Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Millimeter-Wave Radiation From Misaligned $ \hbox{Tl}_{2}\hbox{Ba}_{2}\hbox{CaCu}_{2}\hbox{O}_{8}$ Thin-Film Intrinsic Josephson Junctions

P. Wang, Zh Wang, Bin Fan, Wei Li Xie, Xinjie Zhao, M. He, Xinzheng Zhang, Lu Ji, S.L. Yan

Published Sep 1, 2012• 3 citations
Publisher

Abstract

We have measured the current-voltage characteristics of misaligned Tl2Ba2CaCu2O8thin-film intrinsic Josephson junctions (IJJs) embedded in a quasi-optical resonator at 78.5 K. The substrate is regarded as a dielectric resonator to improve high-frequency electromagnetic coupling between the IJJs. The experimental result is fitted well with the electromagnetic simulation. Radiation power larger than 10 pW has been detected at 75.6 GHz. Moreover, the phenomenon of jump voltage is explored, and a possible explanation is discussed.

DOI
10.1109/tasc.2012.2199747

Related papers

Millimeter-wavelength radiation from arrays of discrete high-temperature superconductor Josephson junctions

Fangfang Song, M. Levitchev, Vadim A. Markelov +3 more

Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.

Superconductor Science and Technology•Feb 22, 2010•5 citations

Coupling of a Tl2Ba2CaCu2O8Thin Film Intrinsic Josephson Junction and a Fabry—Perot Resonator

Bin Fan, Zheng Wang, Hong-Wei Yue +6 more

We study the electromagnetic coupling mechanism of a Tl 2 Ba 2 CaCu 2 O 8 (Tl-2212) thin film intrinsic Josephson junction to a hemispherical Fabry—Perot resonator. An effective model to analyze coupling mechanism is put forward. The dielectric substrate is used as a dielectric resonator antenna and the Josephson junction, and a superconducting film is used as the feed line to excite a resonance mode inside the dielectric resonator antenna. To confirm this method, two Josephson junction samples with different dimensions of substrate and shapes of superconducting film are fabricated and tested under microwave irradiations. At the same time, numerical simulations of the antenna characteristics and the field distribution of these samples are performed by numerical simulation. The different coupling intensities of the two samples with the Fabry—Perot resonator fit well with the numerical simulation results. The proposed model is important for Josephson junctions used in the microwave field.

Chinese Physics Letters•Mar 1, 2011•5 citations

Experiments on tunable Josephson millimeter-wave oscillators

Matteo Cirillo, I. Modena, P. Carelli +3 more

The coupling of millimeter-wave radiation from a long Josephson junction to a small-area junction is discussed. The coupling is obtained by means of thin-film technology and the design parameters allowing radiation coupling are discussed. Since the frequency of the oscillator radiation is smaller than the plasma frequency of the detector junction, the latter shows evidence of chaotic dynamics in the current-voltage characteristic. However, very stable zero-crossing bias steps appear for high values of the applied radiation power. The tunability of the oscillator power allows measuring the dependence of the detector critical current on the external radiation to be measured; from this measured dependence and from the observed amplitude of the photon-assisted tunneling steps it is estimated that maximum coupled power is the range of tens of nanowatts.

IEEE Transactions on Magnetics•Mar 1, 1991•4 citations

Untuned Josephson detectors of microwave and millimeter-wave radiation

C. K. So, William O. Hamilton

The intrinsic response of Josephson junctions to microwave and far-infrared radiation is studied. Junctions are formed by pressing a Nb or Nb-Ti pointed wire onto a Nb thin film which in turn is pressed against the open end of a waveguide. Electromagnetic radiation is applied through the back of the film so that only the wave magnetic field is coupled to the junction. The change of the dc Josephson current is monitored at different levels of microwave power over a frequency range from 22 to 105 GHz. The dependence of the responsivity of these currents on film thickness over a range from 50 to 500 Å is studied. The observed responsivity agrees very well with that predicted by theory. Higher responsivity is observed for thinner films and lower microwave frequencies. The observed responsivity of a 50-Å film junction at 22 GHz is (6±3) ×10−2 V/W. To facilitate comparison of our results with other experiments, a more conventional coupling configuration in which the wave electric field rather than the wave magnetic field is coupled to the junction is studied. The results are comparable with other experiments with the responsivity in the E field coupling case 106 times larger than in the B field coupling configuration. We demonstrate that for successful use of simple Josephson junction detectors in the microwave and millimeter region it seems crucial to impedance match the junctions to the radiation source, probably by making them a part of a resonant structure.

Journal of Applied Physics•May 1, 1977•1 citation

Millimeter wave irradiation characteristics of high temperature superconductor bicrystal Josephson junction embedded in a Fabry-Perot resonator

Yue Hong-Wei, Yan Shao-lin, Zhou Tie-Ge +10 more

The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.

Acta Physica Sinica•Jan 1, 2010•1 citation

THz Radiation Measurement with HTSC Josephson Junction Detector Matched to Planar Antenna

Eldad Holdengreber, Aviv Glezer Moshe, S. E. Schacham +3 more

Superconducting Josephson junctions have major advantages as detectors of millimeter wave radiation. Frequency of the radiation can be easily derived from the Shapiro steps of the current-voltage characteristics. However, system performance is highly sensitive to impedance mismatch between the antenna and the junction; therefore, optimization is essential. We analyzed and implemented an improved antenna structure, in which the junction is displaced from the antenna center and placed between the ends of two matching strips. Based on theoretical analysis and advanced electromagnetic simulations, we optimized strip dimensions, which affect both the detection magnitude and the frequency of the reflection coefficient dip. Accordingly, two Au bow-tie antennas with different matching strip widths were fabricated. Superconducting Yttrium Barium Copper Oxide (YBCO) thin films were deposited exactly at the bicrystal substrate misorientation points, forming Josephson junctions at the ends of two matching strips. We found a very high correlation between the simulations and the response to Radio Frequency (RF) radiation in the range of 145–165 GHz. Experimental results agree extremely well with the design, showing best performance of both antennas around the frequency for which impedance matching was derived.

Applied Sciences•Sep 17, 2020•7 citations
We have measured the current-voltage characteristics of misaligned Tl2Ba2CaCu2O8thin-film intrinsic Josephson junctions (IJJs) embedded in a quasi-optical resonator at 78.5 K. The substrate is regarded as a dielectric resonator to improve high-frequency electromagnetic coupling between the IJJs. The experimental result is fitted well with the electromagnetic simulation. Radiation power larger than 10 pW has been detected at 75.6 GHz. Moreover, the phenomenon of jump voltage is explored, and a possible explanation is discussed.
Josephson junction arrays could be competitive candidates for radiation sources in the frequency range from 0.5 to 1.5 THz. This is the range where compact solid-state continuous wave sources are most lacking. We investigated the millimeter-wave radiation from arrays of high-temperature superconductor bicrystal Josephson junctions embedded in a quasi-optical resonator. The novel approach of utilizing the intrinsic resonance modes of the substrate to improve the impedance coupling between the series array of discrete Josephson junctions and the quasi-optical resonator was investigated by experiments and electromagnetic field simulations. Radiation from the arrays containing up to 536 junctions was detected at about 80 GHz and liquid nitrogen temperature using a low-noise receiver. The detected maximum radiation power of the arrays was about 50 pW and the peak voltage agreed exactly with the Josephson current–voltage relation.
We study the electromagnetic coupling mechanism of a Tl 2 Ba 2 CaCu 2 O 8 (Tl-2212) thin film intrinsic Josephson junction to a hemispherical Fabry—Perot resonator. An effective model to analyze coupling mechanism is put forward. The dielectric substrate is used as a dielectric resonator antenna and the Josephson junction, and a superconducting film is used as the feed line to excite a resonance mode inside the dielectric resonator antenna. To confirm this method, two Josephson junction samples with different dimensions of substrate and shapes of superconducting film are fabricated and tested under microwave irradiations. At the same time, numerical simulations of the antenna characteristics and the field distribution of these samples are performed by numerical simulation. The different coupling intensities of the two samples with the Fabry—Perot resonator fit well with the numerical simulation results. The proposed model is important for Josephson junctions used in the microwave field.
The coupling of millimeter-wave radiation from a long Josephson junction to a small-area junction is discussed. The coupling is obtained by means of thin-film technology and the design parameters allowing radiation coupling are discussed. Since the frequency of the oscillator radiation is smaller than the plasma frequency of the detector junction, the latter shows evidence of chaotic dynamics in the current-voltage characteristic. However, very stable zero-crossing bias steps appear for high values of the applied radiation power. The tunability of the oscillator power allows measuring the dependence of the detector critical current on the external radiation to be measured; from this measured dependence and from the observed amplitude of the photon-assisted tunneling steps it is estimated that maximum coupled power is the range of tens of nanowatts.
The intrinsic response of Josephson junctions to microwave and far-infrared radiation is studied. Junctions are formed by pressing a Nb or Nb-Ti pointed wire onto a Nb thin film which in turn is pressed against the open end of a waveguide. Electromagnetic radiation is applied through the back of the film so that only the wave magnetic field is coupled to the junction. The change of the dc Josephson current is monitored at different levels of microwave power over a frequency range from 22 to 105 GHz. The dependence of the responsivity of these currents on film thickness over a range from 50 to 500 Å is studied. The observed responsivity agrees very well with that predicted by theory. Higher responsivity is observed for thinner films and lower microwave frequencies. The observed responsivity of a 50-Å film junction at 22 GHz is (6±3) ×10−2 V/W. To facilitate comparison of our results with other experiments, a more conventional coupling configuration in which the wave electric field rather than the wave magnetic field is coupled to the junction is studied. The results are comparable with other experiments with the responsivity in the E field coupling case 106 times larger than in the B field coupling configuration. We demonstrate that for successful use of simple Josephson junction detectors in the microwave and millimeter region it seems crucial to impedance match the junctions to the radiation source, probably by making them a part of a resonant structure.
The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.
Superconducting Josephson junctions have major advantages as detectors of millimeter wave radiation. Frequency of the radiation can be easily derived from the Shapiro steps of the current-voltage characteristics. However, system performance is highly sensitive to impedance mismatch between the antenna and the junction; therefore, optimization is essential. We analyzed and implemented an improved antenna structure, in which the junction is displaced from the antenna center and placed between the ends of two matching strips. Based on theoretical analysis and advanced electromagnetic simulations, we optimized strip dimensions, which affect both the detection magnitude and the frequency of the reflection coefficient dip. Accordingly, two Au bow-tie antennas with different matching strip widths were fabricated. Superconducting Yttrium Barium Copper Oxide (YBCO) thin films were deposited exactly at the bicrystal substrate misorientation points, forming Josephson junctions at the ends of two matching strips. We found a very high correlation between the simulations and the response to Radio Frequency (RF) radiation in the range of 145–165 GHz. Experimental results agree extremely well with the design, showing best performance of both antennas around the frequency for which impedance matching was derived.