Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

Laser Cooled Strontium Ion Source

Mary Lyon, James L. Archibald, Christopher Erickson, Dallin Durfee

Published Jan 1, 2010• 0 citations
Publisher

Abstract

We present a cold strontium ion source consisting of a magneto-optical trap (MOT) modified to create a Low Velocity Intense Source (LVIS). The slow beam of atoms is photo-ionized to produce a velocity-tunable ion source.
DOI
10.1364/fio.2010.jtua64

Related papers

Development of a Strontium-87 Ion Interferometer

Christopher Erickson

I present the construction of a low-velocity intense source (LVIS) of laser-cooled neutral strontium using permanent ring magnets. The LVIS consists of a magneto-optical trap from which cold strontium is extracted in a well-collimated beam. I also present the development and implementation of a full suite of low-noise, high-bandwidth laser control electronics including a microcontroller unit. This microcontroller remotely controls and monitors the current driver, temperature controller, and PID lock circuit for each diode laser simultaneously. The current driver output is accurate to within 2 micro-amps and repeatable to with a few nano-amps. The noise spectral density of the current driver hits a floor of 10^(-10) amps per root Hz at ~50 Hz and has a modulation bandwidth of ~50 MHz. The PID lock-circuit includes a scan-balancing option that we have used to scan an AR coated laser diode ~30 GHz mode-hop free. I describe the construction of an 80 mW frequency doubled 461 nm laser system using PPKTP for cooling and trapping neutral strontium in the LVIS. The LVIS, the electronics systems, and the 461 nm laser system represent major milestones on the way to producing a matter-wave interferometer using Sr-87 ions. The interferometer is based on an optical Raman transition between the hyperfine ground states of the Sr-87 ion. The ions will be produced by exciting the strontium LVIS beam to an auto-ionizing state in the continuum. In the interferometer two half-pi pulses of light and one pi pulse will be delivered to the ions to split and recombine their wave functions. I present calculations of the predicted sensitivity and a discussion of the possible applications. I present a method for locking a 407.8 nm laser to the 5s doublet S J=1/2 to 5p doublet P J=3/2 strontium ion transition in a neutral vapor. I present calculations for the necessary vacuum levels for the experiment and describe the preparation and assembly of the vacuum apparatus. The major vacuum system consists of two connected elastomer sealed chambers: one at 10^(-7) Torr and the other at 10^(-10) Torr separated by a region of low conductance. I present a Sr vapor cell constructed from standard CF fittings that allows the strontium to be heated to ~730 C, which can also be run as a thermal beam. I present a method for protecting the viewports on small-form alkali-earth vapor cells using lead or indium foil during the evaporation of oxide layers. Finally, I report on the current status of the experiment as well as detail future work on the apparatus.

•Jan 1, 2011•0 citations

Magneto-optical trap loaded from a low-velocity intense source

Chang Yong Park, Myung Sim Jun, D. Cho

We produced a slow atomic beam of rubidium with a low-velocity intense source (LVIS) and loaded a magneto-optical trap (MOT) in a connected chamber with the beam. The hole for the atomic beam allowed us to keep the MOT chamber at a much lower pressure than that of the LVIS. The LVIS produced an atomic beam with a continuous flux of (4.3±0.4)×109/s and an average velocity of only 11±3 m/s. The MOT captured the atoms with 67±15% efficiency, which was limited by the atomic-beam divergence. The MOT held 6×109 atoms with a typical trap-confinement time of 8 s.

Journal of the Optical Society of America B•Jun 1, 1999•12 citations

Two-dimensional magneto-optical trap as a source for cold strontium atoms

Ingo Nosske, Luc Couturier, Fachao Hu +6 more

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding ${10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}$ at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to ${10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.

Physical Review A•Nov 15, 2017•56 citations

Low-Velocity Intense Source of Atoms from a Magneto-optical Trap

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.

Physical Review Letters•Oct 14, 1996•269 citations

Transport dynamics in a high-brightness magneto-optical-trap Li ion source

Jamie Ryan Gardner, William McGehee, Mark D. Stiles +1 more

Laser-cooled gases offer an alternative to tip-based methods for generating high-brightness ion beams for focused ion beam applications. These sources produce ions by photoionization of ultracold neutral atoms, where the narrow velocity distribution associated with microkelvin-level temperatures results in a very low emittance, high-brightness ion beam. In a magneto-optical trap-based ion source, the brightness is ultimately limited by the transport of cold neutral atoms, which restricts the current that can be extracted from the ion-generating volume. We explore the dynamics of this transport in a 7Li magneto-optical trap ion source by performing time-dependent measurements of the depletion and refilling of the ionization volume in a pulsed source. An analytic microscopic model for the transport is developed, and this model shows excellent agreement with the measured results.

Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena•Sep 1, 2020•5 citations

Using laser-cooled atoms as a focused ion beam source

J. L. Hanssen, E. A. Dakin, Jabez J. McClelland +1 more

The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena•Nov 1, 2006•18 citations
I present the construction of a low-velocity intense source (LVIS) of laser-cooled neutral strontium using permanent ring magnets. The LVIS consists of a magneto-optical trap from which cold strontium is extracted in a well-collimated beam. I also present the development and implementation of a full suite of low-noise, high-bandwidth laser control electronics including a microcontroller unit. This microcontroller remotely controls and monitors the current driver, temperature controller, and PID lock circuit for each diode laser simultaneously. The current driver output is accurate to within 2 micro-amps and repeatable to with a few nano-amps. The noise spectral density of the current driver hits a floor of 10^(-10) amps per root Hz at ~50 Hz and has a modulation bandwidth of ~50 MHz. The PID lock-circuit includes a scan-balancing option that we have used to scan an AR coated laser diode ~30 GHz mode-hop free. I describe the construction of an 80 mW frequency doubled 461 nm laser system using PPKTP for cooling and trapping neutral strontium in the LVIS. The LVIS, the electronics systems, and the 461 nm laser system represent major milestones on the way to producing a matter-wave interferometer using Sr-87 ions. The interferometer is based on an optical Raman transition between the hyperfine ground states of the Sr-87 ion. The ions will be produced by exciting the strontium LVIS beam to an auto-ionizing state in the continuum. In the interferometer two half-pi pulses of light and one pi pulse will be delivered to the ions to split and recombine their wave functions. I present calculations of the predicted sensitivity and a discussion of the possible applications. I present a method for locking a 407.8 nm laser to the 5s doublet S J=1/2 to 5p doublet P J=3/2 strontium ion transition in a neutral vapor. I present calculations for the necessary vacuum levels for the experiment and describe the preparation and assembly of the vacuum apparatus. The major vacuum system consists of two connected elastomer sealed chambers: one at 10^(-7) Torr and the other at 10^(-10) Torr separated by a region of low conductance. I present a Sr vapor cell constructed from standard CF fittings that allows the strontium to be heated to ~730 C, which can also be run as a thermal beam. I present a method for protecting the viewports on small-form alkali-earth vapor cells using lead or indium foil during the evaporation of oxide layers. Finally, I report on the current status of the experiment as well as detail future work on the apparatus.
We produced a slow atomic beam of rubidium with a low-velocity intense source (LVIS) and loaded a magneto-optical trap (MOT) in a connected chamber with the beam. The hole for the atomic beam allowed us to keep the MOT chamber at a much lower pressure than that of the LVIS. The LVIS produced an atomic beam with a continuous flux of (4.3±0.4)×109/s and an average velocity of only 11±3 m/s. The MOT captured the atoms with 67±15% efficiency, which was limited by the atomic-beam divergence. The MOT held 6×109 atoms with a typical trap-confinement time of 8 s.
We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding 109atoms/s{10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to 109atoms/s{10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.
We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.
Laser-cooled gases offer an alternative to tip-based methods for generating high-brightness ion beams for focused ion beam applications. These sources produce ions by photoionization of ultracold neutral atoms, where the narrow velocity distribution associated with microkelvin-level temperatures results in a very low emittance, high-brightness ion beam. In a magneto-optical trap-based ion source, the brightness is ultimately limited by the transport of cold neutral atoms, which restricts the current that can be extracted from the ion-generating volume. We explore the dynamics of this transport in a 7Li magneto-optical trap ion source by performing time-dependent measurements of the depletion and refilling of the ionization volume in a pulsed source. An analytic microscopic model for the transport is developed, and this model shows excellent agreement with the measured results.
The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.