Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Bistable optical switching in GaAs multiple-quantum-well epitaxial etalons

J Oudar, Bruno G. Sfez, Robert Kuszelewicz

Published Mar 1, 1991• 0 citations
Publisher

Abstract

Epitaxial methods allow the fabrication of nonlinear interferomethc structures which include the mirrors and the GaAs Multiple Quantum Wells (MQW) nonlinear medium in a single crystal. This results in very compact nonlinear microcavities with typically 5im overall thickness. Optical bistability is observed in these structures at mW optical power. We review our latest experimental results on these structures including the observation of high contrast switching in the reflection mode the direct measurement of dispersive optical nonlinearities in MQWs evidencing their saturation behavior at high intensities. Finally we report external-beam switching experiments which allow to assess the potential of these structures as all-optical gates.

DOI
10.1117/12.24383

Related papers

Low Power Optical Switching In GaAs Epitaxial Etalons

J. L. Oudar, Bruno G. Sfez, Robert Kuszelewicz

Epitaxial methods allow the fabrication of nonlinear interferometric structures which include the mirrors and the nonlinear medium in a single crystal. Optical bistability is observed in these structures at mW optical power. The large excitonic and band-gap resonant nonlinearities of direct-gap semiconductors, such as bulk GaAs or Multiple Quantum Wells (MQW), allow to reach a substantial phase-shift (0.2-0.3 radian) over interaction lengths as small as a few wavelengths. This results in very compact nonlinear microcavities, with typically 5μm overall thickness.

Digest on Nonlinear Optics: Materials, Phenomena and Devices•Jan 1, 1990•0 citations

High-Contrast Multiple Quantum-Well Optical Bistable Device with Integrated Bragg Reflectors

Bruno G. Sfez, J. L. Oudar, J. C. Michel +2 more

Monolithic bistable microcavities with a GaAs/Al0.3Ga0.7As multiple quantum well active layer and AlAs/Al0.1Ga0.9As Bragg reflectors have been fabricated by metalorganic vapor phase epitaxy. The design of the whole structure is such that a good cavity finesse and a high contrast in the reflective mode are simultaneously obtained. This results in a bistability power threshold of less than 3 mW at 838 nm and a contrast ratio as high as 30:1. A new method is proposed, which allows to measure the nonlinear refractive index in a quasi-continuous regime, and in the operating conditions for bistability. The nonlinear index is shown to saturate at higher power, which evidences the need of a good cavity finesse for such bistable devices. Memory effect is then demonstrated: the sample can stay in either of its two stable states for more than 1 ms without spontaneously switching, and for input pulses as short as 60 ns. Finally we describe two-beam experiments with a new experimental configuration, also in reflection, which allows to mix the two input beams and extract the output beam with an ideal 100% efficiency.

Nonlinear Dynamics in Optical Systems•Jan 1, 1990•0 citations

Optical Nonlinearities of GaAs‐Based Epitaxial Structures for All‐Optical Switching

J. L. Oudar, Bruno G. Sfez, Robert Kuszelewicz +2 more

Abstract An experimental study is made of GaAs/AlGaAs monolithic bistable etalons fabricated by metalorganic vapor‐phase epitaxy. Optical bistability is observed in the reflective mode, with a minimum threshold power of less than 3 mW and a switching contrast as high as 30: 1, with a cavity resonator designed to achieve simultaneously a high finesse and a high reflectivity contrast. The dispersive optical nonlinearity of the multiple quantum well active medium is measured as a function of the intracavity intensity, and a strong saturation behavior is observed. The origin of this saturation and its implication on the design of future devices is discussed briefly.

physica status solidi (b)•May 1, 1990•24 citations

Room-temperature excitonic optical bistability in bulk GaAs

Jack L. Jewell, Seth Ovadia, Nasser N. Peyghambarian +4 more

Optical bistable devices containing GaAs/AlGaAs multiple quantum well (MQW) structures have shown great potential for performing fast low-power optical switching at room temperature.1 The presence of a much stronger exciton absorption feature in the MQW structures compared to bulk GaAs suggests far superior performance in the former. We report the observation of room-temperature bistability in bulk GaAs with input power <10 mW and intensities of a few kW/cm2. The intensities are consistent with the data of Miller et al.2 which show a saturation intensity of nearly 4 kW/cm2 in a MQW sample with a detuning of less than a halfwidth from the peak of the exciton resonance. Our detunings are always several halfwidths.

Conference on Lasers and Electro-Optics•Jan 1, 1984•1 citation

Bistable switching in nonlinear Al0.06Ga0.94As étalons

Olof Sahlén, Eric Masseboeuf, Michael Rask +2 more

Optical bistability at 5 mW input power at 840 nm is reported in Al0.06Ga0.94As étalons grown by metalorganic vapor phase epitaxy, having an epitaxially grown high-reflecting back mirror. The devices have been switched from the high-reflecting to the low-reflecting state with pulses from a laser diode operating at 778 nm with 10 pJ switching energy. The devices could be thermally stable for as long as 200 μs. The experimental results are compared with a simple theoretical model.

Applied Physics Letters•Nov 7, 1988•15 citations

Optical bistability and gating in metalorganic vapor phase epitaxy grown GaAs étalons operating in reflection

Olof Sahlén, Ulf Olin, Eric Masseboeuf +2 more

Nonlinear Fabry–Perot étalons of GaAs have been fabricated with metalorganic vapor phase epitaxy technology. The étalons operate in reflection mode, and have an epitaxially grown, rear dielectric mirror consisting of a stack of alternating AlAs/GaAlAs layers. Optical logic functions using a HeNe laser and optical bistability at room temperature are reported. Low switching powers and improved étalon uniformity are obtained.

Applied Physics Letters•Jun 1, 1987•37 citations
Epitaxial methods allow the fabrication of nonlinear interferomethc structures which include the mirrors and the GaAs Multiple Quantum Wells (MQW) nonlinear medium in a single crystal. This results in very compact nonlinear microcavities with typically 5im overall thickness. Optical bistability is observed in these structures at mW optical power. We review our latest experimental results on these structures including the observation of high contrast switching in the reflection mode the direct measurement of dispersive optical nonlinearities in MQWs evidencing their saturation behavior at high intensities. Finally we report external-beam switching experiments which allow to assess the potential of these structures as all-optical gates.
Epitaxial methods allow the fabrication of nonlinear interferometric structures which include the mirrors and the nonlinear medium in a single crystal. Optical bistability is observed in these structures at mW optical power. The large excitonic and band-gap resonant nonlinearities of direct-gap semiconductors, such as bulk GaAs or Multiple Quantum Wells (MQW), allow to reach a substantial phase-shift (0.2-0.3 radian) over interaction lengths as small as a few wavelengths. This results in very compact nonlinear microcavities, with typically 5μm overall thickness.
Monolithic bistable microcavities with a GaAs/Al0.3Ga0.7As multiple quantum well active layer and AlAs/Al0.1Ga0.9As Bragg reflectors have been fabricated by metalorganic vapor phase epitaxy. The design of the whole structure is such that a good cavity finesse and a high contrast in the reflective mode are simultaneously obtained. This results in a bistability power threshold of less than 3 mW at 838 nm and a contrast ratio as high as 30:1. A new method is proposed, which allows to measure the nonlinear refractive index in a quasi-continuous regime, and in the operating conditions for bistability. The nonlinear index is shown to saturate at higher power, which evidences the need of a good cavity finesse for such bistable devices. Memory effect is then demonstrated: the sample can stay in either of its two stable states for more than 1 ms without spontaneously switching, and for input pulses as short as 60 ns. Finally we describe two-beam experiments with a new experimental configuration, also in reflection, which allows to mix the two input beams and extract the output beam with an ideal 100% efficiency.
Abstract An experimental study is made of GaAs/AlGaAs monolithic bistable etalons fabricated by metalorganic vapor‐phase epitaxy. Optical bistability is observed in the reflective mode, with a minimum threshold power of less than 3 mW and a switching contrast as high as 30: 1, with a cavity resonator designed to achieve simultaneously a high finesse and a high reflectivity contrast. The dispersive optical nonlinearity of the multiple quantum well active medium is measured as a function of the intracavity intensity, and a strong saturation behavior is observed. The origin of this saturation and its implication on the design of future devices is discussed briefly.
Optical bistable devices containing GaAs/AlGaAs multiple quantum well (MQW) structures have shown great potential for performing fast low-power optical switching at room temperature.1 The presence of a much stronger exciton absorption feature in the MQW structures compared to bulk GaAs suggests far superior performance in the former. We report the observation of room-temperature bistability in bulk GaAs with input power <10 mW and intensities of a few kW/cm2. The intensities are consistent with the data of Miller et al.2 which show a saturation intensity of nearly 4 kW/cm2 in a MQW sample with a detuning of less than a halfwidth from the peak of the exciton resonance. Our detunings are always several halfwidths.