Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)

Compact experimental apparatus for producing high repetition rate 87Rb Bose Einstein condensation on atom chip

S. J. Kim, Hoon Yu, Ye Lin Moon, J. B. Kim

Published Jun 1, 2013• 0 citations
Publisher

Abstract

We construct a compact experimental apparatus for producing a high repetition rate ultra cold87Rb based on an external atom chip. In this system, we successfully produce Bose-Einstein condensation(BEC) with about 5 sec repetition period.
DOI
10.1109/cleopr.2013.6600614

Related papers

Compact experimental apparatus for producing high-repetition-rate 87Rb Bose-Einstein condensation on an atom chip

Hoon Yu, Seung Jin Kim, Ye Lin Moon +2 more

We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.

Journal of the Korean Physical Society•Aug 1, 2013•5 citations

A Compact, Moveable, Microchip-Based System for High Repetition Rate Production of Bose-Einstein Condensates

Kai Hudek, Daniel Farkas, Evan A. Salim +3 more

We present a compact, moveable system for producing Bose-Einstein condensates (BECs) on an integrated microchip. The system occupies 0.4 m3 and operates as fast as 0.3 Hz. Condensates of 1.9 × 104 atoms in 87Rb have been demonstrated.

Conference on Lasers and Electro-Optics•Jan 1, 2010•0 citations

A compact, transportable, microchip-based system for high repetition rate production of Bose–Einstein condensates

Daniel Farkas, Kai Hudek, Evan A. Salim +3 more

We present a compact, transportable system that produces Bose–Einstein condensates near the surface of an integrated atom microchip. The system occupies a volume of 0.4 m3, operates at a repetition rate as high as 0.3 Hz, and consumes an average power of 525 W. Evaporative cooling in a chip trap with trap frequencies of several kilohertz leads to nearly pure condensates containing 1.9×104 R87b atoms. Partial condensates are observed at a temperature of 1.58(8) μK, close to the theoretical transition temperature of 1.1 μK.

arXiv:0912.0553•Applied Physics Letters•Mar 1, 2010•67 citations

Production of Rubidium Bose-Einstein Condensates at a 1 Hz Rate

Daniel Farkas, Evan A. Salim, Jaime Ramirez-Serrano

We present an experimental apparatus that produces Bose-Einstein condensates (BECs) of $^{87}$Rb atoms at a rate of 1 Hz. As a demonstration of the system's ability to operate continuously, 30 BECs were produced and imaged in 32.1 s. Without imaging, a single BEC could be produced in 953 ms. The system uses an atom chip to confine atoms in a dimple trap with frequencies exceeding 1 kHz. With this tight trap, the duration of evaporative cooling was reduced to less than 0.5 s. Using principal component analysis, insight into the largest sources of noise and drift was obtained by extracting the dominant contributions to the variance. The system utilizes a compact physics package that can be integrated with lasers and electronics to create a transportable ultracold-atom device for applications outside of a laboratory environment.

arXiv:1403.4641•Mar 18, 2014•11 citations

High-performance experimental apparatus for large atom number 87Rb Bose-Einstein condensates

Jiho Noh, Sung Jong Park, Chang Yong Park +3 more

We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.

Journal of the Korean Physical Society•Oct 1, 2012•4 citations

The design and construction of a Bose-Einstein condensation apparatus

A. M. Jofre

This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (

•Jan 1, 2004•2 citations
We construct a compact experimental apparatus for producing high-repetition-rate ultra cold 87Rb atom based on an external atom chip. Initially, we produce an atomic flux from a 2D+ MOT (magneto-optical trap) in a nearly isolated 2D+ MOT chamber and improve the flux by adjusting the cooling beam detuning of the 2D+ MOT. The flux is trapped in the 3D MOT for 1.2 s and is further cooled by performing compressing the MOT for 20 ms and using polarization gradient cooling for 6.2 ms. After optical pumping into the 5S F = 2 (m F = 2) ground state, we transport atoms toward the chip surface by performing external Z coil trapping. At 1 mm below the chip surface, the external Z coil trap is completely switched to an atom chip trap by using a Z wire and a dimple wire on the chip with external bias fields. The transport and the switching take totally 520 ms. The number of atoms trapped on the atom chip is measured to be about 2 × 107. After the atoms has been compressed for 100 ms to increase trap frequencies, we perform RF evaporative cooling in the RF frequency range from 32 MHz to 6.82 MHz for 2.4 seconds. The final number of atoms in the atomic cloud after RF cooling is 1.2 × 105 atoms, and we are able to observe some Bose-Einstein condensation. The repetition rate for producing the condensation is 0.234 Hz. In this paper, we describe our experimental apparatus and processes.
We present a compact, transportable system that produces Bose–Einstein condensates near the surface of an integrated atom microchip. The system occupies a volume of 0.4 m3, operates at a repetition rate as high as 0.3 Hz, and consumes an average power of 525 W. Evaporative cooling in a chip trap with trap frequencies of several kilohertz leads to nearly pure condensates containing 1.9×104 R87b atoms. Partial condensates are observed at a temperature of 1.58(8) μK, close to the theoretical transition temperature of 1.1 μK.
We present an experimental apparatus that produces Bose-Einstein condensates (BECs) of 87^{87}87Rb atoms at a rate of 1 Hz. As a demonstration of the system's ability to operate continuously, 30 BECs were produced and imaged in 32.1 s. Without imaging, a single BEC could be produced in 953 ms. The system uses an atom chip to confine atoms in a dimple trap with frequencies exceeding 1 kHz. With this tight trap, the duration of evaporative cooling was reduced to less than 0.5 s. Using principal component analysis, insight into the largest sources of noise and drift was obtained by extracting the dominant contributions to the variance. The system utilizes a compact physics package that can be integrated with lasers and electronics to create a transportable ultracold-atom device for applications outside of a laboratory environment.
We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.
This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (