Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Superconductive digital instantaneous frequency-measurement subsystem

Guo‐Chun Liang, C. F. Shih, R.S. Withers, Ben Cole, Marie E. Johansson, L. P. Suppan

Published Jan 4, 1994• 1 citation
Publisher

Abstract

A five-bit high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500 MHz bandwidth, centered on 4 GHz, with a resolution of +/- 7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules utilizing superconductive delay lines, GaAs mixers, and power dividers. With a single-tone cw input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values. This system demonstrates the potential system-level application of high-temperature superconductive electronics in instrumentation, communication, radar, and electronic warfare.

DOI
10.1117/12.166144

Related papers

Superconductive digital instantaneous frequency measurement subsystem

Guo‐Chun Liang, Chien-Fu Shih, R.S. Withers +3 more

A 5-b high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of +or-7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules using superconductive delay lines, GaAs mixers, and power dividers. The subsystem also has a room-temperature GaAs limiting amplifier and a silicon postprocessor. With a single-tone CW (continuous-wave) input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values.>

IEEE Transactions on Microwave Theory and Techniques•Jan 1, 1993•35 citations

Space-qualified superconductive digital instantaneous frequency-measurement subsystem

Guo‐Chun Liang, Chien-Fu Shih, R.S. Withers +2 more

We have constructed a five-bit high temperature superconductive digital instantaneous frequency measurement (DIFM) subsystem capable of determining the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of 17.8 MHz. The system consists of three parts: a limiting amplifier and filter, a comparator and data processing unit operating at room temperature, and a cryogenic subsystem containing five discriminator modules based on superconductive delay lines, GaAs mixers and power dividers. With a single-tone CW input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values. This system was built for the High-Temperature Superconductor Space Experiment, Phase II (HTSSE II). It has passed all required qualification tests for vibration, shock and thermal cycling. The system is currently scheduled for satellite launch in fall 1996. Compared to a conventional system, the superconductive version of the DIFM is considerably smaller and provides enhanced resolution. In addition, the technology employed can be readily extended to a system with additional bits and wider instantaneous bandwidth. The system built demonstrates the potential for system-level applications of high-temperature superconductive electronics in instrumentation, communications, radar, and electronic warfare.

IEEE Transactions on Microwave Theory and Techniques•Jul 1, 1996•44 citations

Superconductive digital instantaneous frequency-measurement subsystem

G.-C. Liang, Chuan‐Feng Shih, R.S. Withers +3 more

A 5-b high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of +or-7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules using superconductive delay lines, GaAs mixers, and power dividers. The subsystem also has a room-temperature GaAs limiting amplifier and a silicon postprocessor. With a single-tone CW (continuous-wave) input between-40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values.>

IEEE MTT-S International Microwave Symposium digest•Dec 31, 2002•2 citations

Superconductor analog-to-digital converters and their applications

Deepnarayan Gupta, Amol Inamdar, Dmitri E. Kirichenko +2 more

A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.

IEEE MTT-S International Microwave Symposium digest•Jun 1, 2011•21 citations

Superconductive chirp-transform spectrum analyzer

R.S. Withers, Stanley A. Reible

Spectral analysis over an instantaneous bandwidth of 2.4 GHz has been demonstrated utilizing superconductive dispersive delay lines in a chirp-transform configuration. Two-tone resolution of 43 MHz and ±1.2-dB amplitude uniformity were achieved.

IEEE Electron Device Letters•Jun 1, 1985•9 citations

Superconductive analog signal processing devices

R.S. Withers, Richard W. Ralston

Real-time signal processing is important in many emerging applications in areas such as pulse-compression radar, spread-spectrum communications, and electronic warfare. The required digitally equivalent computational rate for these applications is on the order of 10/sup 2/ arithmetic operations per second and the required instantaneous bandwidths could approach 10 GHz. These exceed by nearly three orders of magnitude the capabilities projected for digital systems in the near future, and even exceed that of recently developed analog technologies such as surface-acoustic-wave (SAW) signal-processing devices. To meet anticipated future system needs, superconductive analog signal-processing components with bandwidths of 2 GHz have recently been realized, and the technology is being developed for the realization of 10-GHz bandwidths. Issues of fabrication technology and subsystem integration are examined for superconductive analog signal-processing devices.>

Proceedings of the IEEE•Jan 1, 1989•61 citations
A five-bit high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500 MHz bandwidth, centered on 4 GHz, with a resolution of +/- 7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules utilizing superconductive delay lines, GaAs mixers, and power dividers. With a single-tone cw input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values. This system demonstrates the potential system-level application of high-temperature superconductive electronics in instrumentation, communication, radar, and electronic warfare.
A 5-b high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of +or-7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules using superconductive delay lines, GaAs mixers, and power dividers. The subsystem also has a room-temperature GaAs limiting amplifier and a silicon postprocessor. With a single-tone CW (continuous-wave) input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values.>
We have constructed a five-bit high temperature superconductive digital instantaneous frequency measurement (DIFM) subsystem capable of determining the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of 17.8 MHz. The system consists of three parts: a limiting amplifier and filter, a comparator and data processing unit operating at room temperature, and a cryogenic subsystem containing five discriminator modules based on superconductive delay lines, GaAs mixers and power dividers. With a single-tone CW input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values. This system was built for the High-Temperature Superconductor Space Experiment, Phase II (HTSSE II). It has passed all required qualification tests for vibration, shock and thermal cycling. The system is currently scheduled for satellite launch in fall 1996. Compared to a conventional system, the superconductive version of the DIFM is considerably smaller and provides enhanced resolution. In addition, the technology employed can be readily extended to a system with additional bits and wider instantaneous bandwidth. The system built demonstrates the potential for system-level applications of high-temperature superconductive electronics in instrumentation, communications, radar, and electronic warfare.
A 5-b high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of +or-7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules using superconductive delay lines, GaAs mixers, and power dividers. The subsystem also has a room-temperature GaAs limiting amplifier and a silicon postprocessor. With a single-tone CW (continuous-wave) input between-40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values.>
A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.
Real-time signal processing is important in many emerging applications in areas such as pulse-compression radar, spread-spectrum communications, and electronic warfare. The required digitally equivalent computational rate for these applications is on the order of 10/sup 2/ arithmetic operations per second and the required instantaneous bandwidths could approach 10 GHz. These exceed by nearly three orders of magnitude the capabilities projected for digital systems in the near future, and even exceed that of recently developed analog technologies such as surface-acoustic-wave (SAW) signal-processing devices. To meet anticipated future system needs, superconductive analog signal-processing components with bandwidths of 2 GHz have recently been realized, and the technology is being developed for the realization of 10-GHz bandwidths. Issues of fabrication technology and subsystem integration are examined for superconductive analog signal-processing devices.>