Group and electromagnetic energy velocities in structural and material slow light are compared. They are equal for structural slow light; the enhancement of linear and nonlinear effects depends on energy velocity.
There are two standard methods for controlling the group velocity of light. One makes use of the dispersive properties associated with the resonance structure of a material medium. The other makes use of structural resonances, such as those that occur in photonic crystals. Both procedures have proved useful in a variety of situations. In this work we contrast these two approaches, especially in terms of issues such as the kinematics of energy flow though the system and the resulting implications for the behavior of nonlinear optical processes in these situations. Stated differently, this paper addresses the question of when nonlinear optical processes are enhanced through use of slow-light interactions and when they are not.
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 The propagation of light in dispersive media can be described by five different kinds of wave velocities [1-3]: • Phase velocity, which is the speed at which the zero crossings of the carrier wave move • Group velocity, at which the peak of a wave packet moves • Energy velocity, at which the energy is transported by the wave • Signal velocity, at which the half-maximum wave amplitude moves • Front velocity, at which the first appearance of a discontinuity moves Generally, all five velocities can differ from each other, although in a linear passive dispersive media, they coincide and are, usually, less than the light velocity in vacuum. Recently, experimental demonstrations [4-6] in variousmedia show that the group velocity of light canbe reducedby10-100million compared with its vacuum phase velocity. The physics is based on very steep frequency dispersion in the vicinity of narrow resonance of electromagnetically induced transparency (EIT) [7-11].
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
In early 1999, a news article in the prestigious journal Nature led off with the announcement, "An experiment with atoms at nanokelvin temperatures has produced the remarkable observation of light pulses traveling at velocities of only 17 m/s." The review continued with the understatement, "Observation of light pulses propagating at a speed no faster than a swiftly moving bicycle...comes as a surprise." These findings (and their review) marked the beginning of the current wave of interest in the field that has come to be called "slow light.â" When we refer to "the speed of light," we typically mean c, the phase velocity of light in a vacuum, or the speed of propagation of the phase fronts of monochromatic light. The phase fronts travel more slowly through a material, propagating at the speed c/n, where n is the index of refraction of the medium. However, this ordinary slowing of the phase velocity is not slow light. "Slow light" and "fast light" refer to changes in the group velocity of light in a medium. A pulse of light can be decomposed mathematically into a group of monochromatic waves at slightly different frequencies, as in Fig. 19.1. In a dispersive material, these monochromatic waves travel at different speeds. When one views the propagation of the pulse as a whole, its apparent velocity depends on the extent of the spread of individual monochromatic-wave velocities. Each monochromatic wave travels at its own phase velocity, while the pulse travels at the group velocity. Of course, the group velocity of a pulse of light is not a new concept. The field of slow and fast light has drawn on theory and developments from the work of Sommerfeld and Brillouin from 1907 to 1914, experiments with early laser amplifiers in 1966, and other work done through the end of the 20th century. (For more of the history behind slow and fast light, see Refs. 8 and 9.)
Research into slow light began theoretically in 1880 with the paper [1] of H A Lorentz, who is best known for his work on relativity and the speed of light. Experimental work started some 60 years later with the work of S L McCall and E L Hahn [2] who explored non-linear self-induced transparency in ruby. This field of research has burgeoned in the last 10 years, starting with the work of L Vestergaard Hau and coworkers on slow light via electromagnetically induced transparency in a Bose–Einstein condensate [3]. Many groups are now able to slow light down to a few metres per second or even stop the motion of light entirely [4]. Today, slow light – or more often `slow and fast light' – has become its own vibrant field with a strongly increasing number of publications. In broad scope, slow light research can be categorized in terms of the sort of physical mechanism used to slow down the light. One sort of slow light makes use of material dispersion. This dispersion can be the natural dispersion of the ordinary refractive index or can be the frequency dependence of some nonlinear optical process, such as electromagnetically induced transparency, coherent population oscillations, stimulated light scattering, or four-wave mixing processes. The second sort of slow light makes use of the wavelength dependence of artificially structured materials, such as photonic crystals, optical waveguides, and collections of microresonators. Material systems in which slow light has been observed include metal vapours, rare-earth-doped materials, Raman and Brillioun gain media, photonic crystals, microresonators and, more recently, metamaterials. A common feature of all of these schemes is the presence of a sharp single resonance or multiple resonances produced by an atomic transition, a resonance in a photonic structure, or in a nonlinear optical process. Current applications of slow light include a series of attractive topics in optical information processing, such as optical data storage, optical memories, quantum information devices, and optical communication systems in which the use of slow light will allow all-optical processing with less wasted heat. To implement these applications, devices such as buffers, memories, interferometers and switches that utilize slow light need to be developed. Future challenges include the need for improved coupling of light into slow light modes, overcoming propagation losses, and mitigating the influence of large dispersion of the group velocity. The collection of papers in this special issue of Journal of Optics features a broad spectrum of articles that highlight actual developments in many of the material types and schemes described above. It represents therefore an excellent up to date snapshot of the current state of the field of slow light research. References [1] Lorentz H A 1880 Uber die Beziehung zwischen der Fortpflanzung des Lichtes und der Körperdichte Wiedemann Ann. 9 641–64 [2] McCall S L and Hahn E L 1967 Self-induced transparency by pulsed coherent light Phys. Rev. Lett. 18 908–11 [3] Vestergaard Hau L, Harris S E, Dutton Z and Behroozi C H 1999 Nature 397 594 [4] Philips D F, Fleischhauer A, Mair A, Walsworth R L and Lukin M D 2001 Storage of light in atomic vapor Phys. Rev. Lett. 86 783–6