Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Polarization attributes of stimulated Brillouin scattering slow light in fiber

Avi Zadok, Avishay Eyal, Moshe Tur, Luc Thévenaz A

Published Feb 10, 2011• 4 citations

Abstract

The polarization-related properties of stimulated Brillouin scattering (SBS) processes in long, randomly birefringent, standard optical fibers are examined. Evolution equations for the pump and signal waves, in the presence of both birefringence and SBS, are provided in Jones and Stokes spaces. It is shown that in the undepleted pump regime, the amplification of the SBS signal wave is equivalent to that of a linear medium with polarization-dependent gain. The process is associated with a pair of orthogonal states of polarizations (SOPs) of the signal wave, which undergo maximum and minimum amplification. In long, standard fibers, the Jones vector of the probe SOP which corresponds to maximum amplification is aligned with the complex conjugate of the pump wave Jones vector. The maximum and minimum SBS gain coefficients in such fibers equal two-thirds and one-third of the gain coefficient that is predicted by scalar theory, respectively. The large differential gain of the SBS process gives rise to an effective pulling of the amplified Stokes probe wave SOP, towards that of maximum amplification. Lastly, Stokes wave pulses that are aligned for maximum and minimum amplification experience different group delays, which manifest as polarization-related distortions in SBS slow light setups.

DOI: 10.1117/12.880790

Related papers

Polarization Properties of Stimulated Brillouin Scattering and their Implications on Slow and Fast Light

Moshe Tur, Avi Zadok, Elad Zilka +2 more

Vector formalism for stimulated Brillouin scattering amplification in birefringent fibers is used to model the fiber as an equivalent, pseudo-linear, polarization-dependent gain medium. Implications on slow and fast light setups are discussed.

Advances in Optical Sciences CongressJan 1, 20091 citation

Theoretical analysis and experiment performance of slow-light based on stimulated Brillouin scattering (SBS)

Hongyan Zhou, Kun Hua Zhong, Ru Zhang +1 more

Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.

Journal of Physics Conference SeriesFeb 1, 20110 citations

Influence of group-velocity mismatch and inertia of optical nonlinearity on slow-light effects in stimulated inelastic scattering of light

Aleksei M. Zheltikov

Group-velocity mismatch between the pump and Stokes pulses and the inertia of optical nonlinearity are shown to modify scenarios of slow-light evolution of laser pulses accompanying stimulated Raman and Brillouin scattering (SRS and SBS) of light. In the transient regime of SRS and SBS, the inertia of nonlinear polarization of a medium shifts the peak of an amplified Stokes field envelope relative to the input Stokes pulse. This shift is sensitive to the shape of input laser pulses and is controlled by the SRS and/or SBS gain, the damping time of the optical phonon wave, and the delay time between the input pump and Stokes pulses. In the regime where both the inertia of nonlinear polarization of an SRS medium and group-delay effects are significant, stationary modes of the Stokes field may exist in the frame of reference propagating with the group velocity of the pump field. The maximum group delay attainable for such modes of the Stokes field is limited, similar to the steady-state regime, by the ratio of the steady-state SRS gain to the Raman gain bandwidth.

Physical Review ASep 20, 20075 citations

Physical Nature of “Slow Light” in Stimulated Brillouin Scattering

I. Valeri, Gregory Robert, E. Nadezhda

Frontiers in Guided Wave Optics and Optoelectronics 84 absorption is much too high to render the group effect useful.An exciting breakthrough happened in the early nineties when it was shown that group velocities of few tens of meters per second were possible with nonlinear resonance interactions (Hau et al., 1999).Two important features of nonlinear resonances make this possible: substantially reduced absorption, or even amplification, of radiation at a resonance, and sharpness of such resonances; the sharper a resonance, the higher dn/dω and so the stronger the enhancement of group index, and hence the greater the pulse is delayed.Widely ranging applications for slow light have been proposed, of which those for telecommunication systems and devices (optical delay lines, optical buffers, optical equalizers and signal processors) are currently of most interest (Gauthier, 2005).The essential demand of such devices is compatibility with existing telecommunication systems, that is they must be of wide enough bandwidth (≥10 GHz) and able to be integrated seamlessly into such systems.Of the various nonlinear resonance mechanisms and media, which allow sufficiently long induced delays, stimulated Brillouin and Raman scattering (SBS and SRS) in optical fiber are deemed to be among the best candidates.Currently SBS is the most actively investigated and many experimental and theoretical papers on pulse delaying via SBS in optical fiber have been published in the last few years, see the review paper (Thevenaz, 2008) and references therein.In this process the pulse to be delayed is a frequency down-shifted (Stokes) pulse.This is transmitted through an optical fiber through which continuous wave (CW) pump radiation is sent in the opposite direction to prime the delay process.It is supposed that the Stokes pulse is amplified by parametric coupling with the pump wave and a material (acoustic) wave in the medium (Kroll, 1965), and the amplification is characterised by a resonant-type gain profile.The dispersion of refractive index associated with this profile (which is similar to that in Fig. 1) can then be used to increase the group index for optical pulses at the Stokes frequency (Zeldovich, 1972).Along with obvious device compatibility, there are several other advantages of the SL via SBS approach for optical communications systems: slow-light resonance can be created at any wavelength by changing the pump wavelength; use of optical fibre allows for long interaction lengths and thus low powers for the pump radiation, the process runs at room temperature, it uses off the shelf telecom equipment, and SBS works in the entire transparency range of fibers and in all types of fiber.Currently a main obstacle to applications of this approach is the narrow SBS gain spectral bandwidth, (Thevenaz, 2008), which is typically ≈ 120-200 MHz in silica fiber in the spectral range of telecom optical radiation (~1.3-1.6 μm) (Agrawal, 2006).This chapter reviews our ongoing work on the physical mechanisms that give rise to pulse delay in SBS.In section 2 the theoretical background of the SBS phenomenon is given and the main working equations describing this nonlinear interaction are presented.In section 3 ways by which the SBS spectral bandwidth may be increased are addressed.Waveguide induced spectral broadening of SBS in optical fibre is considered as a means of increasing the bandwidth to the multi-GHz range.An alternative way widely discussed in the literature, (Thevenaz, 2008), is based on spectral broadening of the pump radiation.However it is shown through analytic analysis of the SBS equations converted to the frequency domain that pump radiation broadening by any reasonable amount has only a negligible effect on increasing the SBS bandwidth.Importantly in this section we show that, irrespective of the nature of the broadening considered, the SBS gain bandwidth remains www.intechopen.

InTech eBooksFeb 1, 20100 citations

Broadening-free stimulated Brillouin scattering-based slow and fast light in optical fibers

Thomas Schneider, Andrzej Wiatrek

The manipulation of the group velocity of optical signals (slow and fast light) has many possible applications in telecommunications, sensing, nonlinear optics, and so on. The exploitation of the effect of stimulated Brillouin scattering (SBS) is of special interest for the alteration of the group velocity in optical fibers, since it just requires standard telecom equipment and low-to-moderate optical power. However, each delay in one single, low-gain SBS-based slow-light system is accompanied by a pulse broadening. This is a result of the inherent Kramers–Kronig relations among the gain, the phase change, and the accompanied group velocity. For an ideal flat gain, the phase change is nonideal, and for an ideal phase change the gain curve leads to a broadening. Furthermore, if the gain bandwidth is adapted to the signal by broadening, the delay will be reduced. Thus the signal broadening can be reduced by several methods for one single low-gain slow-light system, but it cannot be zero. Here, we will show how a zero-broadening SBS-based slow light can be achieved with several methods. The basic idea is a reshaping of the original pulse in a second stage by saturation of the SBS system, or by the superposition of two gains. As will be shown, all of these systems show an almost ideal overall gain and phase function over the bandwidth of the pulses. Thus, SBS-based slow light with a delay bandwidth product of 1 bit and zero distortion is possible.

Optical EngineeringAug 25, 20140 citations

On the balance between delay, bandwidth and signal distortion in slow light systems based on stimulated Brillouin scattering in optical fibers

Evgeny Shumakher, N. Orbach, Amir Nevet +2 more

We describe systematic measurements of the gain and delay spectra in a slow light system based on stimulated Brillouin scattering in optical fibers. The measurements yield the system complex transfer function with which delays and signal distortion can be calculated for any input signal. The theoretical predictions are confirmed experimentally for single pulses as well as 50 Mb/s data streams in a system which employs pump modulation to modify the gain and delay spectra of the SBS process.

Optics ExpressJan 1, 200646 citations