Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Japanese Journal of Applied Physics

Pulse Excitation Method of Coherent-Population-Trapping Suitable for Chip-Scale Atomic Clock

Yuichiro Yano, Shigeyoshi Goka

Published Nov 9, 2012• 12 citations
Publisher

Abstract

We propose a pulse excitation method of coherent population trapping (CPT) with a liquid crystal optical modulator. Since liquid crystals enable reductions in size, weight, cost, and power consumption compared with acousto-optical modulators (AOMs), our method is suitable for chip-scale atomic clocks (CSACs). Experiments showed that pulse excitation with a liquid crystal modulator can narrow the CPT resonance linewidth and reduce the light shift effect using a 87Rb gas cell and the D1-line vertical-cavity surface-emitting laser (VCSEL). The CPT resonance linewidth and light shift sensitivity were less than one-eighth and one-third those for continuous excitation, respectively. They also showed that our method is comparable to that based on an AOM.

DOI
10.1143/jjap.51.122401

Related papers

CPT pulse excitation method based on VCSEL current modulation for miniature atomic clocks

Takumi Ide, Shigeyoshi Goka, Yuichiro Yano

We propose a coherent population trapping (CPT) pulsed-excitation method based on direct drive-current modulation of a vertical-cavity surface-emitting LASER for miniature atomic clocks (MACs). Because our method needs only a simple device configuration without optical external modulators, it is suitable for MACs, including chip-scale atomic-clocks. Reducing the size, cost, and power consumption is also possible. Additionally, we report on experimental results for Ramsey-CPT fringes excited using the proposed method.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2015•10 citations

Exploring Ramsey-coherent population trapping atomic clock realized with pulsed microwave modulated laser

Jing Yang, Yuan Tian, Bozhong Tan +2 more

A scheme for a Ramsey-coherent population trapping (CPT) atomic clock that eliminates the acousto-optic modulator (AOM) is proposed and experimentally studied. Driven by a periodically microwave modulated current, the vertical-cavity surface-emitting laser emits a continuous beam that switches between monochromatic and multichromatic modes. Ramsey-CPT interference has been studied with this mode-switching beam. In eliminating the AOM, which is used to generate pulsed laser in conventional Ramsey-CPT atomic clock, the physics package of the proposed scheme is virtually the same as that of a conventional compact CPT atomic clock, although the resource budget for the electronics will slightly increase as a microwave switch should be added. By evaluating and comparing experimentally recorded signals from the two Ramsey-CPT schemes, the short-term frequency stability of the proposed scheme was found to be 46% better than the scheme with AOM. The experimental results suggest that the implementation of a compact Ramsey-CPT atomic clock promises better frequency stability.

Journal of Applied Physics•Mar 7, 2014•15 citations

CPT chip-scale atomic clock with direct-modulation chip-external cavity diode laser

Jiqing Lian, Jie Miao, Tian Zhao +7 more

Chip-scale atomic clocks are critical for applications requiring compact, energy-efficient, and highly stable timing, such as GPS receivers and communication systems. Coherent population trapping (CPT)-based atomic clocks, which commonly use vertical-cavity surface-emitting lasers (VCSELs), have enabled significant miniaturization. However, their precision is limited by the broad linewidth of VCSELs. Alternative laser technologies, such as distributed Bragg reflector lasers, distributed feedback lasers, and external cavity diode lasers (ECDLs), offer potential improvements but face challenges in achieving compact size and adequate modulation bandwidth. This study presents a 795 nm chip-ECDL with a direct modulation bandwidth up to 4 GHz, specifically designed for CPT chip-scale atomic clocks. Based on the chip-ECDL, a CPT atomic clock with a compact volume of 19.4 ml and power consumption of 1.5 W has been developed. Under identical operating conditions, the CPT signal produced by the chip-ECDL exhibits a 34% reduction in linewidth and a 1.14-fold increase in contrast compared to a VCSEL-based clock. Demonstrating short-term stability better than 5×10−11τ−1/2(1 s<τ<2000 s) and reaching a best stability of 6.6×10−13 at 2000 s, this work represents the application of an ECDL in a CPT chip-scale clock, advancing the development of next-generation, high-performance chip-scale atomic clocks.

Applied Physics Letters•Jun 2, 2025•9 citations

Coherent Population Trapped Spectrum Based on Chip-Scale External Cavity Diode Laser

Tian Zhao, Jiqing Lian, S.K. Wu +5 more

This article reports a scheme for obtaining coherent population trapping (CPT) spectrum based on a chip-scale external cavity diode laser (CECDL). The CPT spectrum linewidth is 680Hz. Compared to the scheme using vertical cavity surface emitting laser (VCSEL), CECDL has a comparable small volume and higher laser power of 14mW and narrower linewidth of 270kHz. This is beneficial for improving the frequency stability performance of CPT chip-scale atomic clocks.

European Frequency and Time Forum•Jun 25, 2024•1 citation

Study on characteristics of coherent population trapping spectral line for chip-scale atomic clock

Yi Yin, Yi Zhang, Tan Bo-Zhong +2 more

To Obtain an appropriate coherent population trapping (CPT) signal through a miniature atomic vapor cell is one of the key steps to implement a chip-scale atomic clock (CSAC). In the present experiment, the high S/N differential CPT spectral line has been achieved with a miniature atomic vapor cell through modulating the laser and extracting 87Rb atom laser interacting signal using the phase sensitive demodulation technique. With the spectral line, the dependence of CPT signal on the working parameters and the dependence of frequency stability of CSAC on the quality of the CPT signal have been studied; the obtained experimental results agree well with the theoretical prediction, which can be used as the recommended working parameters for CSAC. The methods exploited in the experiment can be implemented in the resource of a CSAC, therefore this experiment explores for CSAC the practical approaches of performance optimization.

Acta Physica Sinica•Jan 1, 2015•1 citation

VCSELs for atomic clocks

Darwin K. Serkland, Gregory M. Peake, K.M. Geib +4 more

The spectroscopic technique of coherent population trapping (CPT) enables an all-optical interrogation of the groundstate hyperfine splitting of cesium (or rubidium), compared to the optical-microwave double resonance technique conventionally employed in atomic frequency standards. All-optical interrogation enables the reduction of the size and power consumption of an atomic clock by two orders of magnitude, and vertical-cavity surface-emitting lasers (VCSELs) are preferred optical sources due to their low power consumption and circular output beam. Several research teams are currently using VCSELs for DARPA's chip-scale atomic clock (CSAC) program with the goal of producing an atomic clock having a volume < 1 cm^3, a power consumption < 30 mW, and an instability (Allan deviation) < 1x10^-11 during a 1-hour averaging interval. This paper describes the VCSEL requirements for CPT-based atomic clocks, which include single mode operation, single polarization operation, modulation bandwidth > 4 GHz, low power consumption (for the CSAC), narrow linewidth, and low relative intensity noise (RIN). A significant manufacturing challenge is to reproducibly obtain the required wavelength at the specified VCSEL operating temperature and drive current. Data are presented that show the advantage of operating at the D1 (rather than D2) resonance of the alkali atoms. Measurements of VCSEL linewidth will be discussed in particular, since atomic clock performance is especially sensitive to this parameter.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 9, 2006•60 citations
We propose a pulse excitation method of coherent population trapping (CPT) with a liquid crystal optical modulator. Since liquid crystals enable reductions in size, weight, cost, and power consumption compared with acousto-optical modulators (AOMs), our method is suitable for chip-scale atomic clocks (CSACs). Experiments showed that pulse excitation with a liquid crystal modulator can narrow the CPT resonance linewidth and reduce the light shift effect using a 87Rb gas cell and the D1-line vertical-cavity surface-emitting laser (VCSEL). The CPT resonance linewidth and light shift sensitivity were less than one-eighth and one-third those for continuous excitation, respectively. They also showed that our method is comparable to that based on an AOM.
We propose a coherent population trapping (CPT) pulsed-excitation method based on direct drive-current modulation of a vertical-cavity surface-emitting LASER for miniature atomic clocks (MACs). Because our method needs only a simple device configuration without optical external modulators, it is suitable for MACs, including chip-scale atomic-clocks. Reducing the size, cost, and power consumption is also possible. Additionally, we report on experimental results for Ramsey-CPT fringes excited using the proposed method.
A scheme for a Ramsey-coherent population trapping (CPT) atomic clock that eliminates the acousto-optic modulator (AOM) is proposed and experimentally studied. Driven by a periodically microwave modulated current, the vertical-cavity surface-emitting laser emits a continuous beam that switches between monochromatic and multichromatic modes. Ramsey-CPT interference has been studied with this mode-switching beam. In eliminating the AOM, which is used to generate pulsed laser in conventional Ramsey-CPT atomic clock, the physics package of the proposed scheme is virtually the same as that of a conventional compact CPT atomic clock, although the resource budget for the electronics will slightly increase as a microwave switch should be added. By evaluating and comparing experimentally recorded signals from the two Ramsey-CPT schemes, the short-term frequency stability of the proposed scheme was found to be 46% better than the scheme with AOM. The experimental results suggest that the implementation of a compact Ramsey-CPT atomic clock promises better frequency stability.
Chip-scale atomic clocks are critical for applications requiring compact, energy-efficient, and highly stable timing, such as GPS receivers and communication systems. Coherent population trapping (CPT)-based atomic clocks, which commonly use vertical-cavity surface-emitting lasers (VCSELs), have enabled significant miniaturization. However, their precision is limited by the broad linewidth of VCSELs. Alternative laser technologies, such as distributed Bragg reflector lasers, distributed feedback lasers, and external cavity diode lasers (ECDLs), offer potential improvements but face challenges in achieving compact size and adequate modulation bandwidth. This study presents a 795 nm chip-ECDL with a direct modulation bandwidth up to 4 GHz, specifically designed for CPT chip-scale atomic clocks. Based on the chip-ECDL, a CPT atomic clock with a compact volume of 19.4 ml and power consumption of 1.5 W has been developed. Under identical operating conditions, the CPT signal produced by the chip-ECDL exhibits a 34% reduction in linewidth and a 1.14-fold increase in contrast compared to a VCSEL-based clock. Demonstrating short-term stability better than 5×10−11τ−1/2(1 s<τ<2000 s) and reaching a best stability of 6.6×10−13 at 2000 s, this work represents the application of an ECDL in a CPT chip-scale clock, advancing the development of next-generation, high-performance chip-scale atomic clocks.
To Obtain an appropriate coherent population trapping (CPT) signal through a miniature atomic vapor cell is one of the key steps to implement a chip-scale atomic clock (CSAC). In the present experiment, the high S/N differential CPT spectral line has been achieved with a miniature atomic vapor cell through modulating the laser and extracting 87Rb atom laser interacting signal using the phase sensitive demodulation technique. With the spectral line, the dependence of CPT signal on the working parameters and the dependence of frequency stability of CSAC on the quality of the CPT signal have been studied; the obtained experimental results agree well with the theoretical prediction, which can be used as the recommended working parameters for CSAC. The methods exploited in the experiment can be implemented in the resource of a CSAC, therefore this experiment explores for CSAC the practical approaches of performance optimization.
The spectroscopic technique of coherent population trapping (CPT) enables an all-optical interrogation of the groundstate hyperfine splitting of cesium (or rubidium), compared to the optical-microwave double resonance technique conventionally employed in atomic frequency standards. All-optical interrogation enables the reduction of the size and power consumption of an atomic clock by two orders of magnitude, and vertical-cavity surface-emitting lasers (VCSELs) are preferred optical sources due to their low power consumption and circular output beam. Several research teams are currently using VCSELs for DARPA's chip-scale atomic clock (CSAC) program with the goal of producing an atomic clock having a volume < 1 cm^3, a power consumption < 30 mW, and an instability (Allan deviation) < 1x10^-11 during a 1-hour averaging interval. This paper describes the VCSEL requirements for CPT-based atomic clocks, which include single mode operation, single polarization operation, modulation bandwidth > 4 GHz, low power consumption (for the CSAC), narrow linewidth, and low relative intensity noise (RIN). A significant manufacturing challenge is to reproducibly obtain the required wavelength at the specified VCSEL operating temperature and drive current. Data are presented that show the advantage of operating at the D1 (rather than D2) resonance of the alkali atoms. Measurements of VCSEL linewidth will be discussed in particular, since atomic clock performance is especially sensitive to this parameter.