© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Journal of Applied Physics

Cavity quantum electrodynamics for photon mediated transfer of quantum states

Md. Mijanur Rahman, P. K. Choudhury

Published Jun 1, 2011• 10 citations

Abstract

An enhanced approach for transferring quantum state between quantum nodes is proposed wherein photons serve as the information carrier. Each node consists of a Rubidium (87Rb) atom trapped inside a two-mode optical cavity. The approach is based on cavity quantum electrodynamics (QED) wherein a system of lasers is applied on the atom in order to generate photon through Raman transition. Logic states ‘0’ and ‘1’ are represented by two subspaces of the hyperfine energy levels with magnetic sub-levels of 87Rb atom. A static magnetic field is applied upon the atoms so that the hyperfine states of 87Rb atom are split into the magnetic sub-levels (due to Zeeman effect). Depending on the logic state of the transmit node, a right- or left-circularly polarized photon with designated frequency is produced through a cavity assisted Raman process. When the photon is received at the receive node via an optical fiber, the logic state of the transmit node is restored (through a cavity QED process) into the receive node. A desirable feature of the approach is that, during the transmission of logic state, the transmit node itself should not significantly change its quantum state; this is successfully validated through simulations.

DOI: 10.1063/1.3596522

Related papers

POLARIZED PHOTON GENERATION FOR THE TRANSPORT OF QUANTUM STATES: A CLOSED-SYSTEM SIMULATION APPROACH

Md. Mijanur Rahman, P. K. Choudhury

A novel approach for logic state dependent generation of polarized photon is proposed, where the logic states '0' and '1' are represented by two sub-spaces in the Hilbert space of the hyperflne states of rubidium atom ( 87 Rb). Each subspace consists of a ground state, an intermediate state and an excited state. The atom is placed at the center of a two-mode cavity, and the cavity modes correspond to frequencies of the generated photon. Photon generation process involves raising the atom to the excited state within the corresponding subspace and letting it decay back to the initial (ground) state, emitting thereby a photon of logic state dependent polarization. In order to keep the driving laser frequencies far ofi from the cavity mode frequencies, the atom is raised to the excited state in two steps | flrst from the ground state to the intermediate state and then from the intermediate state to the excited state. Polarization states of the photon represent the logic states, and can be used to transport logic from one node to another of the quantum network.

Progress In Electromagnetics Research M•Jan 1, 2009•9 citations

Theory of Raman transitions in cavity QED

A. David. Boozer

We present two schemes for driving Raman transitions between the ground-state hyperfine manifolds of a single atom trapped within a high-finesse optical cavity. In both schemes, the Raman coupling is generated by standing-wave fields inside the cavity, thus circumventing the optical access limitations that free-space Raman schemes must face in a cavity system. These cavity-based Raman schemes can be used to coherently manipulate both the internal and motional degrees of freedom of the atom, and thus provide powerful tools for studying cavity quantum electrodynamics. We give a detailed theoretical analysis of each scheme, both for a three-level atom and for a multilevel cesium atom. In addition, we show how these Raman schemes can be used to cool the axial motion of the atom to the quantum ground state, and we perform computer simulations of the cooling process.

arXiv:0807.0931•Physical Review A•Sep 9, 2008•4 citations

Scheme for generating a sequence of single photons of alternating polarization

Tatjana Wilk, Holger Specht, S. C. Webster +2 more

Single-photons of well-defined polarization that are deterministically generated in a single spatio-temporal field mode are the key to the creation of multi-partite entangled states in photonic networks. Here, we present a novel scheme to produce such photons from a single atom in an optical cavity, by means of vacuum-stimulated Raman transitions between the Zeeman substates of a single hyperfine state. Upon each transition, a photon is emitted into the cavity, with a polarization that depends on the direction of the Raman process.

arXiv:quant-ph/0603083•Journal of Modern Optics•Aug 21, 2006•16 citations

Polarization-Controlled Single Photons

Tatjana Wilk, S. C. Webster, Holger Specht +2 more

Vacuum-stimulated Raman transitions are driven between two magnetic substates of a 87Rb atom strongly coupled to an optical cavity. A magnetic field lifts the degeneracy of these states, and the atom is alternately exposed to laser pulses of two different frequencies. This produces a stream of single photons with alternating circular polarization in a predetermined spatiotemporal mode. MHz repetition rates are possible as no recycling of the atom between photon generations is required. Photon indistinguishability is tested by time-resolved two-photon interference.

arXiv:quant-ph/0610227•Physical Review Letters•Feb 5, 2007•122 citations

Efficient scheme for entangled states and quantum information transfer with trapped atoms in a resonator

Fuli Li, Fuli Li

A protocol is proposed to generate atomic entangled states and implement quantum information transfer in a cavity quantum electrodynamics system. It utilizes Raman transitions or stimulated Raman adiabatic passages between two systems to entangle the ground states of two three-state Λ-type atoms trapped in a single mode cavity. It does not need the measurements on cavity field nor atomic detection and can be implemented in a deterministic fashion. Since the present protocol is insensitive to both cavity decay and atomic spontaneous emission, it may have some interesting applications in quantum information processing.

Chinese Physics B•Sep 1, 2011•1 citation

Raman transitions in cavity QED

A. David. Boozer

In order to study quantum effects such as state superposition and entanglement, one would like to construct simple systems for which the damping rates are slow relative to the rate of coherent evolution. One such system is strong-coupling cavity quantum electrodynamics (QED), in which a single atom is coupled to a single mode of a high finesse optical cavity. In recent years, optical trapping techniques have been applied to the cavity QED system, allowing an individual atom to remain coupled to the cavity for long periods of time. For the purpose of future cavity QED experiments, one would like to gain as much control over the trapped atom as possible; in particular, one would like to cool the center of mass motion of the atom, to measure the magnetic field at the location of the atom, and to be able to prepare the atom in a given internal state. In the first part of this thesis, I present a scheme for driving Raman transitions inside the cavity that can be used to achieve these goals. After giving a detailed theoretical treatment of the Raman scheme, I describe how it can be implemented in the lab and discuss some preliminary experimental results. In the second part of this thesis, I present a number of simple field theory models. These models were developed in an attempt to understand some of the central ideas of theoretical physics by looking at how the ideas work in a highly simplified context. The hope is that by reducing the mathematical complexity of an actual theory, the underlying physical concepts can be more easily understood.

•May 31, 2005•6 citations

An enhanced approach for transferring quantum state between quantum nodes is proposed wherein photons serve as the information carrier. Each node consists of a Rubidium (87Rb) atom trapped inside a two-mode optical cavity. The approach is based on cavity quantum electrodynamics (QED) wherein a system of lasers is applied on the atom in order to generate photon through Raman transition. Logic states ‘0’ and ‘1’ are represented by two subspaces of the hyperfine energy levels with magnetic sub-levels of 87Rb atom. A static magnetic field is applied upon the atoms so that the hyperfine states of 87Rb atom are split into the magnetic sub-levels (due to Zeeman effect). Depending on the logic state of the transmit node, a right- or left-circularly polarized photon with designated frequency is produced through a cavity assisted Raman process. When the photon is received at the receive node via an optical fiber, the logic state of the transmit node is restored (through a cavity QED process) into the receive node. A desirable feature of the approach is that, during the transmission of logic state, the transmit node itself should not significantly change its quantum state; this is successfully validated through simulations.

A novel approach for logic state dependent generation of polarized photon is proposed, where the logic states '0' and '1' are represented by two sub-spaces in the Hilbert space of the hyperflne states of rubidium atom ( 87 Rb). Each subspace consists of a ground state, an intermediate state and an excited state. The atom is placed at the center of a two-mode cavity, and the cavity modes correspond to frequencies of the generated photon. Photon generation process involves raising the atom to the excited state within the corresponding subspace and letting it decay back to the initial (ground) state, emitting thereby a photon of logic state dependent polarization. In order to keep the driving laser frequencies far ofi from the cavity mode frequencies, the atom is raised to the excited state in two steps | flrst from the ground state to the intermediate state and then from the intermediate state to the excited state. Polarization states of the photon represent the logic states, and can be used to transport logic from one node to another of the quantum network.

We present two schemes for driving Raman transitions between the ground-state hyperfine manifolds of a single atom trapped within a high-finesse optical cavity. In both schemes, the Raman coupling is generated by standing-wave fields inside the cavity, thus circumventing the optical access limitations that free-space Raman schemes must face in a cavity system. These cavity-based Raman schemes can be used to coherently manipulate both the internal and motional degrees of freedom of the atom, and thus provide powerful tools for studying cavity quantum electrodynamics. We give a detailed theoretical analysis of each scheme, both for a three-level atom and for a multilevel cesium atom. In addition, we show how these Raman schemes can be used to cool the axial motion of the atom to the quantum ground state, and we perform computer simulations of the cooling process.

Single-photons of well-defined polarization that are deterministically generated in a single spatio-temporal field mode are the key to the creation of multi-partite entangled states in photonic networks. Here, we present a novel scheme to produce such photons from a single atom in an optical cavity, by means of vacuum-stimulated Raman transitions between the Zeeman substates of a single hyperfine state. Upon each transition, a photon is emitted into the cavity, with a polarization that depends on the direction of the Raman process.

Vacuum-stimulated Raman transitions are driven between two magnetic substates of a 87Rb atom strongly coupled to an optical cavity. A magnetic field lifts the degeneracy of these states, and the atom is alternately exposed to laser pulses of two different frequencies. This produces a stream of single photons with alternating circular polarization in a predetermined spatiotemporal mode. MHz repetition rates are possible as no recycling of the atom between photon generations is required. Photon indistinguishability is tested by time-resolved two-photon interference.

A protocol is proposed to generate atomic entangled states and implement quantum information transfer in a cavity quantum electrodynamics system. It utilizes Raman transitions or stimulated Raman adiabatic passages between two systems to entangle the ground states of two three-state Λ-type atoms trapped in a single mode cavity. It does not need the measurements on cavity field nor atomic detection and can be implemented in a deterministic fashion. Since the present protocol is insensitive to both cavity decay and atomic spontaneous emission, it may have some interesting applications in quantum information processing.

In order to study quantum effects such as state superposition and entanglement, one would like to construct simple systems for which the damping rates are slow relative to the rate of coherent evolution. One such system is strong-coupling cavity quantum electrodynamics (QED), in which a single atom is coupled to a single mode of a high finesse optical cavity. In recent years, optical trapping techniques have been applied to the cavity QED system, allowing an individual atom to remain coupled to the cavity for long periods of time. For the purpose of future cavity QED experiments, one would like to gain as much control over the trapped atom as possible; in particular, one would like to cool the center of mass motion of the atom, to measure the magnetic field at the location of the atom, and to be able to prepare the atom in a given internal state. In the first part of this thesis, I present a scheme for driving Raman transitions inside the cavity that can be used to achieve these goals. After giving a detailed theoretical treatment of the Raman scheme, I describe how it can be implemented in the lab and discuss some preliminary experimental results. In the second part of this thesis, I present a number of simple field theory models. These models were developed in an attempt to understand some of the central ideas of theoretical physics by looking at how the ideas work in a highly simplified context. The hope is that by reducing the mathematical complexity of an actual theory, the underlying physical concepts can be more easily understood.