Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Superconducting device with transistor-like properties including large current amplification

Gianpiero Pepe, Giuseppe Ammendola, G. Peluso, Alberto C. Barone, L. Parlato, E. Esposito, R. Monaco, N. E. Booth

Published Jul 17, 2000• 28 citations
Publisher

Abstract

We have fabricated and studied a stacked superconducting double tunnel junction device with transistor-like properties. The intermediate electrode is a bilayer consisting of a Nb film together with an Al film that acts as a quasiparticle trap. Large current gains of more than 50 are observed at 4.2 K when the Al layer is normal. The operation is highly directional. Results are explained on the basis of trapping of quasiparticles from a superconductor into a normal metal, together with a conversion of relaxation energy into electronic excitations. Similar devices should have wide applications in low-temperature measurement and detection systems.

DOI
10.1063/1.127005

Related papers

A new superconducting device with transistor-like properties

Giovanni Piero Pepe, L. Parlato, Giuseppe Ammendola +4 more

A superconducting transistor with large current gain and bandwidth at low temperatures would have many applications. We have fabricated and tested a new three-terminal superconducting device with transistor-like properties at an operating temperature of 4.2 K. It is based on a stacked double tunnel junction structure where the intermediate film is a bilayer of superconducting Nb and an Al quasiparticle trap which can work either in the superconducting or in the normal metal state. Current amplification factors of up to 2.0 are observed at a temperature of 4.2 K when the Al is superconducting, while large current gains of more than 50 are observed when the Al is in the normal state. The device shows a high degree of unidirectionality. The results can be explained on the basis of the recently proposed QUAsiparticle TRApping TRANsistor, which should have wide applications in detection systems operating at low temperatures.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•2 citations

NON-EQUILIBRIUM IN JOSEPHSON JUNCTIONS: POSSIBLE TRANSISTOR-LIKE APPLICATIONS

Gianpiero Pepe, L. Parlato, Giuseppe Ammendola +5 more

Interest in superconducting transistors is due to some potential benefits of these devices, such as the possibility to have large current gain and bandwidth at low temperatures. In this work we present experimental results concerning with a new superconducting 3-terminal device showing true transistor-like properties at T=4.2K. It is a stacked double tunnel junction structure where the intermediate film is a bilayer of superconducting Nb with an Al quasiparticle trap which can be either in the superconducting or in the normal metal state. Current amplification factors of up to 2.0 are observed at a temperature of 4.2 K when the Al is superconducting. When the Al is in the normal state, large current gains of more than 50 are observed. The operation is highly directional, i.e. practically no effect is observed when the roles of the injector and detector junctions are reversed. The results are explained according to the recently proposed QUAsiparticle TRApping TRANnsistor model.

International Journal of Modern Physics B•Oct 30, 2000•2 citations

Josephson tunnel junction controlled by quasiparticle injection

Francesco Giazotto, Jukka P Pekola

A Josephson tunnel junction transistor based on quasiparticle injection is proposed. Its operation relies on the manipulation of the electron distribution in one of the junction electrodes. This is accomplished by injecting quasiparticle current through the junction electrode by two additional tunnel-coupled superconductors. Both large supercurrent enhancement and fast quenching can be achieved with respect to equilibrium by varying quasiparticle injection for proper temperature regimes and suitable superconductor combinations. Combined with large power gain, this makes the device attractive for applications where reduced noise and low-power dissipation are required.

arXiv:cond-mat/0405511•Journal of Applied Physics•Dec 23, 2004•42 citations

Double barrier long Josephson junctions with a contact to the intermediate superconducting layer

H. Kohlstedt, Alexey Vladimirovich Ustinov, F. Peter

We demonstrate a double barrier long Josephson tunnel junction device of overlap geometry with an external electric contact to the middle electrode. The junctions were fabricated with a standard Nb/Al-AlO/sub x//Nb process. To exhibit fluxon coupling effects in stacked junctions, the intermediate Nb layer thickness between two barriers has to be of the order of the London penetration depth, i.e. 90 nm for sputtered Nb films. By using a planarization process, we were able to avoid steep steps on the wafer and so to reduce the intermediate layer thickness to 90 nm. Double-junction stacks with areas from 10/spl times/10 /spl mu/m/sup 2/ to 20/spl times/600 /spl mu/m/sup 2/ were fabricated. In the best stacks, the difference in the critical currents of two junctions was less than 3%. Clear voltage locking effects were observed in current-voltage (I-V) characteristics.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•5 citations

Multi-Terminal Superconducting Nonequilibrium Device With a Ferromagnetic Screen

Ivan P. Nevirkovets, O. Chernyashevskyy, John B. Ketterson +1 more

We have fabricated and characterized double-barrier multi-terminal superconducting transistor-like devices with the Nb/Al/AlOx/Al/Nb/Ni/Al/AlOx/Al/Nb (S1IS2FIS3) structure, where S, I, and F refer to superconducting, insulating, and ferromagnetic layers, respectively. A thin ferromagnetic Ni layer screens the superconductivity of the middle Nb layer on the injector-barrier side, so that the Nb/Ni bilayer manifests itself as a superconductor in the current-voltage characteristic (I-V curve) of the acceptor S1IS2junction, but as a normal metal in the I-V curve of the injector S2FIS3junction. It is shown that this property allows for considerable improvement of the input-output isolation of the quasiparticle-injection devices as compared with that for the formerly reported quiteron.

IEEE Transactions on Applied Superconductivity•Nov 17, 2010•1 citation

Superconducting InGaAs junction field-effect transistors with Nb electrodes

Alan W. Kleinsasser, Thomas Nelson Jackson, David T. McInturff +3 more

We describe the design, fabrication, and characterization of superconducting In0.47Ga0.53As junction field-effect transistors (JFETs) with Nb source and drain electrodes. In0.47Ga0.53As has the advantage of combining large coherence length and high Schottky barrier transmission, making it a very attractive material on which to base superconducting FETs. At large voltages these devices behave as normal FETs in either enhancement or depletion modes, while at small voltages they act as Josephson junctions or super-Schottky diodes. Both normal and super- currents are controlled by the gate.

Applied Physics Letters•Oct 30, 1989•71 citations
We have fabricated and studied a stacked superconducting double tunnel junction device with transistor-like properties. The intermediate electrode is a bilayer consisting of a Nb film together with an Al film that acts as a quasiparticle trap. Large current gains of more than 50 are observed at 4.2 K when the Al layer is normal. The operation is highly directional. Results are explained on the basis of trapping of quasiparticles from a superconductor into a normal metal, together with a conversion of relaxation energy into electronic excitations. Similar devices should have wide applications in low-temperature measurement and detection systems.
A superconducting transistor with large current gain and bandwidth at low temperatures would have many applications. We have fabricated and tested a new three-terminal superconducting device with transistor-like properties at an operating temperature of 4.2 K. It is based on a stacked double tunnel junction structure where the intermediate film is a bilayer of superconducting Nb and an Al quasiparticle trap which can work either in the superconducting or in the normal metal state. Current amplification factors of up to 2.0 are observed at a temperature of 4.2 K when the Al is superconducting, while large current gains of more than 50 are observed when the Al is in the normal state. The device shows a high degree of unidirectionality. The results can be explained on the basis of the recently proposed QUAsiparticle TRApping TRANsistor, which should have wide applications in detection systems operating at low temperatures.
Interest in superconducting transistors is due to some potential benefits of these devices, such as the possibility to have large current gain and bandwidth at low temperatures. In this work we present experimental results concerning with a new superconducting 3-terminal device showing true transistor-like properties at T=4.2K. It is a stacked double tunnel junction structure where the intermediate film is a bilayer of superconducting Nb with an Al quasiparticle trap which can be either in the superconducting or in the normal metal state. Current amplification factors of up to 2.0 are observed at a temperature of 4.2 K when the Al is superconducting. When the Al is in the normal state, large current gains of more than 50 are observed. The operation is highly directional, i.e. practically no effect is observed when the roles of the injector and detector junctions are reversed. The results are explained according to the recently proposed QUAsiparticle TRApping TRANnsistor model.
A Josephson tunnel junction transistor based on quasiparticle injection is proposed. Its operation relies on the manipulation of the electron distribution in one of the junction electrodes. This is accomplished by injecting quasiparticle current through the junction electrode by two additional tunnel-coupled superconductors. Both large supercurrent enhancement and fast quenching can be achieved with respect to equilibrium by varying quasiparticle injection for proper temperature regimes and suitable superconductor combinations. Combined with large power gain, this makes the device attractive for applications where reduced noise and low-power dissipation are required.
We demonstrate a double barrier long Josephson tunnel junction device of overlap geometry with an external electric contact to the middle electrode. The junctions were fabricated with a standard Nb/Al-AlO/sub x//Nb process. To exhibit fluxon coupling effects in stacked junctions, the intermediate Nb layer thickness between two barriers has to be of the order of the London penetration depth, i.e. 90 nm for sputtered Nb films. By using a planarization process, we were able to avoid steep steps on the wafer and so to reduce the intermediate layer thickness to 90 nm. Double-junction stacks with areas from 10/spl times/10 /spl mu/m/sup 2/ to 20/spl times/600 /spl mu/m/sup 2/ were fabricated. In the best stacks, the difference in the critical currents of two junctions was less than 3%. Clear voltage locking effects were observed in current-voltage (I-V) characteristics.>
We have fabricated and characterized double-barrier multi-terminal superconducting transistor-like devices with the Nb/Al/AlOx/Al/Nb/Ni/Al/AlOx/Al/Nb (S1IS2FIS3) structure, where S, I, and F refer to superconducting, insulating, and ferromagnetic layers, respectively. A thin ferromagnetic Ni layer screens the superconductivity of the middle Nb layer on the injector-barrier side, so that the Nb/Ni bilayer manifests itself as a superconductor in the current-voltage characteristic (I-V curve) of the acceptor S1IS2junction, but as a normal metal in the I-V curve of the injector S2FIS3junction. It is shown that this property allows for considerable improvement of the input-output isolation of the quasiparticle-injection devices as compared with that for the formerly reported quiteron.
We describe the design, fabrication, and characterization of superconducting In0.47Ga0.53As junction field-effect transistors (JFETs) with Nb source and drain electrodes. In0.47Ga0.53As has the advantage of combining large coherence length and high Schottky barrier transmission, making it a very attractive material on which to base superconducting FETs. At large voltages these devices behave as normal FETs in either enhancement or depletion modes, while at small voltages they act as Josephson junctions or super-Schottky diodes. Both normal and super- currents are controlled by the gate.