Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Four-Josephson-junction flux qubit with controllable energy gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

Published Feb 1, 2009• 4 citations
Publisher

Abstract

We report the measurements of a double-loop four-Josephson-junction flux qubit. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz.

DOI
10.1088/1742-6596/150/2/022075

Related papers

Characterization of a Double-Loop Four-Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.

Book Publisher International (a part of SCIENCEDOMAIN International)•Aug 19, 2024•0 citations

Spectroscopy of Josephson-Junction Flux Qubit with Controllable Energy Gap

Yoshihiro Shimazu, Y. Saito, Z. Wada

A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.

Journal of the Physical Society of Japan•Jun 10, 2009•8 citations

Gradiometric flux qubits with tunable gap

M. J. Schwarz, Jan Goetz, Z Jiang +3 more

Abstract. For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit’s Josephson junctions by a dc SQUID, the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

•Aug 17, 2016•36 citations

Tunability of Excited-State Energy Levels of Four-Josephson-Junction Circuit in Crossover from Double-Well to Single-Well Potential

Yoshihiro Shimazu

A double-loop four-Josephson-junction (4-JJ) flux qubit is a tunable qubit wherein the potential profile can be varied in situ via two applied magnetic fluxes. This provides a high level of control over state transitions. Here, we report the results of spectroscopic measurements on this system. We observed microwave resonances associated with the first and second excited states. A branch of resonances that is most likely attributable to the third excited state was also observed. The excitation energy spectra for these levels were in qualitative agreement with the results of simplified calculations performed using an effective Hamiltonian with two phases. The three lowest levels characterized in this study may allow novel applications, including those proposed theoretically in the past. Our analysis showed that the potential exhibited a crossover from the commonly used double-well regime to the novel single-well regime. This indicates the possibility of manipulation and readout of a 3-JJ (and 4-JJ) qubit in the single-well regime using a simple technique.

arXiv:1105.0263•Journal of the Physical Society of Japan•Apr 25, 2011•3 citations

Gradiometric flux qubits with a tunable gap

M J Schwarz, J Goetz, Z Jiang +4 more

For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.

arXiv:1210.3982•New Journal of Physics•Apr 4, 2013•36 citations

Flux qubit with a large loop size and tunable Josephson junctions

Hui Deng, Haifeng Yu, Guangming Xue +6 more

We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.

Chinese Physics B•Apr 1, 2012•2 citations
We report the measurements of a double-loop four-Josephson-junction flux qubit. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz.
Superconducting qubits are employed for the practical implementation of scalable quantum information processors. Fault-tolerant quantum computation schemes using superconducting qubits is under intensive study. Among the various kinds of superconducting qubits, flux qubits have a significant advantage in that they can be made insensitive to randomly fluctuating charges in the substrate. Here, the characterization results of a double-loop four-Josephson-junction flux qubit is reported. By varying the magnetic flux in one of the two loops, the energy gap at the classical degeneracy point can be controlled in situ. The basic operation of the system is illustrated by the appearance of a qubit step on a two-dimensional flux map. The energy gap can be indirectly estimated from the shape of the qubit step. The dependence of the shape of the qubit step on the control flux, which is analyzed in terms of the step height and maximum slope, is in good agreement with the simulation results, thereby implicitly indicating that the energy gap is varied from almost zero, less than the thermal energy, to a value higher than 50 GHz. Spectroscopic measurements directly demonstrated the controllability of the energy gap. In addition, doublet splitting due to intercell tunneling was observed for the first time.
A double-loop four-Josephson-junction (4-JJ) flux qubit has an advantage over a three-Josephson-junction flux qubit in that the energy gap Δ at the symmetry point can be controlled in situ by varying the magnetic flux in one of the two loops. We report the results of a microwave spectroscopy measurement of a 4-JJ qubit. The magnetic fluxes in the two loops were controlled via a magnetic field and control flux. The excitation energy spectra at various values of control flux indicate the tunability of Δ via the control flux. Two branches of the excitation spectra were observed.
Abstract. For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit’s Josephson junctions by a dc SQUID, the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.
A double-loop four-Josephson-junction (4-JJ) flux qubit is a tunable qubit wherein the potential profile can be varied in situ via two applied magnetic fluxes. This provides a high level of control over state transitions. Here, we report the results of spectroscopic measurements on this system. We observed microwave resonances associated with the first and second excited states. A branch of resonances that is most likely attributable to the third excited state was also observed. The excitation energy spectra for these levels were in qualitative agreement with the results of simplified calculations performed using an effective Hamiltonian with two phases. The three lowest levels characterized in this study may allow novel applications, including those proposed theoretically in the past. Our analysis showed that the potential exhibited a crossover from the commonly used double-well regime to the novel single-well regime. This indicates the possibility of manipulation and readout of a 3-JJ (and 4-JJ) qubit in the single-well regime using a simple technique.
For gradiometric three-Josephson-junction flux qubits, we perform a systematic study on the tuning of the minimal transition frequency, the so-called qubit gap. By replacing one of the qubit's Josephson junctions by a dc superconducting quantum interference device (SQUID), the critical current of this SQUID and, in turn, the qubit gap can be tuned in situ by a control flux threading the SQUID loop. We present spectroscopic measurements demonstrating a well-defined controllability of the qubit gap between zero and more than 10 GHz. This is important for tuning the qubit into and out of resonance with other superconducting quantum circuits in scalable architectures, while still operating it at its symmetry point with optimal dephasing properties. The experimental data agree very well with model calculations based on the full qubit Hamiltonian. From a numerical fit, we determine the Josephson coupling and the charging energies of the qubit junctions. The derived values agree well with those measured for other junctions fabricated on the same chip. We also demonstrate the biasing of gradiometric flux qubits near the symmetry point by trapping an odd number of flux quanta in the gradiometer loop. In this way, we study the effect of the significant kinetic inductance, thereby obtaining valuable information for the qubit design.
We present the design of a superconducting flux qubit with a large loop inductance. The large loop inductance is desirable for coupling between qubits. The loop is configured into a gradiometer form that could reduce the interference from environmental magnetic noise. A combined Josephson junction, i.e., a DC-SQUID is used to replace the small Josephson junction in the usual 3-JJ (Josephaon junction) flux qubit, leading to a tunable energy gap by using an independent external flux line. We perform numerical calculations to investigate the dependence of the energy gap on qubit parameters such as junction capacitance, critical current, loop inductance, and the ratio of junction energy between small and large junctions in the flux qubit. We suggest a range of values for the parameters.