Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Reduction of modal length using Josephson junction array confined cavity

Jyh-Yang Wang, Saxon Liou, Yu‐Cheng Chang, Teik‐Hui Lee, Kuan‐Wen Chen, Ming-Chou Lin, Cen-Shawn Wu, Watson Kuo, Chii‐Dong Chen

Published Apr 8, 2013• 1 citation
Publisher

Abstract

We propose an architecture in which the coupling between a cavity and superconducting qubits is enhanced by reducing the cavity modal length. The cavity is connected to outside transmission lines at the both ends by two short Josephson junction arrays. The latter plays a role of distributed reflector, which can provide an arbitrary negative phase to the reflected wave below its photonic bandgap. With this phase contribution from the Josephson junction arrays, we show, in the context of Fabry-Perot resonance, that the modal length can be 2 orders shorter than the wavelength.

DOI
10.1063/1.4801503

Related papers

Microwave photonics with Josephson junction arrays: Negative refraction index and entanglement through disorder

David Zueco, J. J. Mazo, E. Solano +1 more

We study different architectures for a photonic crystal in the microwave regime based on superconducting transmission lines interrupted by Josephson junctions, both in one and two dimensions. A study of the scattering properties of a single junction in the line shows that the junction behaves as a perfect mirror when the photon frequency matches the Josephson plasma frequency. We generalize our calculations to periodic arrangements of junctions, demonstrating that they can be used for tunable band engineering, forming what we call a quantum circuit crystal. Two applications are discussed in detail. In a two-dimensional structure we demonstrate the phenomenon of negative refraction. We finish by studying the creation of stationary entanglement between two superconducting qubits interacting through a disordered media.

arXiv:1110.1184•Physical Review B•Jul 5, 2012•39 citations

From Josephson junction metamaterials to tunable pseudo-cavities

David Zueco, C Fernández-Juez, Jorge Yago Malo +4 more

The scattering through a Josephson junction interrupting a superconducting line is revisited including power leakage. We discuss also how to make tunable and broadband resonant mirrors by concatenating junctions. As an application, we show how to construct cavities using these mirrors, thus connecting two research fields: JJ quantum metamaterials and coupled cavity arrays. We finish by discussing the first non-linear corrections to the scattering and their measurable effects.

arXiv:1305.4844•Superconductor Science and Technology•Jun 6, 2013•12 citations

Microwave Cooling of Josephson Plasma Oscillations

Jan Hammer, M. Aprili, Ivana Petković

An extended Josephson junction can be described as a microwave cavity coupled to a Josephson oscillator. This is formally equivalent to a Fabry-Perot cavity with a freely vibrating mirror, where it has been shown that radiation pressure from photons in the cavity can reduce (increase) the vibrations of the mirror, effectively cooling (heating) it. We demonstrate that, similarly, the superconducting phase difference across a Josephson junction-the Josephson phase-can be "cooled" or "heated" by microwave excitation of the junction and that both these effects increase with microwave power.

Physical Review Letters•Jun 29, 2011•8 citations

A method for self-radiation of Josephson junction arrays

Zh Wang, Xinjie Zhao, H W Yue +6 more

We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.

Superconductor Science and Technology•May 4, 2010•12 citations

Parametric amplification in a Josephson junction array Fabry-Pérot cavity

Javier Navarro Montilla, Nikita S. Klimovich, A. Barbier +2 more

Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.

Physica Scripta•Sep 1, 2025•1 citation

Strong coupling of cavity QED with current-biased flux qubit

Mun Dae Kim, Kyungsun Moon

We propose a scheme for a cavity quantum electrodynamics (QED) architecture for a current-biased superconducting flux qubit with three Josephson junctions. The qubit operation is performed by using a bias current coming from the current mode of the circuit resonator. If the phase differences of junctions are to be coupled with the bias current, the Josephson junctions should be arranged in an asymmetric way in the qubit loop. Our QED scheme provides a strong coupling between the flux qubit and the transmission line resonator of the circuit.

•May 11, 2010•0 citations
We propose an architecture in which the coupling between a cavity and superconducting qubits is enhanced by reducing the cavity modal length. The cavity is connected to outside transmission lines at the both ends by two short Josephson junction arrays. The latter plays a role of distributed reflector, which can provide an arbitrary negative phase to the reflected wave below its photonic bandgap. With this phase contribution from the Josephson junction arrays, we show, in the context of Fabry-Perot resonance, that the modal length can be 2 orders shorter than the wavelength.
We study different architectures for a photonic crystal in the microwave regime based on superconducting transmission lines interrupted by Josephson junctions, both in one and two dimensions. A study of the scattering properties of a single junction in the line shows that the junction behaves as a perfect mirror when the photon frequency matches the Josephson plasma frequency. We generalize our calculations to periodic arrangements of junctions, demonstrating that they can be used for tunable band engineering, forming what we call a quantum circuit crystal. Two applications are discussed in detail. In a two-dimensional structure we demonstrate the phenomenon of negative refraction. We finish by studying the creation of stationary entanglement between two superconducting qubits interacting through a disordered media.
An extended Josephson junction can be described as a microwave cavity coupled to a Josephson oscillator. This is formally equivalent to a Fabry-Perot cavity with a freely vibrating mirror, where it has been shown that radiation pressure from photons in the cavity can reduce (increase) the vibrations of the mirror, effectively cooling (heating) it. We demonstrate that, similarly, the superconducting phase difference across a Josephson junction-the Josephson phase-can be "cooled" or "heated" by microwave excitation of the junction and that both these effects increase with microwave power.
We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.
Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.
We propose a scheme for a cavity quantum electrodynamics (QED) architecture for a current-biased superconducting flux qubit with three Josephson junctions. The qubit operation is performed by using a bias current coming from the current mode of the circuit resonator. If the phase differences of junctions are to be coupled with the bias current, the Josephson junctions should be arranged in an asymmetric way in the qubit loop. Our QED scheme provides a strong coupling between the flux qubit and the transmission line resonator of the circuit.