Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Shift Register Function in Optical Buffer Memory using Polarization Bistable VCSELs

Takashi Mori, Yuuki Sato, Hitoshi Kawaguchi

Published May 1, 2007• 7 citations
Publisher

Abstract

Shift register function in optical buffer memory was experimentally demonstrated using polarization bistable VCSELs. Input data stored as the polarization state of the first VCSEL were transferred to the polarization state of the second VCSEL.
DOI
10.1109/cleo.2007.4452993

Related papers

10 Gb/s optical buffer memory using a polarization bistable VCSEL

Takashi Mori, Yousuke Sato, Hitoshi Kawaguchi

Optical buffer memory for 10-Gb/s data signal is demonstrated experimentally using a polarization bistable vertical-cavity surface-emitting laser (VCSEL). The optical buffer memory is based on an optical AND gate function and the polarization bistability of the VCSEL. Fast AND gate operation responsive to 50-ps-width optical pulses is achieved experimentally by increasing the detuning frequency between an injection light into the VCSEL and a lasing light from the VCSEL. A specified bit is extracted from the 10-Gb/s data signal by the fast AND gate operation and is stored as the polarization state of the VCSEL by the polarization bistability. The corresponding numerical simulations are also performed using two-mode rate equations taking into account the detuning frequency. The simulation results confirm the fast AND gate operation by increasing the detuning frequency as well as the experimental results.

European Conference on Optical Communication•Jan 1, 2007•4 citations

Experimental Demonstration of Multi-Bit Optical Buffer Memory Using 1.55-$\mu{\hbox {m}}$ Polarization Bistable Vertical-Cavity Surface-Emitting Lasers

Takeo Katayama, Tomohiro Ooi, Hitoshi Kawaguchi

We demonstrate a novel all-optical buffer memory using 1.55-μm polarization bistable vertical-cavity surface-emitting lasers (VCSELs). A one-bit data is stored as one of two orthogonal polarization states of a VCSEL in this memory. The polarization state is transferred from the VCSEL to another VCSEL which is optically connected in cascade as a shift register. A 4-bit optical buffer memory is constructed using two sets of the shift-register memory connected in parallel. These results show the technical feasibility of multi-bit optical buffer memory.

IEEE Journal of Quantum Electronics•Nov 1, 2009•74 citations

Ultrafast all-optical memory operation using a polarization bistable VCSEL

Hitoshi Kawaguchi

The fastest operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 26-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations had optical gain.

International Conference on Transparent Optical Networks•Jun 1, 2010•1 citation

High Switching-Speed Operation of Optical Memory Based on Polarization Bistable Vertical-Cavity Surface-Emitting Laser

Jun Sakaguchi, Takeo Katayama, Hitoshi Kawaguchi

Operation conditions of all-optical buffer memories based on polarization bistable vertical-cavity surface-emitting lasers (VCSELs) were investigated. The switching power dependence on the frequency detuning of the input optical signal was measured for a 980-nm polarization bistable VCSEL. The proper operating conditions for 10-Gb/s memory operation were also measured and found to be on the negative detuning side. Calculations based on a two-mode rate-equation model successfully explained the measured characteristics of the switching power dependence on the frequency detuning and the operating conditions. Maximum data rates for the memory operation strongly depended on theQfactor (i.e., photon lifetime) of the VCSELs. A possibility of 40-Gb/s memory operation using a polarization bistable VCSEL with aQfactor as low as 500 was shown.

IEEE Journal of Quantum Electronics•Sep 8, 2010•58 citations

All-optical memory operation of 980-nm polarization bistable VCSEL for 20-Gb/s PRBS RZ and 40-Gb/s NRZ data signals

Jun Sakaguchi, Takeo Katayama, Hitoshi Kawaguchi

The fastest known operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 2(6)-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations required 250-microW data signal power and had optical gain. The high potential of all-optical flip-flop memories based on polarization bistable VCSELs for use in ultrafast all-optical future networks was demonstrated.

Optics Express•May 26, 2010•52 citations

Ultrafast optical memory and all-optical signal processing using polarization bistable VCSELs

仁司 河口

Ultrafast optical memory and all-optical signal processing using polarization bistable VCSELs

The Review of Laser Engineering•Jan 1, 2006•0 citations
Optical buffer memory for 10-Gb/s data signal is demonstrated experimentally using a polarization bistable vertical-cavity surface-emitting laser (VCSEL). The optical buffer memory is based on an optical AND gate function and the polarization bistability of the VCSEL. Fast AND gate operation responsive to 50-ps-width optical pulses is achieved experimentally by increasing the detuning frequency between an injection light into the VCSEL and a lasing light from the VCSEL. A specified bit is extracted from the 10-Gb/s data signal by the fast AND gate operation and is stored as the polarization state of the VCSEL by the polarization bistability. The corresponding numerical simulations are also performed using two-mode rate equations taking into account the detuning frequency. The simulation results confirm the fast AND gate operation by increasing the detuning frequency as well as the experimental results.
Experimental Demonstration of Multi-Bit Optical Buffer Memory Using 1.55-μm\mu{\hbox {m}}μm Polarization Bistable Vertical-Cavity Surface-Emitting Lasers
We demonstrate a novel all-optical buffer memory using 1.55-μm polarization bistable vertical-cavity surface-emitting lasers (VCSELs). A one-bit data is stored as one of two orthogonal polarization states of a VCSEL in this memory. The polarization state is transferred from the VCSEL to another VCSEL which is optically connected in cascade as a shift register. A 4-bit optical buffer memory is constructed using two sets of the shift-register memory connected in parallel. These results show the technical feasibility of multi-bit optical buffer memory.
The fastest operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 26-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations had optical gain.
Operation conditions of all-optical buffer memories based on polarization bistable vertical-cavity surface-emitting lasers (VCSELs) were investigated. The switching power dependence on the frequency detuning of the input optical signal was measured for a 980-nm polarization bistable VCSEL. The proper operating conditions for 10-Gb/s memory operation were also measured and found to be on the negative detuning side. Calculations based on a two-mode rate-equation model successfully explained the measured characteristics of the switching power dependence on the frequency detuning and the operating conditions. Maximum data rates for the memory operation strongly depended on theQfactor (i.e., photon lifetime) of the VCSELs. A possibility of 40-Gb/s memory operation using a polarization bistable VCSEL with aQfactor as low as 500 was shown.
The fastest known operation of all-optical flip-flop memory was experimentally demonstrated using a 980-nm polarization bistable vertical-cavity surface-emitting laser (VCSEL). Operating conditions of the input signal power and the frequency detuning to achieve the fast optical memory operation were characterized experimentally. At the optimum condition, 1-bit data signals were arbitrarily sampled and memorized from a 2(6)-1 pseudorandom bit sequence return-to-zero signal at 20 Gb/s by using AND gate and memory functionalities obtained from the polarization bistability. In addition, 1-bit memory operation was achieved for a 6-bit non-return-to-zero signal at 40 Gb/s. Both memory operations required 250-microW data signal power and had optical gain. The high potential of all-optical flip-flop memories based on polarization bistable VCSELs for use in ultrafast all-optical future networks was demonstrated.