Cooperative relay is considered as an efficient scheme to improve the physical layer security of a wireless relay system in the presence of eavesdroppers. In this paper, multiple-level relay scheme is proposed. We consider relay weight design for secrecy rate maximization subject to a power constraint. The results show that a higher achievable secrecy rate is achieved in the two-level relay channel than that of the one-level relay channel when the destination node is far away from the source node. Therefore, the performance of the two-level relays channel is generally better under the circumstances of the long distance transmission.
Cooperative relay is considered as an efficient scheme to improve the physical layer security of a wireless relay system in the presence of eavesdroppers. In this paper, multiple-level relay scheme is proposed. We consider relay weight design for secrecy rate maximization subject to a power constraint. The results show that a higher achievable secrecy rate is achieved in the two-level relay channel than that of the one-level relay channel when the destination node is far away from the source node. Therefore, the performance of the two-level relays channel is generally better under the circumstances of the long distance transmission.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
To improve physical (PHY) layer security of a wireless relay system in the presence of an eavesdropper, a two-phase cooperative relaying scheme is investigated in this paper. In phase I, the source transmits confidential message, simultaneously, it cooperates with the friendly jammers and destination to create jamming signal at the eavesdropper without affecting the forwarding relay which is preselected. In phase II, the forwarding relay retransmits the decoded signal, meanwhile, the particular relay cooperates with the friendly jammers to create jamming signal at the eavesdropper without affecting the destination. We focus on the investigation of optimal power allocation for maximizing achievable secrecy rate subject to a total power constraint. Optimal relay selection and suboptimal relay selection schemes are also proposed. It is shown that as the number of relays increases, both secrecy rate and the performance of suboptimal relay selection scheme improve significantly. Numerical results are presented to validate the derived analytical results and compare them to existing work.
We consider a cooperative wireless network in the presence of one or more eavesdroppers, and exploit node cooperation for achieving physical (PHY) layer based security. Two different cooperation schemes are considered. In the first scheme, cooperating nodes retransmit a weighted version of the source signal in a decode-and-forward (DF) fashion. In the second scheme, referred to as cooperative jamming (CJ), while the source is transmitting, cooperating nodes transmit weighted noise to confound the eavesdropper. We investigate two objectives: i) maximization of the achievable secrecy rate subject to a total power constraint and ii) minimization of the total power transmit power under a secrecy rate constraint. For the first design objective, we obtain the exact solution for the DF scheme for the case of a single or multiple eavasdroppers, while for the CJ scheme with a single eavesdropper we reduce the multivariate problem to a problem of one variable. For the second design objective, existing work introduces additional constraints in order to reduce the degree of difficulty, thus resulting in suboptimal solutions. Our work raises those constraints, and obtains either an analytical solution for the DF scheme with a single eavesdropper, or reduces the multivariate problem to a problem of one variable for the CJ scheme with a single eavesdropper. Numerical results are presented to illustrate the proposed results and compare them to existing work.
Cooperative relaying and jamming are two efficient schemes to improve the physical-layer security of a wireless transmission in the presence of an eavesdropper. In this paper, we propose a hybrid cooperative relaying and jamming mechanism to enhance the security of a two-way relay network, where some intermediate nodes adopt distributed beamforming to improve the channel quality to legitimate terminals and others jam the eavesdropper, simultaneously. Subjected to the more practical per-node power constraint of each cooperative node, we propose a secrecy scheme to maximize the secrecy sum rate of the two terminals. It is shown that the problem can be transformed into a semi-definite programming (SDP) problem with an additional rank-1 constraint. We then propose a penalty function method and an iterative algorithm to solve such a problem efficiently, instead of the popular semi-definite relaxation (SDR) and randomization technique in the previous literature. Simulations show that the proposed hybrid schemes greatly improve the security of the two-way relay networks.
In this paper, we investigate physical-layer transmission security problem of a two-way relay wireless network consisting of two legitimate terminal nodes who wants to communicate with each other in presence of one eavesdropper, with help of N intermediate nodes. We propose a cooperative relaying and jamming strategy, which selecting one intermediate node to create intentional interference upon the eavesdropper, while other K = N -1 intermediate nodes operating in relay mode and assisting the source nodes to deliver data to their corresponding destinations using an amplify-and-forward (AF) protocol. All N intermediate nodes in this system are under a per-node power constraint. When K ≥ 3, we propose two different system design criteria based on null-space beamforming, to maximize secrecy sum rate by rate-splitting method with a bisection numerical algorithm iteratively getting the maximal secrecy sum rate, or to maximize the minimum rate between the two terminals. And we also propose the modified security schemes when the number of intermediate nodes is not enough for the previously mentioned schemes (K <; 3).