 ps.

Applied Physics Letters•Sep 12, 2011•55 citations
We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.
We demonstrate the successful operation of a multi-element superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems.
Toward the realization of a large-scale superconducting nanowire single-photon detector (SSPD) array system, we present the parallel bias operation of an SSPD array in which all elements are simultaneously biased in parallel by a single voltage source. We fabricated an SSPD array with uniform quality and implemented the device with/without single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. By applying the time-resolved readout setup, we measured histograms of time-correlated single-photon counts to verify the parallel bias operation of the SSPD array with conventional and SFQ readout techniques. As a result, we confirmed crosstalk-free parallel bias operation of the four-element SSPD array by conventional and SFQ readouts.
Superconducting nanowire single-photon detectors (SSPDs or SNSPDs) have superior performance and are thus used for many applications, such as quantum information and laser communications. Lately, much effort has been spent on the development of multi-pixel SSPD arrays to achieve single-photon-level imaging. SSPD arrays require efficient readout schemes that reduce the number of coaxial cables for reading out the SSPD pixels. In a previous study, we proposed a readout interface using adiabatic quantum-flux-parametron (AQFP) logic, which digitizes the information of an SSPD at cryogenic temperature. In this study, we show the first demonstration of an SSPD that is read out by the AQFP readout interface placed in the same 0.1-W Gifford-McMahon cryocooler. The measurement results show that the AQFP readout interface reads out the SSPD with low error rates. Also, it is found that the temperature of the sample stage does not change even after the AQFP readout interface is turned on, which indicates that the power and current required for the AQFP readout interface are sufficiently low for the implementation using a compact cryocooler.
Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.
We present the development of key technologies for realization of superconducting nanowire single photon detector array system, which enables high counting rates, and allow spatial and pseudo photon number resolution. Toward the realization of practical large-scale SSPD array system, primary issue is how to avoid heat flow into cryocooler system. One of the challenging tasks is the development of their readout electronics. In the conventional readout technique used for single pixel devices, the number of high-frequency coaxial cables increases proportionally with the number of arrays. This causes a significant increase in the heat load from room temperature, which makes the implementation of the SSPD arrays in a compact refrigerator difficult. To overcome this problem, we proposed applying readout electronics with superconducting single-flux-quantum (SFQ) logic circuitsWe show the implementation and successful operation of four pixels SSPD array connected to SFQ readout electronics with parallel bias scheme in a 0.1W GM cryocooler system.
We report the operation of superconducting single photon detectors (SSPDs) with integrated readout electronics based on a single-flux-quantum (SFQ) circuit. The SSPDs were connected to a SFQ readout circuit without bias tee in a cryocooler system, and detection efficiencies (DEs) were measured to verify their correct operation. The DE curves matched well with those measured by conventional readout electronics, and the maximum bias current for normal operation was increased. In addition, we confirmed that the SFQ circuit correctly merged the input signals from two SSPDs. SSPDs with a SFQ readout circuit demonstrated a favorable timing jitter of 50 ps.