We propose a system for realizing controllable optomechanically induced transparency (OMIT) and ponderomotive squeezing. In this system, an atomic ensemble driven by an external optical field couples with the cavity field in a typical optomechanical cavity. When the cavity is driven by a coupling laser and a probe laser, we can produce a switch for the probe field and adjust the width of the transparency window flexibly by manipulating the coupling strength between the atomic ensemble and the external optical field. We also investigate the ponderomotive squeezing properties of the transmitted field by analyzing its spectrum. Interestingly, the coupling strength between the atomic ensemble and the cavity field plays an important role in controlling the squeezing properties and the squeezing spectrum presents distinct features at red-detuned and blue-detuned frequencies by adjusting the coupling strength.
We propose a system for realizing controllable optomechanically induced transparency (OMIT) and ponderomotive squeezing. In this system, an atomic ensemble driven by an external optical field couples with the cavity field in a typical optomechanical cavity. When the cavity is driven by a coupling laser and a probe laser, we can produce a switch for the probe field and adjust the width of the transparency window flexibly by manipulating the coupling strength between the atomic ensemble and the external optical field. We also investigate the ponderomotive squeezing properties of the transmitted field by analyzing its spectrum. Interestingly, the coupling strength between the atomic ensemble and the cavity field plays an important role in controlling the squeezing properties and the squeezing spectrum presents distinct features at red-detuned and blue-detuned frequencies by adjusting the coupling strength.
Abstract We investigate the optical-response properties of a coherent-mechanical pumped optomechanical system (OMS) coupled to a Λ-type three-level atomic ensemble. Due to the optomechanical and the cavity-atom couplings, the optomechanically induced transparency (OMIT) and electromagnetically induced transparency (EIT) phenomena could both be observed from our proposal. In the presence of a coherent mechanical pump, we show that the OMIT behavior of the probe field exhibits a phase-dependent effect, leading to the switch from OMIT to optomechanically induced absorption or amplification, while the feature of EIT remains unchanged. The distinctly different effects of the mechanical pump on OMIT and EIT behavior assure us that the absorption (amplification) and transparency of the output probe field can be simultaneously observed. Moreover, a tunable switch from slow to fast light can also be realized by tuning the phase and amplitude of the mechanical pump. In particular, the presence of the atomic ensemble can further adjust the group delay, providing additional flexibility for achieving the tunable switch.
Abstract Optomechanics has become a very active area of research in recent years and has attracted significant interest in both theoretical and experimental studies. In this work, we theoretically investigate optomechanically induced transparency (OMIT) using a hybrid system consisting of two coupled optical cavities, each interacting with a spin ensemble. The cavities are coherently driven by a strong control field and a weak probe field. We analytically calculate the transmission spectrum of the coupled spin–cavity system and analyze the dynamics of the system. The obtained transmission response shows clear signatures of multi-window OMIT, which arises from coherent interference between the hybridized normal modes. Our results indicate that the presence of spin ensembles in both cavities significantly enhances the transparency behavior and provides additional tunable parameters to control the OMIT windows. In particular, the transmission spectrum and the shape of the transparency profile can be controlled by the spin–cavity interaction and the inter-cavity coupling strength J . Furthermore, the inter-cavity tunneling rate, spin decoherence, and spin–cavity coupling strength strongly influence the transparency properties. Overall, this study highlights the potential of spin-based multi-cavity optomechanical systems for coherent optical control and tunable quantum interference.
We propose a system for achieving some adjustable quantum coherence effects, including the normal-mode splitting (NMS), the optomechanically induced transparency (OMIT), and the optomechanically induced absorption (OMIA). In this system, two tunnel-coupled optomechanical cavities are each driven by a coupling field and coupled to an atomic ensemble. Besides, one of the cavities is also injected with a probe field. When the system works under different conditions, we can obtain the NMS, the OMIT, and the OMIA, respectively. These effects can be flexibly adjusted by the tunnel coupling between the two cavities, the power of the coupling lasers, and the coupling strength between the atomic ensembles and the cavity fields. Furthermore, we can realize the OMIT even if the oscillating mirrors have relatively larger decay rates.
In recent years, due to the rapid development of nano science and advanced semiconductor technology, one is able to observe more significant quantum optomechanical effects as optomechanical system turns smaller in size. Optomechanically induced transparency, fast and slow light, optical storage as well as other quantum optical and nonlinear optical effects have become the focus of research. On the other hand, the optomechanical systems coupled to other small subsystems (such as atoms, quantum dots, single electron transistors, etc.) also attract great attention in research. This is because the coupling system has not only provided more degrees of freedom for quantum manipulation, but also opened up more channels for classical and quantum information transfer. In this paper we study the optomechanically induced transparency and fast/slow light phase control in atom-assisted optomechanical cavity. Unlike the traditional systems, in this model the mechanical resonator is directly driven by a weak auxiliary driving field. We therefore find that with the change of amplitude ratio and phase difference between the auxiliary driving field and the probe field, the absorption and dispersion properties of the whole system and the group delay time vary accordingly. In the absence of auxiliary field, we observe the spectral features of the hybrid electromagnetically induced transparency and optomechanically induced transparency (OMIT) in an atom-cavity-oscillator tripartite optomechanical system. When there exists no phase difference between the auxiliary field and the probe field, we find that the membrane resonance absorption is enhanced with the increase of auxiliary field strength at resonance, causing the the optomechanically induced transparency to be suppressed, and therefore we can modify the amplitude of auxiliary field to control the depth of the OMIT window. When keeping amplitude ratio between the auxiliary field and the probe field unchanged, the modification of the phase difference between the auxiliary field and the probe field directly affects the we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption", "transparent" and "gain" of the system. Therefore, through changing the phase of auxiliary field and probe field, we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption" , "transparent" and "gain". In the meantime, we find that the system’s group delay time varies periodically with the change of phase difference. It is worth noting that by adjusting the phase difference and the atomic number, we can not only change the magnitude of the group delay, but also realize the conversion between slow light and fast light effect.
Abstract We study the reflected and transmitted output properties of a weak probe field incident upon an optomechanical cavity separated by a membrane oscillator and filled with two-level cold atoms. We find that electromagnetically induced transparency (EIT) and optomechanically induced transparency (OMIT) may simultaneously exist owing to separate cavity–atom coupling and cavity-oscillator coupling, respectively. It is more interesting that the hybrid EIT and OMIT phenomena can be manipulated on demand to exhibit various spectral features on dispersion, transmission, and reflection. In particular, we discover the new hybrid double transparency window (a narrow OMIT dip appearing inside the wide EIT window), analogous to double EIT for a four-level atomic system in inverted-Y configuration. Meanwhile, we can reduce the hybrid EIT–OMIT to a single EIT or OMIT shape by changing the magnitude of the driving field power or the atomic number as desired. Furthermore, by changing the system’s detuning it is possible to change the location and the profile of the EIT, therefore switching the shape of the hybrid EIT–OMIT from symmetric to asymmetric, as well as for the profile to change from a absorption dip-like EIT to dispersion-like EIT in both real and imaginary parts of the output probe field. Also, by modifying system’s detuning we have control over the distribution of the output energy, something difficult to achieve with only one of the sub-systems available.
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon in a hybrid optomechanical system composing of an optomechanical cavity and a traditional one. A Kerr medium is inserted in the optomechanical cavity and the other traps the atomic ensemble. We demonstrate the appearance of electromagnetically and optomechanically induced transparency when there is only Kerr medium or atoms in the system. We give an explicit explanation for the mechanism of the transparency. Moreover, we set up new scheme for the measurement of Kerr coefficient and the single atom-photon coupling strength. It is shown that Kerr nonlinearity can inhibit the normal mode splitting (NMS) when the tunnel strength is strong coupling. Furthermore, in the output field, slow light and fast light are converted to realize the tunable switch from slow light to fast light. This study has some important guiding significance in the fields of the high precision measurement and quantum information processing.