Journal of Modern Optics

A Geometric-phase Interferometer

P. Hariharan, Maitreyee Roy

Published Sep 1, 1992• 51 citations

Abstract

An interferometer operating purely on the geometric phase is described. The optical paths traversed by the two beams in this interferometer are always equal, and the phase difference between the beams is varied by operating on the geometric phase

DOI: 10.1080/09500349214551881

Related papers

Interferometric demonstration of the Berry's Phase

Ricardo Téllez-Limón, Carlos Ignacio Robledo-Sánchez

The present paper shows an optical interferometer which operates only in the geometric phase, or Berry's phase. In this system, the optical paths traversed by the two beams of light are always the same, and the difference in their phases can be varied by manipulating this geometrical phase. We also make a comparison of the interference pattern produced experimentally in the laboratory, and another one produced by a computer program.

Nov 1, 20090 citations

Geometric-phase Interferometers Possible Optical Configurations

P. Hariharan

This Letter presents a systematic study of the possible optical configurations for an interferometer operating purely on the geometric phase and shows how these configurations can be implemented with standard optical components.

Journal of Modern OpticsJun 1, 19936 citations

The geometric phase in optics: observations at the classical and quantum limits

P. Hariharan

The wave function of a quantum system may acquire an additional phase factor (the geometric phase), when its parameters undergo a cyclic change. An optical manifestation of the geometric phase is the change in the phase of a light wave produced when its state of polarization is taken around a circuit on the Poincare sphere. This phase change can be verified by interferometric measurements. We describe an interferometer in which the two beams traverse the same path in opposite directions, so that their optical paths are always equal, and the phase difference between them is varied by operating on the geometric phase. Measurements made with this interferometer, at a light level at which the probability of more than one photon being present simultaneously in the interferometer was negligibly small, confirmed that the interference effects observed due to the geometric phase persist down to the single photon level.

16th Congress of the International Commission for Optics: Optics as a Key to High TechnologyJul 26, 19930 citations

The Geometric Phase

P. Hariharan, Maitreyee Roy, Peter A. Robinson +1 more

The change in the phase of a beam of light produced by a cyclic change in its state of polarization is an example of the geometric phase that can be verified by interferometric measurements. This paper presents a quantum-field theoretical analysis of the geometric phase interferometer in the limit of a small photon number, as well as some experimental results that confirm that the optical effects due to the geometric phase persist down to the single-photon level.

Journal of Modern OpticsMay 1, 199310 citations

Nonlinear interferometer systems and methods

Joseph M. Lukens

Nonlinear interferometers include a nonlinear optical medium that is situated to produce a conjugate optical beam in response to a pump beam and a probe beam. The pump, probe, and conjugate beams propagate displaced from each other along a common optical path. One of the beams is selectively phase shifted, and the beams are then returned to the nonlinear medium, with the selectively phase shift beam phase shifted again. The nonlinear medium provides phase sensitive gain to at least one of the probe or conjugate beams, and the amplified beam is detected to provide an estimate of the phase shift.

Dec 6, 20230 citations

Active Phase Compensation in a Fiber-Optical Mach-Zehnder Interferometer

Joakim Argillander

This thesis investigates the phenomena of phase stability in a fiber-optical MZI (Mach-Zehnder Interferometer). The MZI is a key building block of optical systems for use in experiments with both continuous-wave light and with single photons. By splitting incoming light into two beams and allowing it to interfere with itself, an interference pattern is visible at the output, and this phenomena can be used to code information. This is the operating principle in, for example, QKD (Quantum Key Distribution) experiments. This interference requires coherence that is higher than the length difference between the beams that the incoming light is split into. Particularly the phase of the beams must be equal to achieve constructive interference. If one beam is phase-shifted (with respect to the other) due to the light having traversed a longer path, only partially constructive interference is achieved. If the phase shift also varies with time this leads to a system where experiments can no longer reliably be performed. Sources of these fluctuations are thermal, acoustic or mechanical. Fiber-optical interferometers are particularly sensitive to path length fluctuations of the waveguides as the fiber-optic medium contracts and elongates with temperature, and also has a larger surface area for circulating air to mechanically disturb the waveguides than bulk optics interferometers. In this thesis, a solution to environment-induced phase drift is presented by evaluating implementations of feedback algorithms for automatic control. The algorithms PID (Proportional-, Integral-, Derivative controller) and an ICA (IncrementalControl Algorithm) have been investigated and the performance of these controllers has been compared when used with, and without, optical enclosures. The algorithms are implemented in an FPGA (Field-Programmable Gate Array) and the controller actuates an electro-optical phase modulator that can add a phase shift to one of the light beams in the MZI. This thesis shows that significant improvement in the optical stability can be achieved with active control compared to an interferometer without active phase control.

Jan 1, 20200 citations