Ultracold gases in ring geometries hold promise for significant improvements of gyroscopic sensitivity. Recent experiments have realized atomic and molecular storage rings with radii in the centimeter range, sizes whose practical use in inertial sensors requires velocities significantly in excess of typical recoil velocities. We use a combination of analytical and numerical techniques to study the coherent acceleration of matter waves in circular waveguides, with particular emphasis on its impact on single-mode propagation. In the simplest case we find that single-mode propagation is best maintained by the application of time-dependent acceleration force with the temporal profile of a Blackmann pulse. We also assess the impact of classical noise on the acceleration process.
Ultracold gases in ring geometries hold promise for significant improvements of gyroscopic sensitivity. Recent experiments have realized atomic and molecular storage rings with radii in the centimeter range, sizes whose practical use in inertial sensors requires velocities significantly in excess of typical recoil velocities. We use a combination of analytical and numerical techniques to study the coherent acceleration of matter waves in circular waveguides, with particular emphasis on its impact on single-mode propagation. In the simplest case we find that single-mode propagation is best maintained by the application of time-dependent acceleration force with the temporal profile of a Blackmann pulse. We also assess the impact of classical noise on the acceleration process.
Abstract Some of the most sensitive and precise measurements—for example, of inertia1, gravity2 and rotation3—are based on matter-wave interferometry with free-falling atomic clouds. To achieve very high sensitivities, the interrogation time has to be very long, and consequently the experimental apparatus needs to be very tall (in some cases reaching ten or even one hundred metres) or the experiments must be performed in microgravity in space4–7. Cancelling gravitational acceleration (for example, in atomtronic circuits8, 9 and matter-wave guides10) is expected to result in compact devices with extended interrogation times and therefore increased sensitivity. Here we demonstrate smooth and controllable matter-wave guides by transporting Bose–Einstein condensates (BECs) over macroscopic distances. We use a neutral-atom accelerator ring to bring BECs to very high speeds (16 times their sound velocity) and transport them in a magnetic matter-wave guide for 15 centimetres while fully preserving their internal coherence. The resulting high angular momentum of more than 40, 000ħ per atom (where ħ is the reduced Planck constant) gives access to the higher Landau levels of quantum Hall states, and the hypersonic velocities achieved, combined with our ability to control potentials with picokelvin precision, will facilitate the study of superfluidity and give rise to tunnelling and a large range of transport regimes of ultracold atoms11–13. Coherent matter-wave guides are expected to enable interaction times of several seconds in highly compact devices and lead to portable guided-atom interferometers for applications such as inertial navigation and gravity mapping.
The possibility of generating vortices during matter-wave propagation through microstructures is examined. Vortices can arise solely due to wave interference in low-density ultracold atom clouds, and do not require any atom--atom (nonlinear) interactions. The properties of these ``interference vortices'' are understood from a simple two-mode model in a straight waveguide. This model is then applied to vortex creation in a circular bend since a circular waveguide bend is one of the simplest atom optical elements that can induce mode excitations. Time-independent and time-dependent analyses are used to investigate vortex creation and dynamics in these systems.
This dissertation presents a theoretical analysis of methods to manipulate and control the momentum state of coherent matter waves. Of particular interest is the coherent acceleration of a quantum-degenerate atomic system, which, as a direct consequence of the form of the de Broglie wavelength, results in tunable source of matter waves. Such sources are of considerable importance for a number of potential applications in the field of atom optics, including the development of highly sensitive gyroscopes, accelerometers, gravity gradiometers or atom lithography and holography, as well as for potential uses in integrated atom optics. Our basic setup consists of a Bose-Einstein condensate in a moving optical lattice created by a pair of frequency-chirped counterpropagating laser beams acting as a "conveyor belt'' for ultracold atoms. Whereas the acceleration of ultracold but non-condensed atoms in such a lattice was demonstrated earlier, we extend this scheme to the case of Bose-Einstein condensates. As a first step, we investigate the acceleration efficiency for various acceleration rates and nonlinear interaction strengths. We find parameter regimes where efficient acceleration is possible, i.e. all atoms are accelerated to the same velocity and the initially sharp momentum distribution and thus its monochromaticity is preserved. However, in general we identify switch-on effects of the lattice, dynamical loss and nonlinear effects to be responsible for deterioration of the monochromaticity of the condensate: On the one hand, switch-on effects and dynamical loss induce a coupling of the initially populated momentum mode to other modes, thereby distributing the momentum over several modes. On the other hand, the nonlinear release of mean field energy during the acceleration process causes the mode profile itself to broaden, also leading to a contamination of the initial monochromaticity. As a second step, we discuss ways to improve this scheme by removing the restriction of constant accelerations. We employ genetic algorithms to optimize the time-dependent motion of the lattice. We show that with such flexibility, it is possible to achieve a fast and highly efficient coherent acceleration of condensates, even when mean-field effects cannot be neglected. The same scheme also enables the creation of arbitrary coherent superposition states in momentum space. The technique is thus suitable for building highly efficient momentum state beam splitters. In addition to simply accelerating condensates, it is desirable for many potential applications to transport atomic wave packets without dispersion over large distances. This can be achieved by launching bright atomic solitons, where the effects of the nonlinearity counterbalance the dispersion. Placing a Bose-Einstein condensate with repulsive interactions in a lattice, one can create a negative effective mass. Under these circumstances bright and stable soliton solutions exist, so-called gap solitons. After a careful analysis of the soliton properties, we use the tools we developed for condensate acceleration and demonstrate two feasible schemes to excite the solitons. Experimental data released after publication of our results demonstrating the acceleration of Bose-Einstein condensates in moving lattices and the very recent observation of atomic gap solitons indicates that our theoretical analysis was timely and indeed experimentally feasible. As an outlook, we briefly comment on a new direction in the field of atom optics that holds promise for future applications: the use of quantum degenerate Fermi gases. In atomic as well as in optical physics one often encounters situations where there exists a coupling between several modes of a system. Here, we illustrate the "toy model'' of a fermionic coupler where transitions between two internal states are induced by Raman coupling. Due to Fermi statistics and interatomic interactions, this is a simple example of a nonlinear multimode coupler. Investigation of this system consisting of only a few fermions already clearly illustrates the basic differences between bosonic and fermionic dynamics and sheds light on the role of two-body collisions. Understanding the basic mechanisms of this system is a first step towards more sophisticated coherent control of fermionic systems.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.
We examine the prospects of utilizing matter-wave Fabry-Pérot interferometers for enhanced inertial sensing applications. Our study explores such tunneling-based sensors for the measurement of accelerations in two configurations: (a) a transmission setup, where the initial wave packet is transmitted through the cavity and (b) an out-tunneling scheme with intra-cavity generated initial states lacking a classical counterpart. We perform numerical simulations of the complete dynamics of the quantum wave packet, investigate the tunneling through a matter-wave cavity formed by realistic optical potentials and determine the impact of interactions between atoms. As a consequence we estimate the prospective sensitivities to inertial forces for both proposed configurations and show their feasibility for serving as inertial sensors.
One of the main residual limitations of inertial sensors based on atom interferometry stems from laser beam distortions, which cause parasitic phase shifts and non-homogeneous matter-light couplings. Here we present numerical simulations, accompanied by analytical calculations, which quantify the impact of these effects in a cold atom gradiometer. We demonstrate that the propagation of interferometric laser beam aberrations, combined with initial asymmetry and significant time-of-flight expansion of the the two atomic sources, limit the common-mode rejection of phase noise in a differential configuration. The resulting deviations in gravitational acceleration and its gradient are within reach of current experimental devices. Our study allows us to evaluate the surface quality requirements for retroreflective optics in cold-atom gradiometers of various baselines, and can be extended to other sensors based on different interferometer geometries.