International Conference on Signal Processing and Communications (SPCOM)

Improving BER Performance of LDPC Codes based on Intermediate Decoding Results

Esa Alghonaim, Mohamed Adnan Landolsi, Aiman Helmi El-Maleh

Published Nov 1, 2007• 5 citations

Abstract

The paper presents a novel approach to reduce the bit error rate (BER) in iterative belief propagation (BP) decoding of low density parity check (LDPC) codes. The behavior of the BP algorithm is first investigated as a function of number of decoder iterations, and it is shown that typical uncorrected error patterns can be classified into 3 categories: oscillating, nearly-constant, or random-like, with a predominance of oscillating patterns at high Signal-to-Noise (SNR) values. A proposed decoder modification is then introduced based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than relying on the final decoder output (after reaching the maximum number of iterations). Simulation results with a rate ¿ (1024,512) progressive edge-growth (PEG) LDPC code show that the proposed modification can decrease the BER by as much as 10-to-40%, particularly for high SNR values.

DOI: 10.1109/icspc.2007.4728627

Related papers

A Modified belief propagation decoding algorithm for low-density parity-check codes based on oscillating iteration

Bao Jian-rong

According to no-convergence of falsely oscillating iteration in the low-density parity-check(LDPC) decoding at the range from medium to high SNRs(Signal to Noise Ratios),we propose a modified LDPC belief propagation(BP) decoding algorithm,i.e.soft value zero-forcing BP algorithm.By setting extrinsic information of the oscillating iteration bit nodes into zero,the impact on the iteratively decoding from false channel information is greatly reduced.And it also improves the performance of the decoding algorithm.Furthermore,a decision criterion of oscillating iteration nodes is presented to increase the accuracy of the decision.Simulation results show that the proposed algorithm has better decoding performance than that of the BP algorithm with the same iterations at medium and high SNRs.

Journal of Circuits and SystemsJan 1, 20120 citations

Modified Belief Propagation Decoding Algorithm for Low-Density Parity Check Code Based on Oscillation

Satoshi Gounai, Tomoaki Otsuki Ohtsuki, T. Kaneko

A low-density parity check (LDPC) code with the belief propagation (BP) or the log-likelihood ratio belief propagation (LLR-BP) can achieve good bit error rate (BER) performance approaching the Shannon limit. When a parity check matrix of the LDPC code has the cycle, the BP and LLR-BP decoding algorithms achieve approximate maximum a posterior probability (MAP) decoding. Although the decoding algorithms are approximate MAP decoding, LDPC codes can achieve very good BER. For the short and middle length LDPC codes, BER and block error rate (BLER) performances are affected by cycle largely. In each iteration, the magnitudes of a posterior LLRs of some bits oscillate owing to cycles. The oscillation is the dominant error factor in the high Eb/Noregion for short and middle length LDPC codes. In this paper, we extend the definition of oscillation to extrinsic LLR (ex-LLR) derived in the bit node process and propose the modified LLR-BP and the modified UMP-BP decoding algorithms. To reduce effects of oscillating ex-LLRs on decoding, for oscillating ex-LLRs, we add the previous ex-LLR to the current ex-LLR. From the computer simulation, we show that for short and middle length LDPC codes, with a simple modification, our proposed decoding algorithms can improve the conventional LLR-BP and UMP-BP decoding algorithms. In particular, we show that the modified UMP-BP decoding algorithm with low complexity can achieve better BER and BLER than the conventional LLR-BP decoding algorithm

IEEE Vehicular Technology ConferenceSep 8, 200615 citations

Iterative reliability-based decoding of low-density parity check codes

M.P.C. Fossorier

In this paper, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between belief propagation decoding which remains suboptimum, and maximum likelihood decoding which is too complex to be implemented for the codes considered. Trade-offs between decoding complexity and error performance are also investigated. In particular, a stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is proposed for this combined decoding approach. Simulation results for several Gallager (1963, 1968) LDPC codes and different set cyclic codes of hundreds of information bits are given and elaborated.

IEEE Journal on Selected Areas in CommunicationsMay 1, 2001167 citations

An Improved Decoding Algorithm for Finite-Geometry LDPC Codes

Yin-bing BIAN, Yuanqing Wang, Jie Wang

In this letter, we propose a new modification to the belief propagation (BP) decoding algorithm for Finite-Geometry low-density parity-check (LDPC) codes. The modification is based on introducing into the iterative process, which can break the oscillations of bit log-likelihood ratio (LLR) values. Simulations show that, with a given maximum iteration, the feedback BP (FBP) algorithm can achieve better performance than the conventional belief propagation algorithm.

IEICE Transactions on CommunicationsApr 1, 20071 citation

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network TechnologiesApr 1, 20151 citation

Iterative reliability based decoding of LDPC codes

M.P.C. Fossorier

In this work, reliability based decoding is combined with belief propagation (BP) decoding for low-density parity check (LDPC) codes. At each iteration, the soft output values delivered by the BP algorithm are used as reliability values to perform reduced complexity soft decision decoding of the code considered. This approach allows to bridge the error performance gap between BP decoding which remains suboptimum, and maximum likelihood decoding (MLD) which is too complex to be implemented for the codes considered. A stopping criterion which reduces the average number of iterations at the expense of very little performance degradation is also proposed for this combined decoding approach. Simulations results for several Gallager LDPC codes and different set cyclic (DSC) codes of hundreds of information bits are given and elaborated.

IEEE International Symposium on Information Theory (ISIT)Nov 13, 20024 citations